螺旋轴棱锥的光束传输特性

 分析了螺旋轴棱锥的结构和光传输特性,基于衍射积分理论研究了发散球面波和拉盖尔-高斯光束经螺旋轴棱锥后的传输过程。研究表明,发散球面波经过螺旋轴棱锥后产生贝塞尔光束,其阶数与拓扑电荷数相同,但中心光斑（空心光斑）半径随传输距离的增加而变大;拉盖尔-高斯光束入射后同样产生贝塞尔光束,但其阶数变为拉盖尔-高斯光束和螺旋轴棱锥的拓扑电荷数之和,出射光束的拓扑电荷数与阶数相等。     

Analysis of Ar line spectra from indirectly-driven implosion experiments on SGII facility

This paper reports on the indirectly-driven implosion experiments on SGII laser facility in which Ar emission spectrum from Ar-doped D-filled plastic capsule is recorded with the crystal spectrometer. Spectral features of Ar Heβ line and its associated satellites are analysed to extract the electron temperature and density of the implosion core. Non local thermal equilibrium (NLTE) collisional-radiative atomic kinetics and Strark broadening line shape are included in the present calculation. By comparing the calculated spectrum with the measured one, the core electron temperature and density are inferred to be 700 eV and 2.5×10²³ cm^-3 respectively. With these inferred values of electron temperature and density, neutron yield can be estimated to agree with the measured value in magnitude despite of the very simple model used for the estimation.     

大块金属玻璃Zr41Ti14Cu12.5Ni10Be22.5的流变行为研究

采用静态拉伸方法在连续升温条件下动态地测量了大块金属玻璃Zr41Ti14Cu12.5Ni10Be22.5（Vit1）的黏度随温度的变化关系.在应变速率与温度的关系曲线中，观测到了与玻璃转变和晶化过程相联系的多个应变速率峰.在玻璃转变温度Tg以上，大块金属玻璃Zr41Ti14Cu12.5Ni10Be22.5的过冷液体呈现Newton流体特征，其黏度与温度的关系符合Vogel Fulcher-Tammann (VFT)关系式，拟合得到脆度D*＝36，VFT温度T0＝319K，脆度参数m＝30，这说明Zr41T 关键词： 大块金属玻璃 应变速率 剪切黏度 自由体积     

Optically controlled SiCGe/SiC heterojunction transistor with charge-compensation layer

A novel optically controlled SiCGe/SiC heterojunction transistor with charge-compensation technique has been simulated by using commercial simulator.This paper discusses the electric field distribution,spectral response and transient response of the device.Due to utilizing p-SiCGe charge-compensation layer,the responsivity increases nearly two times and breakdown voltage increases 33%.The switching characteristic illustrates that the device is latch-free and its fall time is much longer than the rise time.With an increase of the light power density and wavelength,the rise time and fall time will become shorter and longer,respectively.In terms of carrier lifetime,a compromise should be made between the responsivity and switching speed,the ratio of them reaches maximum value when the minority carrier lifetime equals 90 ns.     

Adiabatic condition for nonlinear systems

The adiabatic approximation is an important concept in quantum mechanics. In linear systems, the adiabatic condition is derived with the help of the instantaneous eigenvalues and eigenstates of the Hamiltonian, a procedure that breaks down in the presence of nonlinearity. Using an explicit example relevant to photoassociation of atoms into diatomic molecules, we demonstrate that the proper way to derive the adiabatic condition for nonlinear mean-field (or classical) systems is through a linearization procedure, using which an analytic adiabatic condition is obtained for the nonlinear model under study.     

叶片弯、掠对压气机端壁流动的影响

通过壁面静压测量、流场显示及气动探针测量研究了不同掠型叶片组成的平面扩压叶栅特性。结果表明,前掠 叶栅流道中横向压力梯度减弱,型面压力沿叶展呈反“C”型,有利于减弱角区低能流体堆积,但中径处损失有所增加; 弯掠叶片强化了上述趋势,其降低端部损失和延缓角区分离的能力更强,应从优化设计角度对其进行深入研究。     

合肥光源二分割三角型光位置检测器的研制

介绍了一种用于合肥光源的二分割三角型光位置检测器的研制,对其主要性能(如灵敏度和线性范围)进行了理论分析和实际测量,测量结果与理论分析相当吻合.文中还给出了光位置测量系统的组成     

单模光纤激光极限功率的数值研究

对光纤激光极限功率的探索和其受限因素的分析, 有利于为大功率光纤激光器的发展提供理论依据和实验指导. 本文考虑热效应、光效应、非线性效应和抽运亮度等因素对光纤激光极限功率的影响, 分析了掺镱和掺铥光纤的极限功率和受限因素. 在此基础上, 结合激光在光纤中单模传输的条件, 计算了单模掺镱和掺铥光纤激光的极限功率. 计算结果表明, 在现有技术条件下, 使用常规的976 nm和793 nm激光二极管抽运, 单模掺镱和掺铥光纤激光的极限功率分别为4.2 kW和7.8 kW, 其中单模掺铥光纤激光的功率水平还远低于它的极限功率的原因是受抽运亮度的限制. 最后分析指出减小纤芯的数值孔径和改进少模光束的光束质量是提升单模光纤激光极限功率的重要途径.     

1 MV紧凑型重频Marx发生器绝缘设计和数值分析

通过分析六氟化硫气体在静态高电压和脉冲高电压作用下的绝缘特性对Marx模块式开关结构和外筒尺寸进行了优化设计,着重优化设计了Marx发生器中的两个关键绝缘部位——开关腔体结构和外金属筒与顶部电容绝缘距离,并通过数值模拟计算,分析了该区域的局部3维电场强度分布。结果表明:最大场强均小于六氟化硫的沿面闪络和电击穿场强阈值。对模块式开关腔和外筒尺寸进行优化得到的绝缘结构满足0.3 MPa下六氟化硫的绝缘要求。     

小孔等离子体运动实验方法

在间接驱动惯性约束聚变的黑腔中,辐射烧蚀的高Z等离子体的流体力学运动过程对激光注入黑腔的效率、辐射场均匀性和通过诊断口的黑腔辐射温度诊断都有显著影响。为研究诊断口在黑腔辐射场中的等离子体缩口过程,用激光产生X光辐射加热低Z泡沫填充的金黑腔诊断口,以激光辐照钛平面靶产生的2～5 keV高能段窄能区X光作为背光源,用X光分幅相机获得了源靶和小孔靶两种靶型的小孔等离子体运动过程图像,研究了X光烧蚀的小孔等离子体的流体力学运动过程,探索了定量测量小孔等离子体面密度的空间分布与时间演化过程的实验诊断方法,初步给出小孔等离子体的面密度。