1 MV紧凑型重频Marx发生器绝缘设计和数值分析

通过分析六氟化硫气体在静态高电压和脉冲高电压作用下的绝缘特性对Marx模块式开关结构和外筒尺寸进行了优化设计,着重优化设计了Marx发生器中的两个关键绝缘部位——开关腔体结构和外金属筒与顶部电容绝缘距离,并通过数值模拟计算,分析了该区域的局部3维电场强度分布。结果表明:最大场强均小于六氟化硫的沿面闪络和电击穿场强阈值。对模块式开关腔和外筒尺寸进行优化得到的绝缘结构满足0.3 MPa下六氟化硫的绝缘要求。     

基于Web技术的网络拓扑图生成方法的研究

综合采用提取路由表和地址转发表的方法，对网络逻辑拓扑结构和物理拓扑结构进行自动探索，提出了用于优化显示网络拓扑图的一种显示算法，采用Java技术实现了基于Web的网络拓扑图，并对在实现过程中遇到的问题进行了探讨。试验结果表明，由此生成的网络拓扑图准确、美观、能够实现跨平台和跨区域的管理。     

北京谱仪Ⅱ带电径迹测量误差矩阵的修正

研究了北京谱仪(BES)Ⅱ带电径迹测量误差矩阵的修正,使运动学拟合TELESIS方法在BESⅡ物理数据分析中得到应用.1)在BESⅡ数据重建程序中,加入了适当的MDC重建单丝分辨率(250μm)和Q修正.2)在TELESIS程序中,放入了BESⅡ有效物质量对BESⅡ误差矩阵进行多次库仑散射和dE/dX能损效应的修正.3)在此基础上,通过J/ψ→μ⁺μ^－的数据样本分析,完成了BESⅡ24×10⁶J/ψ事例RUN-by-RUN的误差矩阵刻度,同时对BESⅡMC数据也作了相应的刻度.经上述误差矩阵修正后,BESⅡ的TELESIS可以较好地满足BESⅡ数据分析工作的要求.     

Propagation of Airy beams from right-handed material to left-handed material

Based on the ABCD matrix formalism,the propagation property of an Airy beam from right-handed material(RHM) to left-handed material(LHM) is investigated.The result shows that when the Airy beam propagates in the LHM,the intensity self-bending due to its propagation in the RHM can be compensated.In particular,if the propagation distance in the RHM is equal to that in the LHM and the refractive index of the LHM is n L =-1,the transverse intensity distribution of the Airy beam can return to its original state.     

Experimental investigation on partially coherent higher-order non-diffractive beams

We experimentally study the generation of a partially coherent non-diffractive beam by focusing a partially coherent vortex beam with an axicon. The investigation results show that when the partially coherent vortex beam is focused by the axicon, the beam is transferred into a partially coherent higher-order non-diffractive beam. In the non-diffractive zone, the transverse intensity distribution of the partially coherent higher-order non-diffractive beam is invariant during propagation. In addition, the range of the non-diffractive zone is related to the coherence of the partially coherent vortex beam. The poorer the coherence of the partially coherent vortex beam, the shorter the range of the non-diffractive zone.     

一种车用单刀双掷开关的质检仪器研发

介绍了一种车用单刀双掷开关质量检测仪器的研发,包括检测系统的硬件设计、检测原理以及算法软件开发。首先,根据单刀双掷开关的工作原理及质量检测要求,开发了检测手指触觉压力的机械装置,以及控制开关通道切换的继电器控制电路;在此基础上,开发了相应的检测算法,可实现对开关切换状态、电压差以及手指触觉压力进行自动化的数据采集、分析、检测和判断,从而挑选出合格的开关;最后,设计了触屏人机交互界面,可实时显示产品检测的参数。该检测设备在某自动化生产线上经过近一年时间的检测验证,证明系统运行平稳,检测效果良好、误检率低,可以完全取代传统的人工检测方式,提高了开关的检测效率,降低了检测人员的工作量。     

Coherent beam combination of adaptive fiber laser array with tilt-tip and phase-locking control

We present an experimental study on tilt-tip(TT) and phase-locking(PL) control in a coherent beam combination(CBC) system of adaptive fiber laser array.The TT control is performed using the adaptive fiber-optics collimator(AFOC),and the PL control is realized by the phase modulator(PM).Cascaded and simultaneous controls of TT and PL using stochastic parallel gradient descent(SPGD) algorithm are investigated in this paper.Two-fiber-laser-,four-fiber-laser-,and six-fiber-laser-arrays are employed to study the TT and PL control.In the cascaded control system,only one high-speed CMOS camera is used to collect beam data and a computer is used as the controller.In a simultaneous control system one high-speed CMOS camera and one photonic detector(PD) are employed,and a computer and a control circuit based on field programmable gate array(FPGA) are used as the controllers.Experimental results reveal that both cascaded and simultaneous controls of TT using AFOC and PL using PM in fiber laser array are feasible and effective.Cascaded control is more effective in static control situation and simultaneous control can be applied to the dynamic control system directly.The control signals of simultaneous PL and TT disturb each other obviously and TT and PL control may compete with each other,so the control effect is limited.     

Local trimer orbital ordering in LiNiO2 studied by quantitative convergent beam electron diffraction technique

A local trimer orbital ordering model of LiNiO₂ was studied by means of theoretical calculation and experimental measurement of electron structure factors. Based on the trimer model, the electron structure factors were calculated by using the scattering factor of non-spherical Ni³⁺ ion. From these results, it is found that the effect of local orbital ordering on the electron structure factors of several subtle reflections, such as (202) and (107), is very large. The electron structure factors of these subtle reflections were measured by quantitative convergent beam electron diffraction method. The experimentally measured electron structure factor values of these reflections indicate that the trimer orbital ordering model is more close to the true structure of LiNiO₂.     

Synchronization and coherent combining of two pulsed fiber lasers

We demonstrate a scalable architecture for coherent combining of pulsed fiber lasers.A new method for generating synchronous pulsed fiber lasers by direct phase modulation is proposed and investigated.It is shown that phase modulated mutually coupled laser array can be a steady synchronous pulsed fiber laser source.The synchronous pulsed fiber lasers are coherently combined with an invariable phase difference of π in adjacent lasers.Neither active phase control nor polarization control is taken in our experiment.