Evaluation of an Element-Tagged Duplex Immunoassay Coupled with Inductively Coupled Plasma Mass Spectrometry Detection: A Further Study for the Application of the New Assay in Clinical Laboratory

Background: Element-tagged immunoassay coupled with inductively coupled plasma mass spectrometry (ICP-MS) detection has the potential to revolutionize immunoassay analysis for multiplex detection. However, a further study referring to the standard evaluation and clinical sample verification is needed to ensure its reliability for simultaneous analysis in clinical laboratories. Methods: Carcinoembryonic antigen (CEA) and α-fetoprotein (AFP) were chosen for the duplex immunoassay. The performance of the assay was evaluated according to guidelines from the Clinical and Laboratory Standards Institute (CLSI). Moreover, reference intervals (RIs) of CEA and AFP were established. At last, 329 clinical samples were analyzed by the proposed method and results were compared with those obtained with electrochemiluminescent immunoassay (ECLIA) method. Results: The measurement range of the assay was 2–940 ng/mL for CEA and 1.5–1000 ng/mL for AFP, with a detection limit of 0.94 ng/mL and 0.34 ng/mL, respectively. The inter-assay and intra-assay imprecision were all less than 6.58% and 10.62%, respectively. The RI of CEA and AFP was 0–3.84 ng/mL and 0–9.94 ng/mL, respectively. Regarding to clinical sample detection, no significant difference was observed between the proposed duplex assay and the ECLIA method. Conclusions: The ICP-MS-based duplex immunoassay was successfully developed and the analytical performance fully proved clinical applicability. Well, this could be different with other analytes.     

壳聚糖负载贵金属催化剂的研究进展

壳聚糖负载的贵金属催化剂显示了高催化活性和高选择性,已被用于氧化反应、氢化反应、烯丙基取代反应、羰基化反应、Suzuki和Heck偶联反应、烯烃的不对称二羟基化反应及有机醛、酮的合成反应体系中。本文对其制备方法、可能结构及其在各种反应体系中的催化性能进行了综述。     

壳聚糖亚胺环钯化合物的合成与表征

用水杨醛接枝改性后的壳聚糖亚胺与Li₂PdCl₄甲醇溶液反应得到壳聚糖环钯化合物。壳聚糖、壳聚糖席夫碱及其钯化合物用红外光谱(IR)、X射线衍射光谱(XRD)、热分析(DTA-TG)、荧光光谱以及X射线光电子能谱(XPS)等分析手段进行了表征分析。根据表征结果提出了席夫碱及壳聚糖亚胺环钯化合物的结构。     

基于α-羟烷基苯酮(HAPK)可聚合大分子光引发剂的合成及其引发三丙二醇双丙烯酸酯(TPGDA)光聚合动力学的研究

以α-羟烷基苯酮(HAPK)、甲苯-2,4-二异氰酸酯(TDI)、聚乙二醇600(PEG600)和丙烯酸-β-羟乙酯(HEA)为原料,通过3步反应,合成了一种可聚合大分子光引发剂:HAPK-TDI-PEG600-TDI-HEA(HTPTH).用IR对反应过程进行了监测.通过Photo-DSC研究了HTPTH引发三丙二醇双丙烯酸酯(TPG-DA)光聚合动力学,考察了光强、引发剂浓度对TPGDA光聚合动力学的影响.结果表明,随着引发剂浓度和光强的增大,最大反应速率对应的转化率、单体最终转化率、最大反应速率都增大,达到最大反应速率所需的时间减小.     

ZnO/A1lN/Si(111)薄膜的外延生长和性能研究

用常压金属化学气相沉积法(MOCVD)在Si(111)衬底上制备了马赛克结构ZnO单晶薄膜.引入低温AlN缓冲层以阻止衬底氧化、缓解热失配和晶格失配.薄膜双晶X射线衍射2θ/ω联动扫描只出现了Si(111)、ZnO(000l)及AlN(000l)的衍射峰.ZnO/AlN/Si(111)薄膜C方向晶格常量为0.5195 nm,表明在面方向处于张应力状态;其对称(0002)面和斜对称(1012)面的双晶X射线衍ω摇摆曲线半峰全宽分别为460"和1105";干涉显微镜观察其表面有微裂纹,裂纹密度为20 cm-1;3 μm×3μm范围的原子力显微镜均方根粗糙度为1.5 nm激光实时监测曲线表明薄膜为准二维生长,生长速率4.3μm/h.低温10 K光致发光光谱观察到了薄膜的自由激子、束缚激子发射及它们的声子伴线.所有结果表明,采用金属化学气相沉积法并引入AlN为缓冲层能有效提高Si(111)衬底上ZnO薄膜的质量.     

常压化学气相沉积技术生长ZnO:H薄膜的光学性质

采用常压金属有机物化学气相沉积技术(AP-MOCVD),以二乙基锌(DEZn)为Zn源,去离子水(H2O)为氧源,N2作载气,在外延ZnO薄膜的反应气氛中通入少量氢气,在c-Al2O3衬底上生长出了ZnO∶H薄膜。用X射线双晶衍射和光致发光谱对ZnO∶H薄膜的结晶性能和光学性质进行表征。结果表明,ZnO∶H薄膜(002)和(102)面的Ω扫描半峰全宽分别为46.1 mrad和81.4 mrad,表明该薄膜具有良好的结晶性能;室温下,ZnO∶H薄膜具有较强的紫外光发射(380 nm),在低温10 K光致发光谱中观测到位于3.3630 eV处与氢相关的中性施主束缚激子峰(I4)及其位于3.331 eV处的双电子卫星峰(TES)。采用退火的方法,通过观测I4峰的强度变化,研究了氢在ZnO∶H薄膜中的热稳定性。发现随着退火温度的升高,I4峰的强度逐渐减弱,表明在高温下退火,氢会从ZnO薄膜中逸出。     

An Improved Approach for Practical Synthesis of 5-Hydroxymethyl-2′-deoxycytidine (5hmdC) Phosphoramidite and Triphosphate

5-Hydroxymethyl-2′-deoxycytidine (5hmdC) phosphoramidite and triphosphate are important building blocks in 5hmdC-containing DNA synthesis for epigenetic studies. However, efficient and practical methods for the synthesis of these compounds are still limited. The current research provides an intensively improved synthetic method that enables the preparation of commercially available cyanoethyl-protected 5hmdC phosphoramidite with an overall yield of 39% on 5 g scale. On the basis of facile and efficient accesses to cyanoethyl protected-5hmdU and 5hmdC intermediates, two efficient synthetic routes for 5hmdC triphosphate were also developed.     

三层流体中斜入射波作用下半无限板的水弹性响应

解析地研究了在三层流体中斜入射波浪与半无限弹性板的相互作用引起的波散射和板的水弹性响应. 三层流体在界面处的密度发生阶跃, 各层为一常数. 假设流体不可压缩、无黏、流体运动无旋. 在线性势流理论框架下, 使用本征函数展开法和内积式给出波板相互作用的半解析解. 根据色散关系分析, 得到了表面波模态和界面波模态入射时的临界入射角. 随着物理参数的变化, 临界角将随之发生变化. 临界角决定了当由开阔水域向板覆盖水域传播的表面波或界面波的存在性: (1)板覆盖水域入射界面上, 透射波能否存在; (2)入射界面之上界面中, 板覆盖水域中的透射波以及开阔水域中的反射波能否存在. 当下界面波入射时并且入射角足够大时, 开阔水域中的下界面波模态是整个流体域中唯一存在的模态.      

Molecular Weight Distribution Control for Polymerization Processes Based on the Moment-Generating Function

The molecular weight distribution is an important factor that affects the properties of polymers. A control algorithm based on the moment-generating function was proposed to regulate the molecular weight distribution for polymerization processes in this work. The B-spline model was used to approximate the molecular weight distribution, and the weight state space equation of the system was identified by the subspace state space system identification method based on the paired date of B-spline weights and control inputs. Then, a new performance criterion mainly consisting of the moment-generating function was constructed to obtain the optimal control input. The effectiveness of the proposed control method was tested in a styrene polymerization process. The molecular weight distribution of the styrene polymers can be approximated by the B-spline model effectively, and it can also be regulated towards the desired one under the proposed control method.