X波段脉冲电子顺磁共振谱仪的矩形腔与微型平面腔的设计

为了满足脉冲式电子顺磁共振谱仪的需要,设计并制作了连续波谐振腔和脉冲谐振腔. 连续波谐振腔采用矩形谐振腔的设计,而脉冲谐振腔采用了微型平面腔的设计. 在设计阶段,使用Ansoft-HFSS三维电磁仿真软件对2种谐振腔进行模拟计算. 微型平面腔的加工采用了微纳加工技术. 制作完成的谐振腔的参数指标由网络分析仪测定. 实验测得2种谐振腔的参数指标符合理论模拟值,并满足脉冲式电子顺磁共振谱仪的要求.     

基于像散与理想光源成像原理的高亮度半导体激光器光纤耦合设计方法

运用像散原理和理想光源成像原理,讨论了半导体激光器消像散设计.提出了一种基于消像散的高亮度半导体激光器光纤耦合系统的设计方法.以波长为808 nm,输出功率为10 W的半导体激光器的光纤耦合为例,给出了详细的计算方法和设计步骤.结果表明:采用该方法将半导体激光器光束耦合入数值孔径为0.22,芯径为50 μm的光纤中,耦...     

小孔等离子体运动实验方法

在间接驱动惯性约束聚变的黑腔中,辐射烧蚀的高Z等离子体的流体力学运动过程对激光注入黑腔的效率、辐射场均匀性和通过诊断口的黑腔辐射温度诊断都有显著影响。为研究诊断口在黑腔辐射场中的等离子体缩口过程,用激光产生X光辐射加热低Z泡沫填充的金黑腔诊断口,以激光辐照钛平面靶产生的2～5 keV高能段窄能区X光作为背光源,用X光分幅相机获得了源靶和小孔靶两种靶型的小孔等离子体运动过程图像,研究了X光烧蚀的小孔等离子体的流体力学运动过程,探索了定量测量小孔等离子体面密度的空间分布与时间演化过程的实验诊断方法,初步给出小孔等离子体的面密度。     

Charge/discharge characteristics of sulfur composite electrode at different temperature and current density in rechargeable lithium batteries

The charge/discharge characteristics of the sulfur composite cathodes were investigated at different temperatures and different current densities. The composite presented the discharge capacities of 854 and 632 mAh g⁻¹ at 60 and −20 °C, respectively, while it had the discharge capacities of 792 mAh g⁻¹ at 25 °C. The composite presented the discharge capacities of 792 and 604 mAh g⁻¹ at 55.6 and 667 mA g⁻¹, respectively, at room temperature. The results showed that the sulfur composite cathodes presented good charge/discharge characteristics between 60 and −20 °C and at a high c-rate up to 667 mA g⁻¹.     

常压化学气相沉积技术生长ZnO:H薄膜的光学性质

采用常压金属有机物化学气相沉积技术(AP-MOCVD),以二乙基锌(DEZn)为Zn源,去离子水(H2O)为氧源,N2作载气,在外延ZnO薄膜的反应气氛中通入少量氢气,在c-Al2O3衬底上生长出了ZnO∶H薄膜。用X射线双晶衍射和光致发光谱对ZnO∶H薄膜的结晶性能和光学性质进行表征。结果表明,ZnO∶H薄膜(002)和(102)面的Ω扫描半峰全宽分别为46.1 mrad和81.4 mrad,表明该薄膜具有良好的结晶性能;室温下,ZnO∶H薄膜具有较强的紫外光发射(380 nm),在低温10 K光致发光谱中观测到位于3.3630 eV处与氢相关的中性施主束缚激子峰(I4)及其位于3.331 eV处的双电子卫星峰(TES)。采用退火的方法,通过观测I4峰的强度变化,研究了氢在ZnO∶H薄膜中的热稳定性。发现随着退火温度的升高,I4峰的强度逐渐减弱,表明在高温下退火,氢会从ZnO薄膜中逸出。     

高功率梯度掺杂增益光纤温度特性理论研究

在高功率光纤激光器中, 增益光纤的热效应是限制激光功率进一步提高的重要因素之一. 为了降低增益光纤的最高温度, 提出了一种通过改变增益光纤的掺杂浓度分布, 分散光纤激光的热效应, 从而提高激光输出功率的方法. 基于速率方程模型和热传导模型, 在光纤激光放大器输出功率大致相当的情况下, 对几种不同掺杂方式下增益光纤中的热分布和放大器的输出功率进行了数值模拟. 研究结果表明: 增益光纤的梯度掺杂可以优化光纤中的温度分布并提高光纤熔接点的稳定性; 同时兼具提高输出光束的光束质量、抑制光纤中非线性效应和模式不稳定的效果, 是提高光纤激光放大器输出功率切实可行的办法. 研究结果可以为高功率光纤激光器中增益光纤的设计提供一定的参考.     

Stabilization of spiral wave and turbulence in the excitable media using parameter perturbation scheme

This paper proposes a scheme of parameter perturbation to suppress the stable rotating spiral wave, meandering spiral wave and turbulence in the excitable media, which is described by the modified Fitzhug-Nagumo （MFHN） model. The controllable parameter in the MFHN model is perturbed with a weak pulse and the pulse period is decided by the rotating period of the spiral wave approximatively. It is confirmed that the spiral wave and spiral turbulence can be suppressed greatly. Drift and instability of spiral wave can be observed in the numerical simulation tests before the whole media become homogeneous finally.     

瞄准精度对中子半影成像的影响

在Monte Carlo方法模拟中子半影成像的基础上,对视场内点的空间线性不变性进行了研究.在视场范围内,离轴点产生了与离轴距离成正比的展宽现象,但点的积分强度保持了很好一致性,证明系统满足线性不变性假设.利用这一结果,分析了瞄准精度对成像系统的影响.结果表明：靶心在物面上的径向偏差应控制在50μm之内;物距误差控制应在300μm以内;编码孔旋转弧度须小于0.1mrad. 关键词： 空间线性不变性 瞄准精度 展宽效应 图像畸变     

The impact of carbon shell on a Sn–C composite anode for lithium-ion batteries

Spherical Sn–carbon core-shell powders (CSCM/Sn) were synthesized through a resorcinol–formaldehyde microemulsion polymerization performed in the presence of SnO₂ powders, followed by carbonization in an inert atmosphere. Scanning electron microscope and X-ray diffractometry analyses showed that the Sn powders were thoroughly encapsulated within the carbon microspheres. The CSCM/Sn presented much better cyclability than the conventional Sn–carbon microsphere composite. In core-shell-structured composite, most of the Sn particles were encased inside carbon microspheres and not easy to aggregate or fall off from the microspheres. The carbon shell suppressed the aggregation of tin particles and alleviated the volume change of tin, and the conductive carbon shell effectively decreased the polarization during cycling, giving rise to better high rate performance and excellent capacity retention ability. It is shown that surface structure plays an important role in alloy/C composite anode materials for lithium-ion battery.