Electronic absorption spectra of C3Cl, C4Cl, and their ions in neon matrices

Electronic absorption spectra of C3Cl, C3Cl+, C3Cl-, C4Cl, and C4Cl+ have been recorded in 6 K neon matrices following mass selection. Ab initio calculations were performed (CCSD(T) and CASSCF) to identify the ground and accessible excited states of each molecule. The estimated excitation energies and transition moments aid the assignment. The absorptions observed for C3Cl are the 5(2)A' <-- X(2)A' and 3(2)A' <-- X(2)A' transitions of the bent isomer and the (2)A1 <-- X(2)B2 transition of the cyclic form in the UV (336.1 nm), visible (428.7 nm), and near-IR (1047 nm) regions, respectively. The band systems for bent C3Cl- (435.2 nm) and linear C3Cl+ (413.2 nm) are both in the visible region and correspond to 2(1)A' <-- X(1)A' and (1)pi <-- X(1)sigma+ type transitions. The C4Cl and C4Cl+ chains are linear, and the band origins of the 2(2)pi <-- X(2)pi and 2(3)pi <-- X(3)pi electronic transitions are at 427.0 and 405.7 nm. The spectral assignments are supported by analysis of the vibrational structure associated with each electronic transition.     

Ionic liquids in the synthesis and modification of polymers

Ionic liquids are organic salts that are liquid at ambient temperatures, preferably at room temperature. They are nonvolatile, thermally and chemically stable, highly polar liquids that dissolve many organic, inorganic, and metallo‐organic compounds. Many combinations of organic cations with different counterions are already known, and the properties of ionic liquids may be adjusted by the proper selection of the cation and counterion. In the last decade, there has been increasing interest in using ionic liquids as solvents for chemical reactions. The interest is stimulated not only by their nonvolatility (green solvents) but also by their special properties, which often affect the course of a reaction. In recent years, ionic liquids have also attracted the attention of polymer chemists. Although the research on using ionic liquids in polymer systems is still in its infancy, several interesting possibilities have already emerged. Ionic liquids are used as solvents for polymerization processes, and in several systems they indeed show some advantages. In radical polymerization, the k_p/k_t ratio (where k_p is the rate constant of propagation and k_t is the rate constant of termination) is higher than in organic media, and thus better control of the process can be achieved. Ionic liquids, as electrolytes, have also attracted the attention of researchers in the fields of electrochemical polymerization and the synthesis of conducting polymers. Finally, the blending of ionic liquids with polymers may lead to the development of new materials (ionic liquids may act as plasticizers, electrolytes dispersed in polymer matrices, or even porogens). In this article, the new developments in these fields are briefly discussed. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4675–4683, 2005     

Atom transfer radical polymerization of acrylates in an ionic liquid: Synthesis of block copolymers

Atom transfer radical polymerization (ATRP) of acrylates in ionic liquid, 1‐butyl‐3‐methylimidazolium hexaflurophospate, with the CuBr/CuBr₂/amine catalytic system was investigated. Sequential polymerization was performed by synthesizing AB block copolymers. Polymerization of butyl acrylate (monomer that is only partly soluble in an ionic liquid forming a two‐phase system) proceeded to practically quantitative conversion. If the second monomer (methyl acrylate) is added at this stage, polymerization proceeds, and block copolymer formed is essentially free of homopolymer according to size exclusion chromatographic analysis. The number‐average molecular weight of the copolymer is slightly higher than calculated, but the molecular weight distribution is low (M_w/M_n = 1.12). If, however, methyl acrylate (monomer that is soluble in an ionic liquid) is polymerized at the first stage, then butyl acrylate in the second‐stage situation is different. Block copolymer free of homopolymer of the first block (with M_w/M_n = 1.13) may be obtained only if the conversion of methyl acrylate at the stage when second monomer is added is not higher than 70%. Matrix‐assisted laser desorption/ionization time‐of‐flight analysis confirmed that irreversible deactivation of growing macromolecules is significant for methyl acrylate polymerization at a monomer conversion above 70%, whereas it is still not significant for butyl acrylate even at practically quantitative conversion. These results show that ATRP of butyl acrylate in ionic liquid followed by addition of a second acrylate monomer allows the clean synthesis of block copolymers by one‐pot sequential polymerization even if the first stage is carried out to complete conversion of butyl acrylate. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2799–2809, 2002     

Force‐Induced Reversal of β‐Eliminations: Stressed Disulfide Bonds in Alkaline Solution

Understanding the impact of tensile forces on disulfide bond cleavage is not only crucial to the breaking of cross‐linkers in vulcanized materials such as strained rubber, but also to the regulation of protein activity by disulfide switches. By using ab initio simulations in the condensed phase, we investigated the response of disulfide cleavage by β‐elimination to mechanical stress. We reveal that the rate‐determining first step of the thermal reaction, which is the abstraction of the β‐proton, is insensitive to external forces. However, forces larger than about 1 nN were found to reshape the free‐energy landscape of the reaction so dramatically that a second channel is created, where the order of the reaction steps is reversed, turning β‐deprotonation into a barrier‐free follow‐up process to C?S cleavage. This transforms a slow and force‐independent process with second‐order kinetics into a unimolecular reaction that is greatly accelerated by mechanical forces.     

The influence of matrix concentration and solvent composition on the results of MALDI MSI,with the aid of wet-interface matrix deposition

Imaging mass spectrometry is a powerful technique for the molecular analysis of tissue sections. As in many analytical methods, sample preparation is one of the main and most important steps to obtain results of good quality. Usually, the matrix concentration and solvent composition in different studies are taken for granted without any further consideration. In our studies, we aimed to find how matrix concentration and a type of solvent influence the signal. Moreover, we also aimed to find the relationship between these parameters, how they influence the spectra, and how they influence obtained ion maps. In our experiments, we used SunCollect®, which is a commercially available wet-interface system for matrix deposition. We decided to choose two matrix concentrations (2,5-dihydroxybenzoic acid [DHB]: 15 and 25 mg/mL; 9-aminoacridine [9AA]: 7 and 5 mg/mL) and two different water solutions of solvents in two different percentages for the matrices (DHB: 50% and 70% of methanol [MeOH] and acetonitrile [ACN]; 9AA 70% and 50% of ethanol [EtOH] and MeOH). In the end, the influence of these parameters on obtained spectra and ion maps was assessed.     

Atom movement on a dislocated surface

The standard picture of growth at a screw dislocation assumes that the movement of adatoms on a dislocation loop is the same as on an ideal plane. We have examined this proposition by investigating the movement of a single tungsten adatom on a W(110) plane intersected by a screw dislocation. Surprisingly enough, adatom movement was entirely different than on a normal (110) plane: the overall diffusivity was higher, and the mobility varied with the location of the adatom relative to the dislocation core. This study demonstrates that surface transport is strongly affected in the vicinity of dislocations.     

Recent Advancements in and the Future of Organic Emitters: TADF‐ and RTP‐Active Multifunctional Organic Materials

Organic emitting compounds that are based on π‐conjugated skeletons have emerged as promising next‐generation materials for application in optoelectronic devices. In this Minireview, recent advances in the development of organic emitters that irradiate room‐temperature phosphorescence and/or thermally activated delayed fluorescence with extraordinary luminescence properties, such as aggregation‐induced emission, mechanochromic luminescence, and circularly polarized luminescence, are discussed.     

Direct four-photon excitation of amplified spontaneous emission in a nonlinear organic chromophore

We report four-photon pumped amplified spontaneous emission in an organic chromophore. The phenomenon is observed when intense infrared laser radiation illuminates a nonlinear chromophore solution. As a result of this illumination, a strong and highly directional radiation in the visible wavelength range is generated in both the forward and the backward directions, with an angular divergence similar to that of the pump beam.     

Cationic polymerization of styrene involving ionization of the C?Cl bond in ionic liquid/SO2 mixture

There has been a recent upsurge in interest in use of ionic liquids as reaction media for various chemical processes. Until recently, ionic liquids were considered as highly polar solvents. Our earlier investigation indicated that cationic polymerization of styrene initiated by aryl (alkyl) chlorides in ionic liquids may proceed even in the absence of coinitiator (Lewis acid). Polymerization, however, did not conform to controlled polymerization scheme. More recently, it has been claimed that ionic liquids are not as polar as it was previously assumed. Independently, high solubility of sulfur dioxide in ionic liquids was noticed. As sulfur dioxide displays a high ionizing power toward organic halides, we applied ionic liquid/sulfur dioxide mixture as a solvent in cationic polymerization of styrene initiated by aryl (alkyl) chlorides. Results show that in this reaction medium ionization of the C? Cl bond is facilitated, and the contribution of chain transfer reaction can be reduced as compared with polymerization in ionic liquid alone. Ionization of the C? Cl bond, however, is still not sufficiently fast to ensure conditions of controlled polymerization. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5251–5257, 2009     

Synthesis of high molar mass poly(alkylene phosphate)s by polyaddition of diepoxides to difunctional phosphoric acids: Unusual elimination of the side reactions

The reaction between diepoxides and difunctional acids of phosphorus was studied as a potential route to linear polyesters of phosphoric acid. The reaction between diepoxide and P? OH groups in H₃PO₄ and related acids leads to linear phosphates, but cyclic phosphates are also formed as side products. The formation of such unreactive groups terminates polyaddition. However, cyclization is practically eliminated when the epoxide ring is fused to another ring, such as in cyclohexene oxide. A commercially available diepoxide containing two cyclohexene oxide moieties, 3,4‐epoxycyclohexylmethyl‐3,4‐epoxycyclohexanecarboxylate (ERL), was, therefore, used for polyaddition studies. Indeed, in the polyaddition of ERL with ethylphosphoric acid, high molecular weight (number‐average molecular weight up to 10⁴) linear polyphosphates were obtained. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3024–3033, 2001