Molecular structure of (3,5-diallylisocyanuratomethyl)bis(chloromethyl)phosphine oxide. Synthesis of (3,5-diallylisocyanuratomethyl)phosphine sulfides

X-Ray study of the (3,5-diallylisocyanuratomethyl)bis(chloromethyl)phosphine oxide showed that the phosphorylmethyl group is bonded to the nitrogen atom of the cycle. Reaction of the tris(chloromethyl)phosphine sulfide with sodium diallylisocyanurate gave (3,5-diallylisocyanuratomethyl)bis(chloromethyl)phosphine sulfide, and treatment of the tris(3,5-diallylisocyanuratomethyl)phosphine oxide with phosphorus pentasulfide gave a tris(3,5-diallylisocyanuratomethyl)bis(chloromethyl)phosphine sulfide.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1446–1448, August, 1993.     

X-ray, Raman and FTIRS studies of the microstructural evolution of zirconia particles caused by the thermal treatment

Genesis of the structure of zirconia particles prepared by precipitation of amorphous hydrated zirconia by ammonia from the ZrO(NO₃)₂ solution followed by a mild hydrothermal treatment (HTT) of precipitate, washing and calcination under air up to 1000 °C has been studied by X-ray diffraction (XRD), Raman and FTIRS. As revealed by FTIRS of lattice modes, the local structure of amorphous zirconia subjected to HTT is close to that in m-ZrO₂. This helps to obtain nearly single-phase monoclinic nanozirconia (particle size 5-15 nm) already after a mild calcination at 500 °C. Stability of this phase with nanoparticles sizes below the critical value determined by thermodynamic constraints is due to its excessive hydroxylation demonstrated by FTIRS. Dehydroxilation and sintering of these nanoparticles at higher (600-650 °C) temperatures of calcination leads to reappearance of the (111) “cubic” reflection in XRD patterns. Modeling of XRD patterns revealed that this phenomenon could be explained by polysynthetic (001) twinning earlier observed by HRTEM.     

Screen-printed multienzyme arrays for use in amperometric batch and flow systems

Screen-printing technology for electrode fabrication enables construction of amperometric devices suitable for combination of several enzyme electrodes. To develop a biosensor array for characterisation of wastewaters, tyrosinase and horseradish peroxidase (HRP) or cholinesterase-modified electrodes were combined on the same array. The behaviour of the tyrosinase-modified electrode in the presence of hydrogen peroxide (required co-substrate for the HRP-modified electrode) and acetylthiocholine chloride (required co-substrate for cholinesterase) was studied. Performance of bi-enzyme biosensor arrays in the batch mode and in the flow-injection system are discussed.     

Resolution of triacylglycerol positional isomers by reversed-phase high-performance liquid chromatography

The ability of reversed-phase high-performance liquid chromatography (RP-HPLC) to separate some positionally isomeric disaturated and monounsaturated triacylglycerols (TAGs) as intact species is demonstrated for the first time. Mobile phases of acetonitrile modified with methanol, ethanol, 2-propanol, 1-propanol, 1-butanol, acetone, or dichloromethane were tested for the separation of POP-PPO, PLP-PPL, PEP-PPE, and PDP-PPD (P-palmitic, O-oleic, L-linoleic, E-eicosapentaenoic, D-docosahexaenoic acid residue) on a single RP-HPLC column. The resolution improved with increasing number of double bonds in the acyl residues. While POP and PPO were only partially resolved, PDP and PPD were fully separated with all tested mobile phases, except those containing methanol. Also separated were the four TAGs having the same equivalent carbon number (ECN = 42), PEP, PPE, PDP, and PPD, on a single RP-HPLC column with mobile phase acetonitrile-2-propanol (70:30, v/v) at 0.8 mL/min. In all cases the isomer with the unsaturated acyl residue in either 1- or 3-position was retained more strongly than the respective 2-isomer.     

Chiral separation of halogenated amino acids by ligand-exchange capillary electrophoresis

The chiral separation of halogenated amino acids by ligand-exchange CE is described. Halogenated amino acids attracted increasing interest in recent years because of their physiological activities. Different chiral selectors, as there are L-4-hydroxyproline, L-histidine, and N-alkyl derivatives of L-4-hydroxyproline in form of their copper(II) complexes, are compared for their chiral recognition ability for halogenated amino acids. The influence of various parameters, such as selector concentration, pH, organic modifier, and field strength, on the resolution was investigated. All halogenated amino acids investigated were baseline-separated under optimized conditions.     

New Chemicals Suppressing SARS-CoV-2 Replication in Cell Culture

Candidates to being inhibitors of the main protease (Mpro) of SARS-CoV-2 were selected from the database of Voronezh State University using molecular modeling. The database contained approximately 19,000 compounds represented by more than 41,000 ligand conformers. These ligands were docked into Mpro using the SOL docking program. For one thousand ligands with best values of the SOL score, the protein–ligand binding enthalpy was calculated by the PM7 quantum-chemical method with the COSMO solvent model. Using the SOL score and the calculated protein–ligand binding enthalpies, eighteen compounds were selected for the experiments. Several of these inhibitors suppressed the replication of the coronavirus in cell culture, and we used the best three among them in the search for chemical analogs. Selection among analogs using the same procedure followed by experiments led to identification of seven inhibitors of the SARS-CoV-2 replication in cell culture with EC50 values at the micromolar level. The identified inhibitors belong to three chemical classes. The three inhibitors, 4,4-dimethyldithioquinoline derivatives, inhibit SARS-CoV-2 replication in Vero E6 cell culture just as effectively as the best published non-covalent inhibitors, and show low cytotoxicity. These results open up a possibility to develop antiviral drugs against the SARS-CoV-2 coronavirus.     

Can We Merge the Weak and Strong Tetrel Bonds? Electronic Features of Tetrahedral Molecules Interacted with Halide Anions

Using the orbital-free quantum crystallography approach, we have disclosed the quantitative trends in electronic features for bonds of different strengths formed by tetrel (Tt) atoms in stable molecular complexes consisting of electrically neutral tetrahedral molecules and halide anions. We have revealed the role of the electrostatic and exchange-correlation components of the total one-electron static potential that are determined by the equilibrium atomic structure and by kinetic Pauli potential, which reflects the spin-dependent electron motion features of the weak and strong bonds. The gap between the extreme positions in the electrostatic and total static potentials along the line linking the Tt atom and halide anion is wide for weak bonds and narrow for strong ones. It is in very good agreement with the number of minima in the Pauli potential between the bounded atoms. This gap exponentially correlates with the exchange-correlation potential in various series with a fixed nucleophilic fragment. A criterion for categorizing the noncovalent tetrel bonds (TtB) based on the potential features is suggested.     

Study of the Physicochemical and Biological Properties of the Lipid Complex of Marine Microalgae Isolated from the Coastal Areas of the Eastern Water Area of the Baltic Sea

The Baltic Sea algae species composition includes marine euryhaline, freshwater euryhaline, and true brackish water forms. This study aimed to isolate a lipid–pigment complex from microalgae of the Baltic Sea (Kaliningrad region) and investigate its antimicrobial activity against Gram-positive and Gram-negative bacteria. Microalgae were sampled using a box-shaped bottom sampler. Sequencing was used for identification. Spectroscopy and chromatography with mass spectroscopy were used to study the properties of microalgae. Antibiotic activity was determined by the disc diffusion test. Lipids were extracted using the Folch method. Analysis of the results demonstrated the presence of antimicrobial activity of the lipid–pigment complex of microalgae against E. coli (the zone diameter was 17.0 ± 0.47 mm and 17.0 ± 0.21 mm in Chlorella vulgaris and Arthrospira platensis, respectively) and Bacillus pumilus (maximum inhibition diameter 16.0 ± 0.27 mm in C. vulgaris and 16.0 ± 0.22 mm in A. platensis). The cytotoxic and antioxidant activities of the lipid complexes of microalgae C. vulgaris and A. platensis were established and their physicochemical properties and fatty acid composition were studied. The results demonstrated that the lipid–pigment complex under experimental conditions was the most effective against P. pentosaceus among Gram-positive bacteria. Antimicrobial activity is directly related to the concentration of the lipid–pigment complex. The presence of antibacterial activity in microalgae lipid–pigment complexes opens the door to the development of alternative natural preparations for the prevention of microbial contamination of feed. Because of their biological activity, Baltic Sea microalgae can be used as an alternative to banned antibiotics in a variety of fields, including agriculture, medicine, cosmetology, and food preservation.     

Experimental Examination of Solubility and Lipophilicity as Pharmaceutically Relevant Points of Novel Bioactive Hybrid Compounds

The important physicochemical properties of three novel bioactive hybrid compounds with different groups (-CH₃, -F and -Cl) were studied, including kinetic and thermodynamic solubility in pharmaceutically relevant solvents (buffer solutions and 1-octanol) as well as partition coefficient in system 1-octanol/buffer pH 7.4. The aqueous solubility of these chemicals is poor and ranged from 0.67 × 10⁻⁴ to 1.98 × 10⁻³ mol·L⁻¹. The compounds studied are more soluble in the buffer pH 2.0, simulating the gastrointestinal tract environment (by an order of magnitude) than in the buffer pH 7.4 modelling plasma of blood. The solubility in 1-octanol is significantly higher; that is because of the specific interactions of the compounds with the solvent. The prediction solubility behaviour of the hybrid compounds using Hansen’s three-parameter approach showed acceptable results. The experimental solubility of potential drugs was successfully correlated by means of two commonly known equations: modified Apelblat and van’t Hoff. The temperature dependencies of partition coefficients of new hybrids in the model system 1-octanol/buffer pH 7.4 as a surrogate lipophilicity were measured by the shake flask method. It was found that compounds demonstrated a lipophilic nature and have optimal values of partition coefficients for oral absorption. Bioactive assay manifested that prepared compounds showed antifungal activities equal to or greater than fluconazole. In addition, the thermodynamic aspects of dissolution and partition processes have been examined. Bioactive assay manifested that prepared compounds showed antifungal activities equal to or greater than the reference drug.     

Straightforward Approach for Preparing Durable Antibacterial ZnO Nanoparticle Coatings on Flexible Substrates

Flexible antibacterial materials have gained utmost importance in protection from the distribution of bacteria and viruses due to the exceptional variety of applications. Herein, we demonstrate a readily scalable and rapid single-step approach for producing durable ZnO nanoparticle antibacterial coating on flexible polymer substrates at room temperature. Substrates used are polystyrene, poly(ethylene-co-vinyl acetate) copolymer, poly(methyl methacrylate), polypropylene, high density polyethylene and a commercial acrylate type adhesive tape. The deposition was achieved by a spin-coating process using a slurry of ZnO nanoparticles in toluene. A stable modification layer was obtained when toluene was a solvent for the polymer substrates, namely polystyrene and poly(ethylene-co-vinyl acetate). These coatings show high antibacterial efficiency causing >5 log decrease in the viable counts of Gram-negative bacteria Escherichia. coli and Gram-positive bacteria Staphylococcus aureus in 120 min. Even after tapping these coated surfaces 500 times, the antibacterial properties remained unchanged, showing that the coating obtained by the presented method is very robust. In contrast to the above findings, the coatings are unstable when toluene is not a solvent for the substrate.