液相色谱-电喷雾电离三级四极杆质谱法测定茶叶中6种烟碱类农药残留

应用液相色谱-电喷雾电离三级四极杆质谱(LC-ESI-MS/MS)方法测定茶叶中呋虫胺、噻虫嗪、噻虫胺、吡虫啉、啶虫咪和噻虫啉烟碱类农药残留.前处理方法包括添加同位素内标吡虫啉-D4,乙腈提取,再用活性碳和Oasis(HLB)固相小柱净化.该方法采用正离子方式,多反应监测每种烟碱类杀虫剂各两对离子进行定性、定量分析.方法在0.01～0.4 mg/kg范围内具有良好的线性关系.实验了3个添加水平0.02、0.04和0.2 mg/kg,回收率范围为80.1%～106.1%;相对标准偏差小于9.7%;方法检出限(LOQ)均为0.02 mg/kg.本方法简便、快速、准确,各项技术指标满足国内外法规的要求,可用于茶叶样品中烟碱类农药残留的确证检测.     

玩具中苯酚和双酚A的高效液相色谱-荧光检测方法研究

采用高效液相色谱分离,荧光检测器检测,建立了三种不同类型的玩具中苯酚和双酚A的测定方法.用超声提取的方式处理样品,对提取溶剂和提取时间进行选择,确定以甲醇-水(65:35,V/V)作为提取溶液,超声提取20 min.苯酚和双酚A分别在0.012～1.0 mg/L、0.03～2.5 mg/L范围内线性良好,相关系数均达到0.9999,检出限分别为0.6 mg/kg和1.5 mg/kg,不同加标水平的回收率为90.5%～104.3%,其相对标准偏差为0.4%～3.8%.该方法操作简便,灵敏度高、重现性好,能有效提取和测定三类玩具中的苯酚和双酚A.     

A new chiral Rh(II) catalyst for enantioselective [2 + 1]-cycloaddition. mechanistic implications and applications

A novel chiral Rh(II) catalyst (1) is introduced for the [2 + 1]-cycloaddition of ethyl diazoacetate to terminal acetylenes and olefins with high enantioselectivity. The catalyst 1 consists of one acetate bridging group and three mono-N-triflyldiphenylimidazoline-2-one bidentate ligands (DPTI) spanning the Rh(II)-Rh(II) metallic center in a structure that was determined by single-crystal X-ray diffraction analysis. A rational mechanism is advanced that provides a straightforward explanation for the enantioselectivity and absolute stereochemical course of the [2 + 1]-cycloaddition reactions. A key element in this explanation is the cleavage of one of the Rh-O bonds of the bridging acetate group in the intermediate Rh-carbene complex to form a new pentacoordinate Rh carbene complex (formally 1.5 valent Rh) that can undergo [2 + 2]-cycloaddition with the C-C pi-bond of the acetylenic or olefinic substrate. Reductive elimination of the resulting adduct affords the cyclopropene or cyclopropane product. The C2-symmetry of the two DPTI ligands orthogonal to the bridging acetate also contributes to the high observed enantioselectivity and mechanistic clarity. The catalyst 1, which functions effectively at 0.5 mol %, can be recovered efficiently for reuse. Its ready availability, robustness, and effectiveness suggest it as a useful addition to the list of practical chiral Rh(II) catalysts for synthesis.     

Homolysis of the Ln-N (Ln = Yb, Eu) bond. Synthesis, structural characterization and catalytic activity of ytterbium(II) and europium(II) complexes with methoxyethyl functionalized indenyl ligands

The interaction of methoxyethyl functionalized indene compounds (C(9)H(6)-1-R-3-CH(2)CH(2)OMe, R =t-BuNHSiMe(2)(1), Me(3)Si (2), H (3)) with [(Me(3)Si)(2)N](3)Ln(mu-Cl)Li(THF)(3)(Ln=Yb (4), Eu (5)) produced a series of new ytterbium(II) and europium(II) complexes via tandem silylamine elimination/homolysis of the Ln-N (Ln=Yb, Eu) bond. Treatment of the lanthanide(III) amides [(Me(3)Si)(2)N](3)Ln(mu-Cl)Li(THF)(3)(Ln=Yb (4), Eu (5) with 2 equiv. of, 1,2 and 3, respectively, produced, after workup, the ytterbium(II) complexes [eta5:eta1-Me(2)Si(MeOCH(2)CH(2)C(9)H(5))(NHBu-t)](2)Yb(II) (6), (eta5:eta1-MeOCH(2)CH(2)C(9)H(5)SiMe(3))(2)Yb(II) (7), (eta5:eta1-MeOCH(2)CH(2)C(9)H(6))(2)Yb(II)(8) and the corresponding europium(II) complexes [eta5:eta1-Me(2)Si(MeOCH(2)CH(2)C(9)H(5))(NHBu-t)](2)Eu(II)(9), (eta5:eta1-MeOCH(2)CH(2)C(9)H(5)SiMe(3))(2)Eu(II)(10) and (eta5:eta1-MeOCH(2)CH(2)C(9)H(6))(2)Eu(II)(11) in moderate to good yield. In contrast, interaction of the corresponding indene compounds 1, 2 or 3 with the lanthanide amides [(Me(3)Si)(2)N](3)Ln (Ln = Yb, Eu) was not observed, while addition of 0.5 equiv. of anhydrous LiCl to the corresponding reaction mixture produced, after workup, the corresponding ytterbium(II) or europium(II) complexes. All the new compounds were fully characterized by spectroscopic and elemental analyses. The structures of complexes, and were determined by single-crystal X-ray analyses. The catalytic activity of all the ytterbium(II) and europium(II) complexes on MMA polymerization was examined. It was found that all the ytterbium(II) and europium(II) complexes can function as single-component MMA polymerization catalysts. The temperature, solvent and ligand effects on the catalytic activity were studied.     

Water／Oil Biphasic Hydroformylation of Higher Olefins over a TPPTS-Rh／SiO2 Catalyst

A novel TPPTS-Rh/SiO2 catalyst, prepared by directly modifying a heterogeneous high-surface-area Rh/SiO2 catalyst with water-soluble TPPTS ligands, could decrease the resistance of masstransfer in water/oil biphasic media for the hydroformylation of higher olefins. The catalytic performancefor hydroformylation on this biphasic TPPTS-Rh/SiO2 catalyst system was higher than those of thetraditional biphasic HRhCO(TPPTS)3 systems, owing to the chemical bonds between the highly dispersedRh metal particles and the TPPTS ligands. The catalyst system is applicable for hydroformylation ofhigher olefins such as 1-dodecene.     

壳聚糖/明胶/TiO2三元复合膜的制备与功能特性

纳米TiO2用阴离子表面改性剂SDS改性后,以溶液共混法制备了壳聚糖／明胶/TiO2复合膜,用FTIR、XRD、SEM、TEM表征了其结构与形态,并测试了其吸水率、透光率、力学性能和抑菌性能。进而探讨了复合膜中明胶和纳米TiO2含量对壳聚糖膜性能的影响。结果表明：复合膜中,壳聚糖、明胶和TiO2微粒间存在强烈的氢键相互作用,从而使明胶与壳聚糖具有良好的相容性,TiO2与壳聚糖、明胶分子间有很好的界面作用。适量TiO2的加入,可使壳聚糖／明胶共混膜的力学性能得到改善,明胶质量分数为0．30时,掺杂wTiO2为0．01、0．02的复合膜较壳聚糖／明胶共混膜的湿强及干态韧性分别提高了55．9％,40．8％和49．7％,47．9％。此外,复合膜的抑菌性能随明胶的增加而降低,但随TiO2的掺杂比的增加而增强,纳米TiO2的引入拓宽了壳聚糖和明胶两种天然高分子材料的应用范围。     

The absolute sign of J coupling constants determined using the order matrix calculation

A novel methodology using the order matrix calculation to determine the absolute sign of spin-spin couplings based on the structure of organic compounds is presented. The sign of the residual dipolar coupling (RDC) depends on the sign of corresponding scalar spin-spin coupling constant and the sign of the RDC has a dramatic influence on the order matrix calculation. Therefore, the sign of the spin-spin coupling constant can be obtained by an order matrix calculation through the corresponding RDC. Six types of spin-spin coupling constants, including 2J(H,H), 1J(C,F), 2J(C,F), 3J(C,F), 2J(F,H) and 3J(F,H), were obtained simultaneously. Except for 3J(C,F) where the measured RDCs have very small magnitudes, the signs were determined unambiguously.     

Photocatalytically Renewable Micro‐electrochemical Sensor for Real‐Time Monitoring of Cells

Electrode fouling and passivation is a substantial and inevitable limitation in electrochemical biosensing, and it is a great challenge to efficiently remove the contaminant without changing the surface structure and electrochemical performance. Herein, we propose a versatile and efficient strategy based on photocatalytic cleaning to construct renewable electrochemical sensors for cell analysis. This kind of sensor was fabricated by controllable assembly of reduced graphene oxide (RGO) and TiO₂ to form a sandwiching RGO@TiO₂ structure, followed by deposition of Au nanoparticles (NPs) onto the RGO shell. The Au NPs‐RGO composite shell provides high electrochemical performance. Meanwhile, the encapsulated TiO₂ ensures an excellent photocatalytic cleaning property. Application of this renewable microsensor for detection of nitric oxide (NO) release from cells demonstrates the great potential of this strategy in electrode regeneration and biosensing.     

Sandwich‐Structured Graphene–Nickel Silicate–Nickel Ternary Composites as Superior Anode Materials for Lithium‐Ion Batteries

We report the synthesis of sandwich‐structured graphene–nickel silicate–Ni ternary composites by using the solvothermal method followed by a simple in situ reduction procedure. The composites show an interesting structure with graphene sandwiched between two layers of well‐dispersed Ni nanoparticles (NPs) anchored on ultrathin nickel silicate nanosheets. These ternary composites exhibit enhanced performance as anode materials owing to the synergistic effect between the graphene matrix and electrochemically inert Ni nanoparticles, an effect that holds promise for the design and fabrication of other advanced electrode materials.     

Small‐Sized Tungsten Nitride Particles Strongly Anchored on Carbon Nanotubes and their Use as Supports for Pt for Methanol Electro‐oxidation

The anchoring of small‐sized WN (tungsten nitride) nanoparticles (NPs) with good dispersion on carbon nanotubes (CNTs) offers an effective means of obtaining promising materials for use in electrocatalysis. Herein, an effective method based on grinding treatment followed by a nitridation process is proposed to realize this goal. In the synthesis, a solution containing H₄[SiO₄(W₃O₉)₄] (SiW₁₂) and CNTs modified with polyethylenimine (PEI‐CNTs) was ground to dryness. Small‐sized WN NPs were anchored onto the CNTs with good dispersion after calcination under NH₃. Under hydrothermal assembly conditions (absence of grinding), WN particles of larger size and with inferior dispersion were obtained, demonstrating the important role of the grinding process. The benefit of the small‐sized WN has been demonstrated by using WN/CNTs as a support for Pt to catalyze the methanol electro‐oxidation reaction. The mass activity of Pt‐WN/CNTs‐G‐70 (where G denotes the grinding treatment, and 70 is the loading amount (%) of WN in the WN/CNTs) was evaluated as about 817 mA mg^?1_Pt, better that those of commercial Pt/C (340 mA mg^?1_Pt) and Pt/CNTs (162 mA mg^?1_Pt). The Pt‐WN/CNTs‐G also displayed good CO tolerance. In contrast, Pt‐WN/CNTs prepared without the grinding process displayed an activity of 344 mA mg^?1_Pt, verifying the key role of grinding treatment in the preparation of WN/CNTs with good co‐catalytic effect.