Systematics of Mössbauer parameters in Fe57-doped titanate and germanate ilmenites

The Mössbauer spectra of ilmenite (FeTiO₃), Fe²⁺-doped ilmenites, MTiO₃ (M = Cd, Mn, Zn, Co, Mg and Ni) and MGeO₃ (M = Mn, Zn and Mg), have been studied from 4.2 K to room temperature. Systematic variations in the isomer shift and quadrupole splitting at room temperature are correlated with the change in ionic radii of the host M ions and the c/a ratio of the host crystal, respectively. The quadrupole splittings show a remarkable temperature variation; the magnetic ilmenites show either a sudden increase or a sudden decrease of quadrupole splittings below the Néel temperature, depending on the orientation of the spin axis with respect to the c axis.     

Semiconductor diamond heater in the Kawai multianvil apparatus: an innovation to generate the lower mantle geotherm

Semiconductor diamond is considered the best heater material to generate ultra-high temperatures in a Kawai cell. In two pioneering studies, a mixture of graphite and amorphous boron (or boron carbide, B₄C) was converted to semiconductor diamond in the diamond stability field and was confirmed to generate 2000°C and 3500°C, respectively. Following these works, we synthesized a homemade boron-doped graphite block with fine machinability. With this technical breakthrough, we developed a semiconductor diamond heater in a smaller Kawai-type cell assembly. Here, we report the procedure for making machinable boron-doped graphite, and the performance of the material as a heater in a Kawai cell at 15?GPa using tungsten carbide anvils and at ～50?GPa using sintered diamond anvils. Furthermore, we present a finite element simulation of the temperature distribution generated by a semiconductor diamond heater, which is much more homogeneous than that generated by a metal heater.     

Achievement of a 920-MHz high resolution NMR

We have developed a 920-MHz NMR system and performed the proton NMR measurement of H(2)O and ethylbenzene using the superconducting magnet operating at 21.6 T (920 MHz for proton), which is the highest field produced by a superconducting NMR magnet in the persistent mode. From the NMR measurements, it is verified that both homogeneity and stability of the magnet have a specification sufficient for a high resolution NMR.     

Design of polarization retarder suitable for nonlinear optical systems

We present a design technique of retarders suitable for nonlinear optical systems. A thin sample of LiNbO₃ crystal is utilized as a retarder for wide-ranging applications. Analysis shows that the same crystal can be used for single-wave or two-wave retardations, changing the orientation of the crystal only. As an application, the retarder is used to polarize two waves orthogonal, as necessary for difference frequency mixing in an AgGaSe₂ crystal.     

Continuous operation up to 3 kHz in a discharge-pumped XeCl excimer laser

Continuous operations at a high repetition rate up to 3 kHz for discharge-pumped XeCl excimer laser are presented. The dependence of the clearing ratio on laser-gas pressure and input energy densities is studied. It was found that suitable laser-gas pressures minimize the clearing ratio for various input-energy densities. It is also shown that few density disturbances in the discharge region are induced by gas heating in a discharge-pumped XeCl excimer laser with low input-energy density     

From optical spectroscopy to a concentration quenching model and a theoretical approach to laser optimization for Yb3+-doped YLiF4 crystals

A spectroscopic characterization was carried out to identify crystal-field levels for magnetic-dipole transitions of Yb³⁺ ions located in the Y³⁺ dodecahedral S₄ crystallographic site in YLiF₄ (YLF) crystals which were grown either by the Czochralski technique or by the laser heated pedestal growth (LHPG) technique. The concentration dependence of the measured decay time of the ²F_5/2 excited level of Yb³⁺ was analysed in order to understand relevant concentration quenching mechanisms. Under Yb³⁺ ion infrared pumping, self-trapping and up-conversion non-radiative energy transfer to trace rare-earth impurities (Er³⁺, Tm³⁺) has been observed over the visible region and interpreted by a limited-diffusion process within the Yb³⁺ doping ion subsystem to the impurities. The principal parameters useful for a theoretical approach for potential laser applications of Yb³⁺-doped YLiF₄ crystals have also been given.     

Detection of diminished response to cold pressor test in smokers: Assessment using phase-contrast cine magnetic resonance imaging of the coronary sinus

Purpose

The purposes of this study were to evaluate the reproducibility for measuring the cold pressor test (CPT)-induced myocardial blood flow (MBF) alteration using phase-contrast (PC) cine MRI, and to determine if this approach could detect altered MBF response to CPT in smokers.

Materials and methods

After obtaining informed consent, ten healthy male non-smokers (mean age: 28 ± 5 years) and ten age-matched male smokers (smoking duration ≥ 5 years, mean age: 28 ± 3 years) were examined in this institutional review board approved study. Breath-hold PC cine MR images of the coronary sinus were obtained with a 3 T MR imager with 32 channel coils at rest and during a CPT performed after immersing one foot in ice water. MBF was calculated as coronary sinus flow divided by the left ventricular (LV) mass which was given as a total LV myocardial volume measured on cine MRI multiplied by the specific gravity (1.05 g/mL).

Results

In non-smokers, MBF was 0.86 ± 0.25 mL/min/g at rest, with a significant increase to 1.20 ± 0.36 mL/min/g seen during CPT (percentage change of MBF (?MBF (%)); 39.2% ± 14.4%, p < 0.001). Inter-study reproducibility for ?MBF (%) measurements by different MR technologist was good, as indicated by the intraclass correlation coefficient of 0.93 and reproducibility coefficient of 10.5%. There was no significant difference between smokers and non-smokers for resting MBF (0.85 ± 0.32 mL/min/g, p = 0.91). However, ?MBF (%) in smokers was significantly reduced (-4.0 ± 32.2% vs. 39.2 ± 14.4%, p = 0.011).

Conclusion

PC cine MRI can be used to reproducibly quantify MBF response to CPT and to detect impaired flow response in smokers. This MR approach may be useful for monitoring the sequential change of coronary blood flow in various potentially pathologic conditions and for investigating its relationship with cardiovascular risk.     

Measurement on Spot Size Dependence of Dense WDM Dielectric Multilayer Filters

We present the spot size dependence of dielectric multilayer filters for use in dense WDM systems. We found large dependences of filter performances on the spot size and the incident angle of input light, which should be important for miniaturizing multi-channel add/drop filters.     

Low Power Penalty Operation of a Wide Input Dynamic Range Cross-Phase Modulation Wavelength Converter

We successfully demonstrated low power penalty operation of a cross-phase modulated (XPM) wavelength converter using a semiconductor optical amplifier (SOA) power equalizer. We also clarified the SOA equalizing level for more adaptive wavelength conversion and achieved a power penalty of less than 1 dB over the wide input dynamic range of 15 dB.