Persistent spin current in a quantum wire with weak Dresselhaus spin——orbit coupling

The spin current in a parabolically confined semiconductor heterojunction quantum wire with Dresselhaus spin--orbit coupling is theoretically studied by using the perturbation method. The formulae of the elements for linear and angular spin current densities are derived by using the recent definition for spin current based on spin continuity equation. It is found that the spin current in this Dresselhaus spin--orbit coupling quantum wire is antisymmetrical, which is different from that in Rashba model due to the difference in symmetry between these two models. Some numerical examples for the result are also demonstrated and discussed.     

Light induced microstructure transformation in a-Si：H films

A series of a-Si:H films are deposited by hot wire assisted microwave electron cyclotron resonant chemical vapour deposition (HW-MWECR-CVD), subsequently exposed under simulated illumination for three hours. This paper studies the microstructure change during illumination by Fourier Transformation Infrared (FTIR) spectra. There are two typical transformation tendencies of microstructure after illumination. It proposes a model of light induced structural change based on the experimental results. It is found that all samples follow the same mechanism during illumination, and intrinsic structure of samples affect the total H content.     

Effects of sintering temperature and atmosphere on magnetism in Mn-doped TiO2 bulk samples

Magnetic properties have been investigated on Mn doped TiO₂(Ti_0.98Mn_0.02O₂) bulk samples prepared by solid state reaction, which were sintered at different temperature ranging from 450 ^°C to 900 ^°C in air and argon atmosphere, respectively. The results show that the magnetic properties were strongly dependent on the sintering temperature and atmosphere. For samples sintered in air, the magnetization initially increase with the increase of sintering temperature up to 600 ^°C and thereafter it decrease. While the magnetization of samples sintered in argon atmosphere decreases monotonically with the increase of sintering temperature. Furthermore, for samples sintered at 600 ^°C in air, the magnetic susceptibility exhibits a dominant Curie-Weiss behaviour and no magnetic transition is observed over the temperature range from 10 to 300 K. In contrast, for samples sintered in argon atmosphere, besides the magnetic transition near 45 K perhaps caused by Mn₃O₄, another magnetic transition appears near room temperature.     

“现代谱分析图形软件系统”的一些应用

“现代谱分析图形软件系统”是一个以谱分析为主体的大型软件，它包括了３２种当前典型的现代谱分析方法、经典谱分析方法和其它常用信号分析方法，并具有丰富的图形处理功能。本文介绍了该软件系统的基本功能和主要特点，研究了它在现代谱分析、水声、医疗、语音分析等领域的应用，并分析了有关结果。     

寄生传输线对PFN-Marx输出波形的影响

紧凑型PFN-Marx脉冲发生器中,级与级之间存在着较大的寄生电容,该电容和PFN节电感构成了寄生传输线。对两种排布方式下的寄生传输线的放电过程进行了简单分析,重点开展了双列排布方式下全电路仿真模拟,对负载类型、寄生电容、负载电感等参数对输出波形的影响进行了计算,得到了二极管负载会在波形前沿上造成下降、寄生电容大小决定振荡频率、负载电感放大振荡幅值等结论。开展的PFN-Marx实验研究也进一步验证了上述分析结果。根据分析,提出了一种有效抑制输出波形振荡的方法,从电路上进行了仿真验证,进一步实验证实了该方法的有效性。     

可接入射频半实物的试验数据转换系统设计与实现

试验环节是产品研制生命周期中的重要环节,但是一直以来都缺乏有效的管理手段,在整个测试阶段都存在大量的人为的、重复性的工作,导致试验效率低下,为改善这一现状,提高试验效率,提出了一种基于PXIe数据采集系统,借助LabVIEW和DIAdem软件的测试系统解决方案：以LabVIEW控制数据高速同步采集,DIAdem调用LabVIEW模块执行算法分析,通过软件集成,实现对测试系统的全面管理,包括数据采集、数据检索、数据分析、报表生成及整个流程的自动化控制。本文以C919飞机电源测试系统为介绍对象,对该套测试系统解决方案进行阐述,实际测试情况表明,在数据吞吐率大于200M/S的情况下,相对传统测试方法,该测试方案在保证测试精度的基础上,极大的提高了试验效率,极大的提高了系统的可扩展性和可维护性。     

增量PID算法在某风洞压力控制中的应用改进

本文介绍了风洞高度模拟控制系统的构成和控制原理,根据控制特点选取了增量PID控制算法控制补气调节阀开度,针对直接采用增量PID控制算法对风洞总压控制效果不太理想的问题,分析了影响控制效果的原因,提出了采用超前调节的解决措施,并进行了系统调试。调试结果表明：总压控制精度和稳定过渡时间都有明显改善,为风洞总压控制的改进提供了方法。也为类似大惯性、大滞后特性系统的精确、稳定控制提供了参考。     

基于RBR和PCA的2.4米风洞故障诊断系统应用研究

为解决2.4米风洞试验装备的故障监测与诊断（FDD）问题,设计了一种基于规则推理（RBR）和主元分析（PCA）的并行故障诊断系统。对试验流程和因果关系较强的单一装备故障,采用RBR诊断方法;而对控制过程和重要传感器的故障,通过构建PCA模型,根据平方预报误差（SPE）实现系统故障的诊断。运行效果表明：该系统实时性好、诊断结果与实际相符合、且对过程故障具有较强的针对性。