TiO2 sol-gel derived amperometric biosensor for H2O2 on the electropolymerized phenazine methosulfate modified electrode

A novel hydrogen peroxide biosensor was developed based on the immobilization of horseradish peroxidase (HRP) in a TiO(2) sol-gel matrix on an electropolymerized phenazine methosulfate (PMS) modified electrode surface. Such membranes are of interest due to their high surface area, biological compatibility, and ease of fabrication. HRP entrapped in the TiO(2) matix was stable and retained its activity to a large extent. Cyclic voltammetry and amperometric measurements were employed to demonstrate the feasibility of electron transfer between immobilized HRP and the glassy carbon electrode via electropolymerized PMS. The influence of various experimental parameters such as operating potential, pH, temperature, and stability was investigated for optimum analytical performance. The biosensor provided a wide linear calibration range from 4.0x10(-6) M to 1.0x10(-3) M, with a detection limit of 8.0x10(-7) M at a signal-to-noise ratio of 3. The sensor retained 80% of its original activity after two months of operation.     

Chemical Reactions and Kinetics of the Carbon Monoxide Coupling in the Presence of

The chemical reactions and kinetics of the catalytic coupling reaction of carbon monoxide to diethyl oxalate were studied in the presence of hydrogen over a supported palladium catalyst in the gaseous phase at the typical coupling reaction conditions. The experiments were performed in a continuous flow fixed-bed reactor. The results indicated that hydrogen only reacts with ethyl nitrite to form ethanol, and kinetic studies revealed that the rate-determining step is the surface reaction of adsorbed hydrogen and the ethoxy radical (EtO-). A kinetic model is proposed and a comparison of the observed and calculated conversions showed that the rate expressions are of rather high confidence.     

Das dielektrische Verhalten von Polyäthern zwischen Mikrowellen- und Infrarot-Gebiet

Zusammenfassung Es wurde die Absorption und Dispersion verschiedener Polyäther im Mikrowellengebiet und im fernen IR untersucht. Mit wachsender Sauerstoffzahl in der Kette werden die Torsions- und Biegeschwingungen wachsend IR-aktiv. Ihre Frequenzlagen ändern sich mit dem zunehmend polaren Charakter der Struktur. Die Analogie zwischen der Verschiebung der Schwingungsfrequenzen und dem Verlauf der Schmelztemperaturen wird diskutiert.Mit zunehmend polarem Charakter steigen der Temperaturkoeffizient der Molpolarisation und die Differenz (–n ²) der Dielektrizitätskonstanten im Mikrowellengebiet und im optischen Bereich stark an. Ein Vergleich mit der Höhe der Dispersionsstufen im fernen IR und deren Temperaturabhängigkeit ergab, daß diese zusätzliche Polarisation nicht allein durch die IR-aktiven Banden bedingt ist. Sie muß gekoppelt sein mit dem ebenfalls stark anwachsenden Untergrundverlust im gesamten mm- und sub-mm-Gebiet.

---

Summary Absorption and dispersion of several polyethers were measured in the microwave region and in the far infrared. The torsional vibrations become increasingly iractive with increasing number of oxygens in the chain. Their frequencies shift, too, in a manner analogues to the variation of the melting temperatures.The temperature coefficient of the mol polarization at 32 GHz and the difference (–n ²) between microwave and optical dielectric constant rise rapidly with increasing polar character of the structure. It was tried to correlate (–n ²) with the overall absorption of the skeletal vibrations. Height and temperature dependence of the far ir dispersion show, however, that the larger part of this additional polarization cannot be accounted for by the resonance absorption bands. It must be correlated with the background loss which extends over the whole mm and sub-mm range and also increases rapidly with increasingly polar structure.

---

---

Mit 10 Abbildungen in 14 Einzeldarstellungen und 2 Tabellen     

Formation and Crystal Structure of [(F5TeOXe)+·SO2ClF][Sb(OTeF5)6-]

Xe(OTeF₅)₂ reacts with Sb(OTeF₅)₃ under the formation of [Xe₂(OTeF₅)₃]⁺[Sb(OTeF₅)₆]^-. From SO₂ClF solution a yellow solvate [F₅TeOXe]⁺·SO₂ClF· [Sb(OTeF₅)₆]^- is formed with the crystal data: a = 1028.1(1), b = 1040.9(1), c = 1780.2(3) pm, α = 98.07(1), β = 97.68(1), γ = 105.82(1)°, space group . The O-Xe···O fragment is essentially linear (176.1(2)°), and the two Xe-O distances are quite different 197.1(4) and 242.6(4) pm.     

Synthesis of new 1,3-bis（phenylethynyl）disilazanes

Three new 1,3-bis(phenylethynyl)disilazanes were synthesized from the reaction of 1,3-dichlorodisilazanes with (phenylethy- nyl)lithium,and characterized by infrared (IR) spectra,nuclear magnetic resonance (NMR) and mass spectrometry (MS).     

吸附式增湿饱和器

本文介绍了美国GE公司DPG—300分流湿度发生器的工作原理。针对该发生器的增湿饱和度不够的缺陷,提出了改进措施。改进的方法是通过在增湿饱和器内放置能够吸附水的吸附材料而实现的。     

Probing the kinetic landscape of transient peptide-protein interactions by use of peptide (15)n NMR relaxation dispersion spectroscopy: binding of an antithrombin peptide to human prothrombin

Protein-ligand interactions may lead to the formation of multiple molecular complexes in dynamic exchange, affecting the kinetic and thermodynamic characteristics of the binding equilibrium. We followed the dissociation kinetics of the transient and specific complex of an antithrombotic peptide N-acetyl-Asp(55)-Phe-Glu-Glu-Ile-Pro(60)-Glu-Glu-Tyr-Leu-Gln(65) with human prothrombin by use of (15)N NMR relaxation dispersion spectroscopy of the peptide. Every one of the five (15)N-labeled adjacent residues of the peptide exhibited apparently different kinetic exchange and relaxation behaviors, which were especially evident at different concentrations of prothrombin. Binding-induced (15)N relaxation dispersion of residues Phe(56), Glu(57), Glu(58), and Ile(59) can be fitted phenomenologically to a two-site on-and-off exchange mechanism with physically feasible relaxation and kinetic parameters obtained for residues Phe(56), Glu(58), and Ile(59), independent of the prothrombin concentration. The apparent kinetic parameters of Glu(57) show some dependence on the concentration of prothrombin and the extracted transverse relaxation rate for Glu(57) in the bound state was severalfold higher than that expected for a protein-peptide complex with a size of approximately 72 kDa. In addition, the equilibrium population of the bound peptide obtained for Glu(57) was inconsistent with those for Phe(56), Glu(58), and Ile(59) and with the prothrombin/peptide ratios used in the experiments. These discrepancies can be explained by the presence of two conformations for the peptide-protein complex exchanging at a rate of approximately 100 s(-)(1). In all, our study shows that fast dissociation of protein-peptide complexes can be studied quantitatively using peptide (15)N NMR relaxation dispersion measurements without a precise knowledge of the peptide and protein concentrations. In addition, protein titration was found to improve the accuracy of quantitative analysis and may make it possible to determine the rate of conformational changes within the protein-peptide complex.     

Time dependence of viscosity of dilute polyisobutylene solutions

Summary Shearing at constant gradient of polyisobutylene (PIB) solutions in viscous polybutene oils results in time dependent changes of their viscosities. Two PIB fractions (M=8·10⁶ and 3.8·10⁶) have been studied in a variety of solvents, covering the viscosity range from 5 to 0.5·10⁻² poise. The overall phenomenon is similar to that already observed for polymethylmethacrylate, polystyrene, and polyethylene oxide solutions in Aroclor. Results have been discussed in terms of polymer molecular weight and concentration, solvent viscosity and gradient. The systems investigated are free from strong polar interactions and tendency toward molecular aggregation; time dependent changes of viscosity are therefore observable also for true molecularly dispersed solutions.

---

Zusammenfassung Scherung mit konstantem Geschwindigkeitsgradienten von Polyisobutylen (PIB)-L?sungen in viskosen Polybuten-?len ergibt zeitabh?ngige ?nderungen ihrer Viskosit?ten. Zwei PIB-Fraktionen (M=8·10⁶ und 3,8·10⁶) wurden in einer Vielzahl von L?sungsmitteln untersucht, die den Viskosit?tsbereich von 5 bis 0,5·10⁻² Poise überdeckten. Das ph?nomenologische Erscheinungsbild ist ?hnlich dem schon beobachteten für Polymethylmethacrylat, Polystyrol und Poly?thylenoxid-L?sungen in Aroclor. Die Ergebnisse wurden hinsichtlich des Polymer-Molekulargewichts und der Konzentration, der L?sungsmittelviskosit?t und des Gradienten diskutiert. Die untersuchten Systeme sind frei von starken polaren Wechselwirkungen und von Tendenzen in Richtung auf molekulare Aggregation. Zeitabh?ngige ?nderungen der Viskosit?t sind deshalb auch für wahre molekulardisperse L?sungen beobachtbar.