Die Schmelzdiagramme der Systeme CsN3/Zn(N3)2 und KN3/Zn(N3)2

The phase diagrams of the systems CsN₃/Zn(N₃)₂ and KN₃/Zn(N₃)₂ have been obtained employing the microscopic technique ofL. Kofler andA. Kofler. Within the system CsN₃/Zn(N₃)₂ three eutectics at 148°C, 142°C, and 210°C were found. Besides Cs₂Zn(N₃)₄, melting incongruently in the interval 153°C to 170°C, there exist two further compounds of the most probable composition Cs₃Zn₂(N₃)₇ and CsZn₂(N₃)₅, melting congruently at 170°C and 210°C, resp. In the system KN₃/Zn(N₃)₂ there exist two eutectics at 203°C and 172°C and two compounds, one of them, i.e. K₂Zn(N₃)₄, melting congruently at 206°C, the other one, with composition KZn₃(N₃)₇ or KZn₄(N₃)₉, melting incongruently at 210°C.

---

---

Mit 8 Abbildungen

---

Herrn Professor Dr.Heribert Grubitsch zum 70. Geburtstag gewidmet.     

Further explorations on bridged 1,2,4-trioxanes

Three new bicyclo[3.2.1]-type 1,2,4-trioxanes have been designed and synthesized. One of them demonstrates better tolerance of the intramolecular hemiketals to steric crowding in hydroperoxidation. The other represents a prototype for possible manipulation of the transient radicals generated in cleavage reactions. A new substitution pattern in the bridged system is explored through synthesis of the third molecule. The configurations of all stereogenic centers in the bridged system can be effectively controlled by the chirality of the allyl alcohol as illustrated by the enantioselective synthesis of the fourth molecule. Finally, similar bicyclo[3.3.1]-type 1,2,4-trioxanes are shown very difficult to be synthesized because of the involvement of a conformer with two substituents at axial positions at the same time.     

Mechanism of the oxidation of cycloheptanone by chloramine-T

The oxidation kinetics of cycloheptanone by chloramine-T in alkaline media has been investigated. A mechanism involving the formation of an intermediate by the interaction between the enolic anion of cycloheptanone and chloramine-T in a slow step followed by its interaction with another molecule of chloramine-T in a fast step leading to products has been proposed. The scheme satisfactorily accords with the observed stoichiometry, negligible influence of ionic strength and a positive dielectric effect. Various rate parameters have been computed and 1.2-cycloheptanedione identified as the end product.With 2 Figures     

Anwendung mikroanalytischer Methoden zur Lösung kunst- und kulturgeschichtlicher Probleme

Zusammenfassung Mit bekannten mikroanalytischen Arbeitsmethoden — Oberflächenreaktionen, Abstrichuntersuchungen mit dem Korundstäbchen, Schutzschichtreaktionen sowie dem Abdruckverfahren — lassen sich archaeometrische Probleme einer Lösung näherbringen. Die Art der Korrosion kupferhaltiger Oberflächen wurde diskutiert.

---

Application of microanalytical methods to the solution of artistic- and cultural historical problems

Summary Archeometrical problems are brought closer to a solution by means of known microanalytical procedures-surface reactions, surface scraping studies with the corundum rod, protective layer reactions as well as the imprint method. A discussion of the corrosion of copper-bearing surfaces is included.

---

---

Vortrag anläßlich der Tagung Chemische Analysen — Kunst- und Kulturwissenschaften im Reiß-Museum in Mannheim, 19.–21. September 1974.     

Organic phase conversion of bulk (wurtzite) ZnO to nanophase (wurtzite and zinc blende) ZnO

We describe the all-organic phase conversion of bulk commercial ZnO in the wurtzite modification to sub-30 nm ZnO that we find to be partially in the zinc blende [, a=4.568(3) Å] modification. The conversion involves refluxing ZnO in 2,4-pentanedione (acetylacetone) at 413 K to form the zinc 2,4-pentanedionate, which is decomposed by heating at 573 K in an appropriate high-temperature solvent such as dibenzylether to form nanophase ZnO. This nanophase, partially zinc blende ZnO can also be obtained in a single step by heating commercial zinc 2,4-pentanedionate in refluxing dibenzylether. Thermodiffractometry suggests that the conversion of zinc blende ZnO to wurtzite ZnO commences near 650 K.     

Unusually sharp dependence of water exchange rate versus lanthanide ionic radii for a series of tetraamide complexes

The tetraamide ligand, DOTA-tetra(glycine ethyl ester), forms complexes with the lanthanide(III) cations that exist in solution predominantly as the square antiprism structure with single, slowly exchanging inner-sphere water molecule. Variable-temperature 1H and 17O NMR studies revealed that the bound water lifetimes in these complexes were sharply dependent upon the ionic radius of Ln3+ cation. A novel lanthanide-induced shift technique was used to unmask the bound water 17O resonance of SmL3+ and YL3+ complexes from the bulk water resonance. The bound water lifetime (tauM298) was approximately 800 mus in the EuL3+ complex but became much shorter (several microseconds) for Ln3+ cations with larger and smaller ionic radii. This demonstrates that water exchange is exquisitely fine-tuned in this macrocyclic tetraamide system and that a variety of Ln3+ complexes meet with the exchange requirement, Deltaomega*tauM >/= 1, necessary for an efficient MT agent.     

A Novel pH-Sensitive MRI Contrast Agent

A tetrasubstituted derivative of 1,4,7,10-tetraazacyclododecane with amide coordinating groups and extended noncoordinating phosphonate groups forms a complex with gadolinium(III) (shown in the picture) which contains one slowly exchanging inner-sphere water molecule (tau(M)=21 μs). The 20-MHz water proton relaxivity of the complex was found to be highly pH dependent. Protonation of the noncoordinating phosphonate groups appears to catalyze prototropic exchange of the bound water protons, thereby providing a mechanism for enhanced water contrast below pH 7.     

Sterically demanding diporphyrin ligands and rhodium(II) porphyrin bimetalloradical complexes

A series of sterically demanding diporphyrins H2(por)-X-(por)H2 ligands that contain spacers (X) with different degrees of flexibility were synthesized from the trimesitylporphyrin derivatives 5-(4-hydroxyphenyl)-10,15,20-trimesitylporphyrin (TMP-OH)H2 (1a) and 5-(2,6-dimethyl-4-hydroxyphenyl)-10,15,20-trimesityl-porphyrin, (DMTMP-OH)H2 (1b). The monomeric porphyrins 1a,b, which have steric demands similar to that of tetramesitylporphyrin, (TMP)H2, and carry a hydroxyl functional group at the para position of one of the mesophenyl substituents, were constructed from reaction of pyrrole with two aromatic aldehydes by a mixed aldehyde condensation approach. The diporphyrins with alkyl diether tethers were obtained stepwise from reactions of the hydroxy functionalized porphyrins 1a,b with dibromides Br(CH2)nBr. The diporphyrin which contains a more rigid m-xylylene spacer, was made directly from reaction of 1b with alpha,alpha'-dibromo-m-xylene. Rhodium was inserted into the porphyrins using Rh2(CO)2Cl2 and converted to dimethyl complexes Me-Rh(Por)-X-(Por)Rh-Me. The dirhodium(II) derivatives .Rh(por)-X-(por)Rh.) were generated by photolysis of the dimethyl complexes and observed to occur as stable bimetalloradicals because the ligand steric demands prohibit Rh(II)-Rh(II) bonding. EPR spectra of the dirhodium(II) derivatives, triphenyl phospine adducts, and dioxygen complexes are reported. The kinetic advantage of bimetalloradical complexes for substrate reactions that have two metal-centered radicals in the transition state is demonstrated by reactions of dihydrogen with dirhodium(II) bimetalloradical complexes.     

A new technique for the identification of chloride ions by the formation of chromyl chloride

Summary A new technique is described for the identification of the chloride ion through the formation of chromyl chloride, based on the extraction of the latter with carbon tetrachloride. The identification limit is 2g of chloride. It is possible to carry out the test in the presence of many other anions, including fluoride, which cannot be present when the traditional distillation technique is employed.

---

Zusammenfassung Vorgeschlagen wird eine neue Technik zum Chloridnachweis durch Bildung von Chromylchlorid. Dieser Nachweis beruht auf der Extraktion des Chromylchlorids mit Tetrachlorkohlenstoff. Die Nachweisgrenze liegt bei 2g Chlorid, wobei die Möglichkeit besteht, den Test auch in Gegenwart von Fluorid durchzuführen, das bei Anwendung der üblichen Destillationsmethoden nicht anwesend sein darf.

     

Development of a modified beta-cyclodextrin based fluorosensor for dipyridamole

2,6-O-diethyl-β-cyclodextrins were prepared and immobilized onto silica gel to develop a fluorosensor for dipyridamole. The analytical performance characteristics of the proposed sensor for analysis of dipyridamole were as follows: the detection limit was 0.8 nmol/L with a relative standard deviation of 1.4% for 10 determinations of 50 nmol/L of dipyridamole. The modification of β-CD improved the sensitivity and selectivity for measuring dipyridamole. The recommended method has been successfully tested for the determination of dipyridamole in clinical samples (urine and pharmaceutical preparations). Received: 23 January 1997 / Revised: 14 April 1997 / Accepted: 21 April 1997