Preparation and Characteristics of Porous Silica Films by a Modified Base-Catalyzed Sol-Gel Process Containing PVA: II. Film Preparation

Porous SiO₂ films were successfully deposited on silicon substrates by a modified base-catalyzed Sol-Gel process (MBCP) containing polyvinyl alcohol (PVA). The process conditions, such as the gelation time, the synthesis temperature, the stabilizing agent of the precursor solution and the spin coating speed, the heat-treatment, the annealing temperature of the film on the microstructure and porosity of porous SiO₂ films were systematically investigated by SEM, XRD and ellipsometry techniques. This study provides a novel preparation technique for the porous SiO₂ film. Using this process, the resultant film can reach a thickness of 3.6 m for one layer, a porosity of 25–50%, a low thermal conductivity of 0.11 W/m·K. This film will be used as a low dielectric layer, an thermal-insulating layer and a low refractive index layer.     

Time dependence of viscosity of dilute polyisobutylene solutions

Summary Shearing at constant gradient of polyisobutylene (PIB) solutions in viscous polybutene oils results in time dependent changes of their viscosities. Two PIB fractions (M=8·10⁶ and 3.8·10⁶) have been studied in a variety of solvents, covering the viscosity range from 5 to 0.5·10⁻² poise. The overall phenomenon is similar to that already observed for polymethylmethacrylate, polystyrene, and polyethylene oxide solutions in Aroclor. Results have been discussed in terms of polymer molecular weight and concentration, solvent viscosity and gradient. The systems investigated are free from strong polar interactions and tendency toward molecular aggregation; time dependent changes of viscosity are therefore observable also for true molecularly dispersed solutions.

---

Zusammenfassung Scherung mit konstantem Geschwindigkeitsgradienten von Polyisobutylen (PIB)-L?sungen in viskosen Polybuten-?len ergibt zeitabh?ngige ?nderungen ihrer Viskosit?ten. Zwei PIB-Fraktionen (M=8·10⁶ und 3,8·10⁶) wurden in einer Vielzahl von L?sungsmitteln untersucht, die den Viskosit?tsbereich von 5 bis 0,5·10⁻² Poise überdeckten. Das ph?nomenologische Erscheinungsbild ist ?hnlich dem schon beobachteten für Polymethylmethacrylat, Polystyrol und Poly?thylenoxid-L?sungen in Aroclor. Die Ergebnisse wurden hinsichtlich des Polymer-Molekulargewichts und der Konzentration, der L?sungsmittelviskosit?t und des Gradienten diskutiert. Die untersuchten Systeme sind frei von starken polaren Wechselwirkungen und von Tendenzen in Richtung auf molekulare Aggregation. Zeitabh?ngige ?nderungen der Viskosit?t sind deshalb auch für wahre molekulardisperse L?sungen beobachtbar.

     

Beiträge zur Chemie der Alkylverbindungen von Übergangsmetallen. XLIV. Tetrakis(alkoxycarbonylmethyl)titan-Verbindungen

Contributions to the Chemistry of Transition Metal Alkyl Compounds. XLIII. Tetrakis(alkoxycarbonylmethyl)titanium Compounds Organotitanium(IV) compounds of the type (ROCOCH₂)₄Ti (R ? C₂H₅, i-C₃H₇, t-C₄H₉, C₆H₅, C₆H₅CH₂) were obtained by reactions of ROCOCH₂Li derivatives with TiCl₄ at low temperature. The compounds which decompose only above 90°C were characterized by the hydrolysis products, anaerobic reactions with iodine, and the i.r. spectra. The bond conditions are discussed.     

On the determination of polarity parameters of silica by means of solvatochromic probe dyes

Empirical solvent parameters of silica surfaces are determined by means of solvatochromic dyes, e.g., Cu(tmen) (acac)⁺ ClO ₄ ^– /B(C₆H₅) ₄ ^– , Fe(phen)₂(CN)₂, and Michlers Ketone dissolved in 1,2-dichloroethane or cyclohexane. The values obtained by UV/VIS-measurements are compared with both the polarity scales of Kamlet and Taft and with Gutmann's donor and acceptor numbers. Kamlet and Taft's -parameter (the hydrogen-bond donation capacity of a solvent) is determined independently by means of salicylideneaniline. The ^* of silica is determined using 5-N,N-dimethylamino-5-nitro-2,2-bithiophene and the complex of tetracyanoethylene with Michlers Ketone, respectively. Further on the reliabilities of the obtained Kamlet-Taft parameters , , and ^* are checked by comparism with experimental and calculated values of theE _T(30)-parameter of silica by means of multi-parameter regression analysis. The surface properties of silica are influenced mainly by HBD-properties (75%) and dipolarity/polarizability ^* (20%), but hardly by the HBA-properties (<5%). UV/VIS-measurements were carried out in a special equipment with glass fiber optics, A drawing of the apparatus is given.     

Die Strommer-Zykliden des Flaggenraumes

According to H. BRAUNER a flag space is a three-dimensional affine space with an absolute {,f,F}, wheref is a line in the plane of infinity andF a point onf. A cyclide is a surface of order 4 that intersects only atf. A STROMMER-cyclide is a cyclide generated by translation of a circle in an isotropic plane. In this paper we proof that all STROMMER-cyclides can be generated by translation of an isotropic circle along a divergent Newton-parabola or a conic in a full isotropic plane. We give normal-forms and CAD-pictures of these surfaces. Finaly some geometrical results about STROMMER-cyclides are developed.

---

---

Herrn o.Prof. Dr. Gy. Strommer zum 70. Geburtstag gewidmet.     

Density fluctuations in amorphous and semicrystalline polymers

Summary The small-angle scattering of amorphous and semicrystalline polymers contains an intensity component due to density fluctuations within the crystalline and amorphous domains.For amorphous polymers, the density fluctuations aboveT _g correspond to the theoretical value for a fluid system in thermodynamic equilibrium. BelowT _g , a temperature dependence proportional to T is observed over a range of about 50°. At lower temperatures, a linear relationship with a smaller slope has been found which extrapolates to a non-zero value at 0 °K. This value corresponds to the frozen-in disorder, the slope at low temperatures is related to thermal vibrations and can be evaluated in terms of photon-phonon scattering.Semicrystalline polymers show a temperature dependence of the density fluctuation similar to that of the amorphous polymers. At constant temperature the density fluctuations vary linearly with crystallinity.Natural rubber shows an increase of the density fluctuations with increasing cross-linking densities from which information on the density changes in the vicinity of a cross-link and on the statistics of the distribution of cross-linking can be obtained.

---

Zusammenfassung Die Kleinwinkelstreuung amorpher und teilkristalliner Polymere besitzt eine Intensitätskomponente, die von Dichtefluktuationen innerhalb der kristallinen und amorphen Bezirke herrührt. Für amorphe Polymere entspricht die Dichtefluktuation oberhalb vonT _g dem theoretischen Wert für ein fluides System im thermodynamischen Gleichgewicht. UnterhalbT _g wird eine Temperaturabhängigkeit proportional zuT über einen Bereich von etwa 50° beobachtet. Bei tieferen Temperaturen wird eine lineare Beziehung mit einer geringeren Steigung gefunden, welche zu einem endlichen Wert bei 0 °K extrapoliert werden kann. Dieser Wert bezieht sich auf die eingefrorene Fehlordnung, die Steigung bei tiefen Temperaturen ist auf thermische Schwingungen zurückzuführen und kann als Photon-Phonon-Streuung ausgewertet werden.Teilkristalline Polymere zeigen eine Temperaturabhängigkeit der Dichtefluktuation, die der von amorphen Polymeren ähnlich ist. Bei konstanter Temperatur ändert sich die Dichtefluktuation linear mit der Kristallinität.Naturkautschuk zeigt eine mit der Vernetzungsdichte ansteigende Dichtefluktuation, aus der man Information über die Dichteänderung in der Umgebung eines Netzpunktes und die Statistik der Netzpunktverteilung erhalten kann.

     

Organo-tricyanoborates as tectons: illustrative coordination polymers based on copper(I) derivatives

The first systematic study on the use of tricyanoborates as ligands is presented. The tricyanoborates [RB(CN)3]- (R = oct and Ph) can be prepared by direct cyanation of RBCl2 precursors as well as by thermolysis of the corresponding isocyanides [RB(NC)3]-. The first organo-cyanogallates [RGa(CN)3]- (R = Bu, C6H2-2,4,6-Me3) were prepared from the corresponding dichloride, the structure of Et4N[mesGa(CN3] being confirmed crystallographically. The reaction of equimolar [RB(CN)3]- (R = oct, Ph) and [Cu(MeCN)4]+ afforded two-dimensional polymers [RB(CN)3Cu(NCMe)]. The sheets arise via conjoined hexagonal B3Cu3(CN)6 rings with chair conformations. The reaction of excess [PhB(CN)3]- and [Cu(MeCN)4]+ gives the polymer [K(18-crown-6)]{Cu[PhB(CN)3]2}. Treatment of [PhB(CN)3]- with [Cu(PCy3)2(NCMe)x]PF6 gave the one-dimensional polymer [PhB(CN)3Cu(PCy3)2], wherein two of the three BCN substituents are coordinated.     

Absolute infrared intensities of hydrocarbons

Dipole-moment derivatives, calculated by both the CNDO/2 method with different parameterizations and the INDO method, are compared to the experimental values determined from absolute infrared intensity measurements for the IR active modes of methane, ethane, ethylene and acetylene. A parameter refinement procedure is introduced in which the CNDO/2 molecular orbital parameters are adjusted through a damped least-squares treatment to give best agreement with the observed dipole-moment derivatives. It is found that the refinement does not substantially improve the agreement obtained with the original CNDO/2 parameterization. The INDO method gives somewhat poorer agreement than the CNDO/2 calculations. As an example of the applicability of the molecular orbital methods toward reproducing relative infrared intensities, the spectrum of cyclopropane in the gasphase is examined.

---

Zusammenfassung Die Ableitungen des Dipol-Moments, die nach der CNDO/2-Methode mit verschiedenen Parametrisierungen sowie der INDO-Methode berechnet wurden, werden mit den experimentellen Ergebnissen aus Messungen der absoluten Infrarot-Intensitäten für die IR-aktiven Schwingungen von Methan, Äthan, Äthylen und Azetylen verglichen. Die CNDO/2-Parameter werden mit einer Methode der kleinsten Quadrate den beobachteten Dipol-Moment-Ableitungen angepaßt. Die Ergebnisse sind jedoch nicht wesentlich von denen der ursprünglichen CNDO/2-Methode verschieden. Die INDO-Ergebnisse sind nicht so gut wie die CNDO/2-Ergebnisse. Als Beispiel der Anwendbarkeit der MO-Methoden zur Berechnung von relativen IR-Intensitäten wird das Spektrum des Cyclopropans in der Gasphase untersucht.

---

Résumé Les dérivées du moment dipolaire, calculées par la méthode CNDO/2 avec différentes paramétrisations et par la méthode INDO, sont comparées aux valeurs expérimentales déterminées à partir de mesures d'intensité absolue pour les modes actifs dans l'infra-rouge dans le méthane, l'éthane, l'éthylène et l'acétylène. Les paramètres sont ajustés de manière à donner le meilleur accord avec les dérivées du moment dipolaire. Cet ajustement n'améliore pas sensiblement l'accord obtenu avec la paramétrisation CNDO/2 originale. La méthode INDO donne des résultats moins bons que les calculs CNDO/2. Le spectre du cyclopropane en phase gazeuse est étudié comme exemple de l'applicabilité de la méthode des orbitales moléculaires au calcul des intensités relatives infra-rouge.