Generation of 100 μJ pulses at 82.8 nm by frequency tripling of sub-picosecond KrF laser radiation

. Investigations of the efficient generation of powerful coherent radiation at 82.8 nm by frequency tripling of short-pulse KrF laser radiation are presented. Argon gas is selected as nonlinear medium due to the resonantly enhanced 3rd-order susceptibility χ⁽³⁾(-3ω,ω,ω,ω). Pulse energies of 100 μJ at 82.8 nm have been measured for a pump pulse energy of 14 mJ. An upscaling to more than 500 μJ is expected with available more powerful pump lasers. Features of this XUV source and possible applications are discussed. Received: 26 July 2002 / Published online: 15 November 2002 RID="*" ID="*"Corresponding author. Fax: +49-511/7622211, E-mail: reinhardt@iqo.uni-hannover.de     

Rigidity percolation in particle-laden foams

We study the viscoelastic behavior of aqueous foam mixed with solid noncolloidal particles. We show that adding a tiny amount of grains can enhance the elastic and loss shear moduli by more than 1 order of magnitude. The scaling of these moduli with solid volume fraction is in qualitative agreement with that predicted by an effective-medium rigidity percolation model. We present a simple model, based on capillary attraction, to explain the particle-size dependence of the threshold.     

Soft x-ray laser spectroscopy on trapped highly charged ions at FLASH

In a proof-of-principle experiment, we demonstrate high-resolution resonant laser excitation in the soft x-ray region at 48.6 eV of the 2 (2)S(1/2) to 2 (2)P(1/2) transition of Li-like Fe23+ ions trapped in an electron beam ion trap by using ultrabrilliant light from Free Electron Laser in Hamburg (FLASH). High precision spectroscopic studies of highly charged ions at this and upcoming x-ray lasers with an expected accuracy gain up to a factor of a thousand, become possible with our technique, thus potentially yielding fundamental insights, e.g., into basic aspects of QED.     

Beam-helicity asymmetry in photon and pion electroproduction in the Δ(1232)-resonance region at Q2 = 0.35(GeV/c)2

The beam-helicity asymmetry has been measured simultaneously for the reactions p→epγ and p→epπ ⁰ in the Δ(1232)-resonance region at Q ² = 0.35(GeV/c)². The experiment was performed at MAMI with a longitudinally polarized beam and an out-of-plane detection of the proton. The results are compared with calculations based on dispersion relations for virtual Compton scattering and with the MAID model for pion electroproduction. There is an overall good agreement between experiment and theoretical calculations. The remaining discrepancies may be ascribed to an imperfect parametrization of some γ ^(*) N→πN multipoles, mainly contributing to the non-resonant background. The beam-helicity asymmetry in both channels (γ and π ⁰) shows a good sensitivity to these multipoles and should allow future improvement in their parametrization.     

(Im-)possible ISOL beams

Refractory elements, i.e. elements with very high melting point and low vapor pressure, cannot be released in atomic form from an ISOL target. Therefore most of these elements are presently not available as ISOL beams. However, when reactive gases are introduced into the target, they may form volatile compounds with the refractory elements, allowing for an easier transport to the ion source. Particularly useful are high-temperature stable fluorides and oxides. By these chemical evaporation methods so far ISOL beams of the refractory elements C, Zr, Hf and Ta have been produced. We discuss how ISOL beams of B, Ti, Nb, Mo, Tc, Ru, W, Re, Os and Ir could be produced in a similar way.     

Fluorescence Correlation Spectroscopy (FCS): A Promising Tool for Biological Research

Abstract

Fluorescence correlation spectroscopy (FCS) is an important biophysical technique. FCS is currently being used in many areas of biology to solve several scientific problems. Its properties such as detection at the single molecular level, higher sensitivity, and use of lower sample volume make FCS a promising molecular diagnostic tool. The promising applications of FCS extend from DNA kinetics/dynamics studies to the comprehensive understanding of receptor–ligand interactions. In this article, we review various promising biological applications of FCS.     

Generation of hard X-ray radiation using the triboelectric effect by peeling adhesive tape

The triboelectric effect describes electrical charging when bringing different materials into contact. We report on the generation of hard X-ray radiation by peeling various adhesive tapes under medium vacuum conditions. Beside vacuum housing and pumps as instrumentation only an electric motor, two rolls and a metal foil as target material are necessary. The spectral distribution of generated X-rays was analyzed using an energy-dispersive detector. Depending on peeling speed, pressure and choice of material combination, electrons with energies sufficient to excite emission in the hard X-ray region are produced. The results are discussed in terms of triboelectric separation of charge carriers.     

Pyrolysis study of poplar biomass by tunable synchrotron vacuum ultraviolet photoionization mass spectrometry

Pyrolysis is one of the most important methods to convert biomass into biofuel, which is a potential substitute for fossil fuel. The pyrolysis process of poplar biomass, a potential biofuel feedstock, has been studied with tunable synchrotron vacuum ultraviolet (SVUV) photoionization mass spectrometry (PIMS). The mass spectra at different photon energies, temperatures, and time-evolved profiles of selected species during poplar pyrolysis process were measured. Our results reveal that poplar is typical of hardwood according to its relative contents of three lignin monomeric precursors. As temperature increases from 300 to 700 °C, the overall intensities of pyrolysis products decrease due to the gas-phase cracking. Observed intensities of syringyl and guaiacyl subunits of lignin in poplar at low temperature present different trends: the intensities of syringyl subunits of lignin undergo an increase firstly and then a decrease, whereas those of guaiacyl subunits of lignin show decrease continuously. Time-dependent data demonstrate that hemicellulose pyrolysis is faster than lignin in poplar. This work reports a new application of SVUV PIMS in biomass pyrolysis, which performs very well in products analysis.     

Zur Methodik der Autoradiographie im Elektronenmikroskop

Die elektronenmikroskopische Autoradiographie erlaubt unter Ausmutzung des hohen Auflösungsvermögens des Elektronenmikroskops eine exakte Lokalisierung radioaktiver Verbindungen in Präparaten. Voraussetzung dafür ist die Herstellung einer Einkornschicht des Silberhalogenids aus einer vorgegebenen Filmemulsion. Diese Einkornschicht mit möglichst gleichmäßiger Silberhalogenidverteilung muß dann auf das radioaktive Objekt aufgebracht werden. Nach einer Übersicht über die Versuchsmethode werden Untersuchungen zur Präparation von Silberhalogenid-Einkornschichten aus den Emulsionen ORWO K 2, K 5, K 6, Ilford L 4 und Gevaert Nuc 7.15 für die elektronenmikroskopische Autoradiographie dargestellt.     

Gastrennung mit Hilfe des Zirkulations-Diffusions-Verfahrens Teil I : Hochanreicherung von Gasen in Trennrohren mit natürlicher Zirkulation

Auf der Grundlage des Zirkulations-Diffusions-Prinzips wurden zwei Trennrohre für die Hochanreicherung von Gasen enytwickelt. Als Modellgasmischungen dienten H₂-N₂ Kr-CH₄ und Luft. Neben Wasserdampf wurden Methanol- und Äthaanoldämpfe als Treibmittel benutzt. Gute Trennungen wurden in einem nur 20 cm langen Rohr erzielt, dessen Trennspalt horizontal durch Lamellen in kleine Sektionen und durch ein Drahtdiaphragma vertikal in zwei Ringkammern geteilt wird. Drei Rohre dieses Typs wurden in einer rechteckigen Kaskadenanordnung getestet. Die Theorie des Transportes im Trennrohr sowie die Behandlung des hydrodynamischen Problems werden angegeben. Eine Anwendung des beschriebenen Trennrohres zur Isotopentrennung und zur Gashochanreicherung erscheint aussichtsreich.