Polymerization of cyclopentadiene initiated by methylaluminoxane

The polymerization of cyclopentadiene (CPD) was effectively initiated by methylaluminoxane (MAO) to generate poly(cyclopentadiene) (polyCPD). The effects on the polymerization of some reaction parameters such as the monomer concentration, the initiator concentration, and solvents were investigated. The conversion of CPD was monitored with gas chromatography to investigate the reaction kinetics. The polymerization rate was proportional to the concentrations of MAO in the first order and of the CPD monomer in the second order, and a reasonable cationic polymerization mechanism was suggested on the basis of the kinetic study. PolyCPD obtained at a low temperature could be dissolved in toluene or chloroform, and this indicated lower cross‐coupling during the polymerization reaction. ¹H NMR and IR analysis of the polymer indicated that there were almost equal amounts of 1,2‐enchainment and 1,4‐enchainment in the polymer chain. The measurement of polyCPD showed its unique properties as a potential candidate for stable wrappings or electronic packaging materials. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 264–272, 2006     

Sulfonated poly(aryl ether ether ketone ketone)s containing fluorinated moieties as proton exchange membrane materials

A series of sulfonated poly(aryl ether ether ketone ketone)s statistical copolymers with high molecular weights were synthesized via an aromatic nucleophilic substitution polymerization. The sulfonation content (SC), defined as the number of sulfonic acid groups contained in an average repeat unit, could be controlled by the feed ratios of monomers. Flexible and strong membranes in sodium sulfonate form could be prepared by the solution casting method, and readily transformed to their proton forms by treating them in 2 N sulfuric acid. The polymers showed high T_gs, which increased with an increase in SC. Membranes prepared from the present sulfonated poly(ether ether ketone ketone) copolymers containing the hexafluoroisopropylidene moiety (SPEEKK‐6F) and copolymers containing the pendant 3,5‐ditrifluoromethylphenyl moiety (SPEEKK‐6FP) had lower water uptakes and lower swelling ratios in comparison with previously prepared copolymers containing 6F units. All of the polymers possessed proton conductivities higher than 1 × 10^?2 S/cm at room temperature, and proton conductivity values of several polymers were comparable to that of Nafion at high relative humidity. Their thermal stability, oxidative stability, and mechanical properties were also evaluated. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2299–2310, 2006     

Chiral separation of synthetic vicinal diol compounds by capillary zone electrophoresis with borate buffer and beta-cyclodextrin as buffer additive.

The investigation on capillary electrophoretic enantioseparation of six synthetic compounds containing vicinal diol groups has been undertaken to acquire the optimum conditions using native beta-cyclodextrin (beta-CD) as chiral selector and borate as a background electrolyte. The separation was carried out in an uncoated capillary (58.5 cm x 75 microm i.d., effective length 48.5 cm) and the effects of several important factors were investigated in detail. The results showed that beta-CD as a chiral selector exhibited good enantioselectivity and that the enantioseparation was greatly influenced by the structure of the diols, the borate concentration and the buffer pH. The optimum performance was obtained for the chiral vicinal diols under the conditions of 200 mM borate buffer of pH 9.8 containing 1.7% beta-CD at an applied voltage of 15 kV and a capillary temperature of 20 degrees C. Under the conditions, four diols were baseline separated with fast analysis time and the good theoretical plate numbers (above 10 x 10(4)) and favorable migration-time reproducibilities (RSDs below 3.0%) were obtained. The separation results were satisfactory.     

Determination of 17 kinds of banned organochlorine pesticides in water by activated carbon fiber-solid phase microextraction coupled with GC-MS.

Activated carbon fiber (ACF) as extraction fiber for solid-phase microextraction (SPME) and its application for the analysis of banned organochlorine pesticides (OCPs) were investigated. Firstly, ACF was activated by different concentration of zinc chloride, which indicated that ACF activated by 60% zinc chloride had a reasonable specific surface area, pore volume and pore distribution. Secondly, the parameters for the ACF-SPME procedure, the adsorption and desorption conditions, were also optimized when coupled with gas chromatography-mass spectrometry (GC-MS). Thirdly, the ACF-SPME was used to analyze 17 kinds of OCPs in water. The linearity of most pesticides was found to be between 0.2 and 50 microg/l with GC-MS under the selected ion monitoring (SIM) acquisition mode. The limits of detection (LOD) at the sub microg/l were obtained. The work demonstrated here shows that ACF is a promising alternative for the SPME procedure.     

Determination of inosine 5′-monophosphate and guanosine 5′-monophosphate in pig feed by capillary zone electrophoresis

A capillary zone clectrophoresis method was developed for the determination of IMP and GIMP, commonly used as flavor enhancers in poultry feed, in a real sample of complex composition. A baseline separation of inosine 5′-monophosphate and guanosine 5′-monophosphate was achieved within 10 min and the other components in the sample did not interfere with the separation. Quantitative results obtained from pig feed samples are presented. The separation conditions and experimental reproducibility are also discussed.     

Stereochemie von Metallocenen, 40. Mitt.

Starting from optically active methylferrocene-- and--carboxylic acids (1 a and1 b) of known absolute configuration and enantiomeric purity about 15 chiral ferrocenes (of each isomeric series— and ) were obtained by suitable ligand transformations. Thereby (almost) all possible chiral combinations of the ligands CH₃, COOH (COO^–), COOCH₃, CN and NH₂ (NH₃ ⁺) were accessible which are necessary for a potential test of approximations of chirality functions for compounds with basic symmetry C_5v. The chiroptical properties of these disubstituted ferrocenes are recorded.Preliminary tests using a shortened Ansatz revealed large discrepancies between calculated () and found [M]_D-values. Possible reasons for this failure are discussed.

---

---

61. Mitt. über Ferrocenderivate

---

39. Mitt.:A. Meyer, H. Neudeck undK. Schlögl, Chem. Ber.110, 1403 (1977).

---

60. Mitt.:V. Rapi, K. Schlögl undB. Steinitz, J. Organometal. Chem.94, 87 (1975).     

Wirkungsgrade in der Welt des Lebens und der Technik

Zusammenfassung Um der oft gehörten Meinung entgegenzutreten, die energetischen Wirkungsgrade lebender Organismen seien wesentlich höher als die technischer Verfahren, werden entsprechende Werte miteinander verglichen. Der sehr niedrige Wirkungsgrad der Photosynthese zusammen mit der kleinen Energiedichte der Sonnenstrahlung erzwang ab einer kritischen Größe die Aufspaltung in Energiesammler, die Pflanzen, und Verbraucher chemischer Energie, den Tieren. Dank den 10 mal höheren Wirkungsgraden in der Technik, lassen sich Solarmobile bauen, die von der auf sie fallenden Sonnenstrahlung angetrieben werden. Wegen des Multiplikationsgesetzes der Teilwirkungsgrade ergeben sich sowohl für die Speicherung der Sonnenenergie in den fossilen Brennstoffen wie in der Nahrungskette extrem niedrige Wirkungsgrade.

---

Efficiencies in the world of life and in engineering

One often hears the opinion, that the efficiencies in the world of life are higher than in engineering. To disprove this, many values of efficiency of corresponding processes are compared. The very low efficiency of photosynthesis in living plants together with the low density of solar radiation has led the world of life to split into collectors of energy, the plants, and consumers of chemical energy, the animals. Thanks to the ten times higher efficiencies of solar cells, it is possible, to produce solar mobiles, vehicles that move driven by solar radiation.

---

---

Herrn Prof. Dr.-Ing. U. Grigull zum 75. Geburtstag gewidmet     

Umsetzung von hydrobromiertem 1,4-Polybutadien mit lithiumorganischen Verbindungen

Ohne ZusammenfassungMit 1 Abbildung und 1 Tabelle     

Die Schmelzdiagramme der Systeme CsN3/Zn(N3)2 und KN3/Zn(N3)2

The phase diagrams of the systems CsN₃/Zn(N₃)₂ and KN₃/Zn(N₃)₂ have been obtained employing the microscopic technique ofL. Kofler andA. Kofler. Within the system CsN₃/Zn(N₃)₂ three eutectics at 148°C, 142°C, and 210°C were found. Besides Cs₂Zn(N₃)₄, melting incongruently in the interval 153°C to 170°C, there exist two further compounds of the most probable composition Cs₃Zn₂(N₃)₇ and CsZn₂(N₃)₅, melting congruently at 170°C and 210°C, resp. In the system KN₃/Zn(N₃)₂ there exist two eutectics at 203°C and 172°C and two compounds, one of them, i.e. K₂Zn(N₃)₄, melting congruently at 206°C, the other one, with composition KZn₃(N₃)₇ or KZn₄(N₃)₉, melting incongruently at 210°C.

---

---

Mit 8 Abbildungen

---

Herrn Professor Dr.Heribert Grubitsch zum 70. Geburtstag gewidmet.