Application of the ellipsoid method in an interactive procedure for multicriteria linear programming

The research reported in this paper is concerned with an application of the ellipsoid algorithm in the interactive multicriteria linear programming step method (STEM) byBenayoun et al. [1971]. Due to this application we eliminate some drawbacks of the original version of STEM and, moreover, we avoid extra computations connected with sensitivity analysis in every iteration. Specifically, we use the ellipsoid algorithm to minimize the Euclidean norm in the criterion space instead of the Chebyshev norm, which ensures that every solution submitted to the decision maker is efficient. As follows from a computational experiment, in comparison with the application of the simplex method, the proposed modification of STEM shows a smaller increase of the computational effort when the number of criteria increases. However, the absolute computation time becomes worse for problems of larger size.

---

Zusammenfassung In dieser Arbeit wird über eine Anwendungsmöglichkeit der Khachiyan-Shor-Algorithmus (Ellipsoid-Algorithmus) im Rahmen des STEM-Verfahrens zur interaktiven Lösung linearer Vektoroptimierungsmodelle berichtet. Auf diese Weise können einige spezifische Nachteile des STEM-Verfahrens in seiner Originalversion vermieden werden. Durch die Verwendung der Euklidischen Norm anstelle der beim STEM-Verfahren üblichen Tschebyscheff-Norm wird garantiert, daß dem Entscheidungsträger nur effiziente Lösungen vorgeschlagen werden. Die numerischen Erfahrungen zeigen, daß der Lösungsaufwand der hier vorgeschlagenen Modifikation des STEM-Verfahrens mit steigender Anzahl von Zielfunktionen weniger stark zunimmt als bei der üblichen Version. Dies gilt jedoch nicht hinsichtlich der allgemeinen Problemgröße.

     

Strukturviskosität von verdünnten Lösungen von Biopolymeren

The importance of the rheological behaviour of solutions of macromolecules is briefly evaluated. The viscosity of the solutions depends on concentration, shear rate and time of shear, this relation being determined by the structure of the dissolved molecules. In dilute solutions shear dependence of viscosity is very frequently caused by the preferential orientation of anisotropic molecules. In such a case the particle dimensions can be calculated from the true limiting viscosity number, an anisotropy factor, the rotational diffusion constant and the effective particle density. These numbers can be derived from the flow curve, which has been extrapolated to zero concentration. It is necessary to measure the flow curve at shear gradients, which are sufficiently low to allow for an extrapolation to vanishing shear rate. By comparing the experimental flow curve with a choice of theoretical ones, the rotational diffusion constant and the anisotropy factor (axial ratio) can be found. From the limiting viscosity number and the axial ratio, the particle density can be calculated.     

Komplexe von 2,6-Dimethylpyridin-1-oxid mit Lanthanidjodiden

Complexes of 2,6-dimethylpyridine 1-oxide with lanthanide iodides of the formulaeLn(2,6-LTNO)₅I₃ whereLn=La, Tb and Yb,Ln(2,6-LTNO)₄I₃ whereLn=Pr and Nd and Er(2,6-LTNO)_4.5I₃ have been prepared and characterised by chemical analysis, infrared and conductance studies. Infrared and conductance data have been interpreted in terms of dimeric (or polymeric) structures involving bridging amine oxide groups.

---

---

Mit 2 Abbildungen     

Über die Synthese von 5-(o-Trifluormethylphenyl)-1H-thieno[3,4—e]-1,4-diazepin-2(3H)-onen

The synthesis of 5-(o-trifluoromethylphenyl)-1H-thieno-[3,4-e]1,4-diazepin-2(3H)-one (7) and its nitration and chlorination in pos. 8 are described.     

Berechnung von mittleren Schwingungsamplituden einiger tetraedrischer Moleküle und Ionen nach der Methode der charakteristischen Schwingungen

Mean amplitudes of vibration of a series of tetrahedralXY ₄ molecules and ions (hydrides, halides, oxides and oxoanions) have been calculated using the “Method of the Characteristic Vibrations” ofA. Müller. The results indicate that this method leads to very good values for most of the investigated species, and especially in the cases of highM _X/M_Y mass ratio.     

The Mitsunobu Reaction: Origin,Mechanism, Improvements,and Applications

The Mitsunobu reaction is a widely used and versatile method for the dehydrative oxidation–reduction condensation of an acid/pronucleophile usually with a primary or secondary alcohol that requires the combination of a reducing phosphine reagent together with an oxidizing azo reagent. The utility of this reaction stems from the fact that it is generally highly stereoselective and occurs with inversion of the stereochemical configuration of the alcohol starting material. Furthermore, as carboxylic acids, phenols, imides, sulfonamides, and other compounds can be used as the acid/pronucleophile, this reaction is useful for the preparation of a wide variety of functional groups. This Focus Review of the Mitsunobu reaction summarizes its origins, the current understanding of its mechanism, and recent improvements and applications.     

Carbonyldinitrosyltris(fluorosulfato)tungstate(II) and ‐Molybdate(II) Anions: Synthesis,Spectroscopy, and Density Functional Theory Calculations

Carbonyldinitrosyltris(fluorosulfato)tungstate(II) and ‐molybdate‐(II) anions, [fac‐M(CO)(NO)₂(SO₃F)₃]^? (M=W, Mo), which are novel weakly coordinating anions that contain a metal carbonyl/nitrosyl moiety, have been generated in fluorosulfonic acid and completely characterized by multinuclear NMR, IR, and Raman spectroscopy as well as ESI mass spectrometry. ESI MS measurements performed for the first time on a superacidic solution system unambiguously reveal the formation of the monoanionic, mononuclear W and Mo complexes formulated as [M(CO)(NO)₂(SO₃F)₃]^? (M=W, Mo). Multinuclear NMR spectroscopic studies at natural abundance and ¹³C and ¹⁵N enrichment clearly indicate the presence of one CO ligand, two equivalent NO ligands, and two types of nonequivalent SO₃F^? groups in a 2:1 ratio. The IR and Raman spectra reveal that the two equivalent NO ligands have a cis conformation, thus indicating a fac structure. Density functional calculations at the B3LYP level of theory predict that these anions have a singlet ground state (¹A′) with a C_s symmetry along with C–O and N–O vibrational frequencies that are in agreement with the experimental observations. Mulliken population analysis shows that the monovalent negative charge is dispersed on the bulky sphere, the surface of which is covered by all the negatively charged O and F atoms with charge densities much lower than SO₃F^?, suggesting that [fac‐M(CO)(NO)₂(SO₃F)₃]^? (M=W, Mo) are weakly nucleophilic and poorly coordinating anions.     

Folded chain crystals as micro-phases

Summary A thermodynamic treatment of homo-polymer systems out of linear chains with folded chain crystals is developed outgoing from appropriate models for single component systems. An expansion of thermodynamics to multi-micro-phase systems the structure of which is partially or totaly frozen is indispensable. General properties of melt crystallized homopolymers with folded chain crystals can be recognized indeed when the thermodynamic formalisms developed are applied.

---

Zusammenfassung Das Schmelzen in polymeren Einteilchensystemen mit Faltungskristallen einheitlicher Dicke kann thermodynamisch als Umwandlung 1. Ordnung in einer Richtung behandelt werden, wenn die Faltungslänge bis zur Umwandlungstemperatur konstant bleibt (Faltungslänge als innerer Zusatzparameter). Eine wesentliche begriffliche Erweiterung ist für eine phänomenologische Beschreibung mit den Mitteln der Thermodynamik unumgänglich, wenn eine Faltungskristallit-Dickenverteilung existiert, weil dann prinzipiell nur noch partielle Koexistenz bestimmter Fraktionen metastabiler autonomer Mikrophasen mit der Schmelze möglich ist. Partielles Aufschmelzen und Rektistallisation können so dann auch in Betracht genommen werden. Die entwickelten Konzeptionen bewähren sich in der Anwendung auf bekannte Experimente.

---

Notation g ^c (y);g ^m (Y) molar Gibbs-free energy of a chain of a lengthy within an extended chain crystal and the melt rsp - g _o ^c ;g _o ^m molar free enthalpy of the unit in the crystal lattice and the melt rsp - g(y,y, f) molar Gibbs-function of an ideally folded chain crystal with the fold heighty _f - gco(y, y _ef,y _f) molar free enthalpy of the crystal corey _co - g ₀ ^ex ((y_ef) excess free enthalpy of the longitudinal layers of folded chain crystals - g ^f(y_ef,g _o ^ex ) molar free enthalpy of the longitudinal layers of the folded chain crystals - g ^tot molar free enthalpy of a chain of the lengthy within a folded chain crystal with longitudinal layers - h _o ^1c ,h _o ^m molar enthalpy of the chain unit within the crystal lattice and the melt rsp - h =h _o ^m -h _o ^c molar heat of fusion of the unit - C _p=C _p ^m -C _p ^c difference of the molar specific heat of a unit within the melt and within the chain crystal - h ^D molar defect enthalpy of local defects within the crystal lattice - h ^D molar defect enthalpy of the unit - s _o ^c ,s _o ^m molar entropy of the chain unit within the crystal lattice and the melt rsp - s _c ^m conformational entropy of a chain in the melt - s _gk conformational entropy of a chain of lengthy within a super-lattice as indicated in figure 5, - s molar entropy of fusion of the melt - s _n ^c nematic configurational entropy - T absolute temperature - T _M melting temperature of extended chain crystals of infinite size - T _M(y) melting temperature of extended chain crystals containing only chains of the lengthy - T _M (y, y _f) melting temperatureof folded chain crystals of the thicknessy _f composed of chains of the lengthy - T _M(y _f) melting temperature of folded chain crystals of the thicknessy _fy - _eh excess free enthalpy of the chain ends occupying crystallographic places - _ef excess free enthalpy of a single fold loop - z coordination number of the lattice - 7 Euler's constant - R Boltzmann's constant - y number of chain units - y _f height of lamelliform folded chain crystals - f=(y/y _f - 1) number of fold loops of a chain of a lengthy when being built into a folded chain crystal of the thicknessy _f - y _co thickness of the crystal core of the simplified twophase model - y _et average thickness of the surface layers of folded chain crystals - N _c number of crystallized units of a chain of the lengthy - x _c molar number of crystallized units of a chain of the lengthy - x _nc molar number of noncrystallized units - excess free enthalpy parameter - (y _f) thickness distribution of the fold heightsy _f With 15 figures and 2 tables     

Über 1-Alkyl-bzw. 1-Aryl-dihydro-6-methyl-2(1H)-pyrimidinthione

The title compounds7 are formed in a general reaction by heating β-isothiocyanoketones3 with primary amines in inert solvents, or by thermal elimination of water from tetrahydro-6-hydroxy-6-methyl-2(1H)-pyrimidinethiones5, also in inert solvents. The 1-alkyl compounds can also be prepared under similar conditions from α,β-unsaturated ketones by reaction with alkylammonium rhodanides. The NMR-spectra show that the 1-substituted dihydro-6-methyl-2(1H)-pyrimidinethiones are in tautomeric equilibrium with the tetrahydro-6-methylene-2(1H)-pyrimidinethiones13. The reactivity of 1-alkyl and 1-aryldihydro-6-methyl-2(1H)-pyrimidinethiones is similar to that of dihydro-4,4,6-trimethyl-2(1H)-pyrimidinethione7 j, although their ring stability is certainly less.     

Beiträge zur Chemie des Sulfamids, 1. Mitt.: Zur Konstitution des Disilber-sulfamids

According to spectroscopic (IR, broadline proton NMR) and chemical (alkylation) investigations of disilver sulphamide the following molecular structure is assumed: $$\begin{gathered} O \hfill \\ || \hfill \\ H_2 N\_\_S\_\_NAg| \hfill \\ OAg \hfill \\ \end{gathered}$$ From the IR and NMR data deduction concerning the nature of the chemical bonds in this compound is possible. The instability of the still unknown mono-and trisilver sulphamide is discussed with regard to the structure of disilver sulphamide.