Time dependence of viscosity of dilute polyisobutylene solutions

Summary Shearing at constant gradient of polyisobutylene (PIB) solutions in viscous polybutene oils results in time dependent changes of their viscosities. Two PIB fractions (M=8·10⁶ and 3.8·10⁶) have been studied in a variety of solvents, covering the viscosity range from 5 to 0.5·10⁻² poise. The overall phenomenon is similar to that already observed for polymethylmethacrylate, polystyrene, and polyethylene oxide solutions in Aroclor. Results have been discussed in terms of polymer molecular weight and concentration, solvent viscosity and gradient. The systems investigated are free from strong polar interactions and tendency toward molecular aggregation; time dependent changes of viscosity are therefore observable also for true molecularly dispersed solutions.

---

Zusammenfassung Scherung mit konstantem Geschwindigkeitsgradienten von Polyisobutylen (PIB)-L?sungen in viskosen Polybuten-?len ergibt zeitabh?ngige ?nderungen ihrer Viskosit?ten. Zwei PIB-Fraktionen (M=8·10⁶ und 3,8·10⁶) wurden in einer Vielzahl von L?sungsmitteln untersucht, die den Viskosit?tsbereich von 5 bis 0,5·10⁻² Poise überdeckten. Das ph?nomenologische Erscheinungsbild ist ?hnlich dem schon beobachteten für Polymethylmethacrylat, Polystyrol und Poly?thylenoxid-L?sungen in Aroclor. Die Ergebnisse wurden hinsichtlich des Polymer-Molekulargewichts und der Konzentration, der L?sungsmittelviskosit?t und des Gradienten diskutiert. Die untersuchten Systeme sind frei von starken polaren Wechselwirkungen und von Tendenzen in Richtung auf molekulare Aggregation. Zeitabh?ngige ?nderungen der Viskosit?t sind deshalb auch für wahre molekulardisperse L?sungen beobachtbar.

     

Fullerenes-extracted soot: a new adsorbent for collecting volatile organic compounds in ambient air

Fullerenes-extracted soot (FES) is the by-product of fullerenes production. Retention characteristics at different temperatures for 17 volatile organic compounds (VOCs) on FES are measured. The adsorption and desorption efficiencies for VOCs on FES adsorbent tubes range from 40.8 to 117%, most of them being 100+/-20%. The values are compared with Tenax GR, an adsorbent commonly used in environmental analysis. FES can be used as an adsorbent of low cost to collect VOCs in environmental samples.     

Beiträge zur Chemie der Alkylverbindungen von Übergangsmetallen. XLIV. Tetrakis(alkoxycarbonylmethyl)titan-Verbindungen

Contributions to the Chemistry of Transition Metal Alkyl Compounds. XLIII. Tetrakis(alkoxycarbonylmethyl)titanium Compounds Organotitanium(IV) compounds of the type (ROCOCH₂)₄Ti (R ? C₂H₅, i-C₃H₇, t-C₄H₉, C₆H₅, C₆H₅CH₂) were obtained by reactions of ROCOCH₂Li derivatives with TiCl₄ at low temperature. The compounds which decompose only above 90°C were characterized by the hydrolysis products, anaerobic reactions with iodine, and the i.r. spectra. The bond conditions are discussed.     

On the determination of polarity parameters of silica by means of solvatochromic probe dyes

Empirical solvent parameters of silica surfaces are determined by means of solvatochromic dyes, e.g., Cu(tmen) (acac)⁺ ClO ₄ ^– /B(C₆H₅) ₄ ^– , Fe(phen)₂(CN)₂, and Michlers Ketone dissolved in 1,2-dichloroethane or cyclohexane. The values obtained by UV/VIS-measurements are compared with both the polarity scales of Kamlet and Taft and with Gutmann's donor and acceptor numbers. Kamlet and Taft's -parameter (the hydrogen-bond donation capacity of a solvent) is determined independently by means of salicylideneaniline. The ^* of silica is determined using 5-N,N-dimethylamino-5-nitro-2,2-bithiophene and the complex of tetracyanoethylene with Michlers Ketone, respectively. Further on the reliabilities of the obtained Kamlet-Taft parameters , , and ^* are checked by comparism with experimental and calculated values of theE _T(30)-parameter of silica by means of multi-parameter regression analysis. The surface properties of silica are influenced mainly by HBD-properties (75%) and dipolarity/polarizability ^* (20%), but hardly by the HBA-properties (<5%). UV/VIS-measurements were carried out in a special equipment with glass fiber optics, A drawing of the apparatus is given.     

Die Strommer-Zykliden des Flaggenraumes

According to H. BRAUNER a flag space is a three-dimensional affine space with an absolute {,f,F}, wheref is a line in the plane of infinity andF a point onf. A cyclide is a surface of order 4 that intersects only atf. A STROMMER-cyclide is a cyclide generated by translation of a circle in an isotropic plane. In this paper we proof that all STROMMER-cyclides can be generated by translation of an isotropic circle along a divergent Newton-parabola or a conic in a full isotropic plane. We give normal-forms and CAD-pictures of these surfaces. Finaly some geometrical results about STROMMER-cyclides are developed.

---

---

Herrn o.Prof. Dr. Gy. Strommer zum 70. Geburtstag gewidmet.     

Density fluctuations in amorphous and semicrystalline polymers

Summary The small-angle scattering of amorphous and semicrystalline polymers contains an intensity component due to density fluctuations within the crystalline and amorphous domains.For amorphous polymers, the density fluctuations aboveT _g correspond to the theoretical value for a fluid system in thermodynamic equilibrium. BelowT _g , a temperature dependence proportional to T is observed over a range of about 50°. At lower temperatures, a linear relationship with a smaller slope has been found which extrapolates to a non-zero value at 0 °K. This value corresponds to the frozen-in disorder, the slope at low temperatures is related to thermal vibrations and can be evaluated in terms of photon-phonon scattering.Semicrystalline polymers show a temperature dependence of the density fluctuation similar to that of the amorphous polymers. At constant temperature the density fluctuations vary linearly with crystallinity.Natural rubber shows an increase of the density fluctuations with increasing cross-linking densities from which information on the density changes in the vicinity of a cross-link and on the statistics of the distribution of cross-linking can be obtained.

---

Zusammenfassung Die Kleinwinkelstreuung amorpher und teilkristalliner Polymere besitzt eine Intensitätskomponente, die von Dichtefluktuationen innerhalb der kristallinen und amorphen Bezirke herrührt. Für amorphe Polymere entspricht die Dichtefluktuation oberhalb vonT _g dem theoretischen Wert für ein fluides System im thermodynamischen Gleichgewicht. UnterhalbT _g wird eine Temperaturabhängigkeit proportional zuT über einen Bereich von etwa 50° beobachtet. Bei tieferen Temperaturen wird eine lineare Beziehung mit einer geringeren Steigung gefunden, welche zu einem endlichen Wert bei 0 °K extrapoliert werden kann. Dieser Wert bezieht sich auf die eingefrorene Fehlordnung, die Steigung bei tiefen Temperaturen ist auf thermische Schwingungen zurückzuführen und kann als Photon-Phonon-Streuung ausgewertet werden.Teilkristalline Polymere zeigen eine Temperaturabhängigkeit der Dichtefluktuation, die der von amorphen Polymeren ähnlich ist. Bei konstanter Temperatur ändert sich die Dichtefluktuation linear mit der Kristallinität.Naturkautschuk zeigt eine mit der Vernetzungsdichte ansteigende Dichtefluktuation, aus der man Information über die Dichteänderung in der Umgebung eines Netzpunktes und die Statistik der Netzpunktverteilung erhalten kann.

     

Absolute infrared intensities of hydrocarbons

Dipole-moment derivatives, calculated by both the CNDO/2 method with different parameterizations and the INDO method, are compared to the experimental values determined from absolute infrared intensity measurements for the IR active modes of methane, ethane, ethylene and acetylene. A parameter refinement procedure is introduced in which the CNDO/2 molecular orbital parameters are adjusted through a damped least-squares treatment to give best agreement with the observed dipole-moment derivatives. It is found that the refinement does not substantially improve the agreement obtained with the original CNDO/2 parameterization. The INDO method gives somewhat poorer agreement than the CNDO/2 calculations. As an example of the applicability of the molecular orbital methods toward reproducing relative infrared intensities, the spectrum of cyclopropane in the gasphase is examined.

---

Zusammenfassung Die Ableitungen des Dipol-Moments, die nach der CNDO/2-Methode mit verschiedenen Parametrisierungen sowie der INDO-Methode berechnet wurden, werden mit den experimentellen Ergebnissen aus Messungen der absoluten Infrarot-Intensitäten für die IR-aktiven Schwingungen von Methan, Äthan, Äthylen und Azetylen verglichen. Die CNDO/2-Parameter werden mit einer Methode der kleinsten Quadrate den beobachteten Dipol-Moment-Ableitungen angepaßt. Die Ergebnisse sind jedoch nicht wesentlich von denen der ursprünglichen CNDO/2-Methode verschieden. Die INDO-Ergebnisse sind nicht so gut wie die CNDO/2-Ergebnisse. Als Beispiel der Anwendbarkeit der MO-Methoden zur Berechnung von relativen IR-Intensitäten wird das Spektrum des Cyclopropans in der Gasphase untersucht.

---

Résumé Les dérivées du moment dipolaire, calculées par la méthode CNDO/2 avec différentes paramétrisations et par la méthode INDO, sont comparées aux valeurs expérimentales déterminées à partir de mesures d'intensité absolue pour les modes actifs dans l'infra-rouge dans le méthane, l'éthane, l'éthylène et l'acétylène. Les paramètres sont ajustés de manière à donner le meilleur accord avec les dérivées du moment dipolaire. Cet ajustement n'améliore pas sensiblement l'accord obtenu avec la paramétrisation CNDO/2 originale. La méthode INDO donne des résultats moins bons que les calculs CNDO/2. Le spectre du cyclopropane en phase gazeuse est étudié comme exemple de l'applicabilité de la méthode des orbitales moléculaires au calcul des intensités relatives infra-rouge.

     

Effects of simultaneously doped and deposited Ag on the photocatalytic activity and surface states of TiO2

Ag-TiO2 catalysts with different Ag contents were prepared via a sol-gel method in the absence of light. Based on the characterizations of XRD, photoluminescence (PL), surface photovoltage spectroscopy (SPS), field-induced surface photovoltage spectroscopy (FISPS), and XPS as well as the evaluation of the photocatalytic activity for degrading rhodamine B(RhB) solutions, it was found that the Ag dopant promoted the phase transformation as well as had an inhibition effect on the growth of anatase crystallite. The PL and SPS intensities were decreased with increasing Ag content, indicating that the Ag dopant could effectively inhibit the recombination of the photoinduced electrons and holes. However, the active sites capturing the photoinduced electrons reduced, while the Ag content exceeded 5 mol %. At rather low Ag dopant concentrations, the migration and diffusion of Ag+ ions were predominant, while at rather high Ag dopant concentrations, the migration, diffusion, and reduction of Ag ions simultaneously occurred. The Ag-TiO2 photocatalysts with appropriate content of Ag (Ag species concentration is from about 3 to 5 mol %) possessed abundant electron traps so as to be favorable for the separation of the photoinduced electron-hole pairs, which could greatly enhance the activity of the photocatalysts. From the results of FISPS measurements, it could be found that the impurity bands and abundant surface states were introduced into the interfacial layer of TiO2 because of Ag simultaneously doping and depositing, which could improve the absorption capability for visible light of the photocatalysts.