Non-linear modeling and dynamic analysis of hydraulic control valve; effect of a decision factor between experiment and numerical simulation

Numerical problems that are usually ignored in the dynamic analysis of hydraulic control valves are described, and an analysis of the effects of such problems on the numerical modeling is provided. Previous studies have ignored the effects of changes in the flow coefficient in the orifice, the solenoid force along the spool movement in the valve and an ascending tendency of pressure during reach to the steady state. To eliminate these problems, it was studied a method to substantiate the non-linearity of the pressure loss caused by passing between the orifice and port as well as that caused by interaction with the solenoid. Moreover, the movement of the spool and spring is expressed using the time-delay-element (TDE). The proposed numerical model has been used in the Bond graphs method of a hydraulic control valve and the simulation results have been shown to be accurate. It is known that differences between simulated and experimental results can have a considerable impact on the function of actual systems. The contribution of each parameter is measured separately for the transient state and steady state. Analysis standard observed the first peak value, pressure increase to the steady state and the settling time in the response results.     

Circuit analysis of the compound quasi-optical power combiner

In 1991, we developed a new type of quasi-optical power combiner, called a compound quasi-optical power combiner, at Ka-band. In this paper, the circuit of such a compound quasi-optical power combiner is analysed. Its equivalent circuit model is proposed. The circuit equations, the balance condition, the injection locking and the stabilized condition of the compound quasi-optical power combiner are studed by the equivalent circuit model. As an example, a compound quasi-optical power combiner which consists of two single—cavity, two—device power combiners is analysed     

北京自由电子激光最近进展──实现饱和振荡

北京自由电子激光(BFEL)装置于1993年底在10.68μm处实现了饱和振荡.输出激光能量为3mJ,饱和平顶宽度2μs.对应饱和振荡平均功率为210kW(宏脉冲),峰值功率约为20MW,比自发辐射高8个量级,单程小讯号净增益为24%,转换效率为0.45%,与理论预期结果相符.光束质量接近衍射极限.目前装置可工作于9-11μm.     

Cd3Al2Ge3O12:Mn2+锗酸盐石榴石光谱性质

本文报道室温下Cd₃Al₂Ge₃O₁₂:Mn²⁺(简称CAGG:Mn²⁺)锗酸盐石榴石的漫反射光谱、激发和发射光谱.在UV光激发下,在CAGG中Mn²⁺离子发射强黄光,这是基质到Mn²⁺离子无辐射能量传递的结果.Mn²⁺的黄发射带是由一个弱的红带和一个强的绿带所组成.讨论了这两个Mn²⁺发射带的起因.     

高斯光束在任意分布的径向梯度折射率介质中传输的计算方法

根据弱波导近似,本文建立了处理高斯光束在任意分布的径向梯度折射率介质中传输的计算方法,并具体计算和讨论了高斯光束腰斑在沿径向呈抛物型分布的介质中随传输距离的变化情况,其数值结果与解析近似符合。