Dispersion state of CuO on CeO2

XRD and XPS are used to study the dispersion state of CuO on ceria surface. The dispersion capacity values of CuO measured by the two methods are consistent, which are of 1.20 mmol CuO/100 m² CeO₂. In addition, the results reveal that highly dispersed Cu²⁺ ions are formed at low CuO loadings and that increasing the CuO content to a value higher than its dispersion capacity produces crystalline CuO after the surface vacant sites on CeO₂ are filled. The atomic composition of the outermost layer of the CuO/CeO₂ samples has been probed by using static secondary ion mass spectroscopy (SSIMS), and the ratim of Cu/Ce are found to be 0.93 and 0.46 for the 1.22 and 0.61 mmol CuO/CeO₂ samples respectively. Temperature-programmed reduction (TPR) profile with two reduction peaks at 156 and 165°C suggests that the reduction of highly dispersed Cu²⁺ ions consists of two steps and is easier than that of CuO crystallites, in which the TPR profile has only one reduction peak at about 249°C. The above experimental results are in good agreement with the prediction of the incorporation model. Project supported by the National Natural Science Foundation of China.     

6β-Acetoxy-7 α-Hydroxyroyleanone,A New Compound from Taiwania Cryptomerioides Hayata

Two crystalline compounds from the bark of Taiwania cryptomerioides Hayata were isolated. One of them was identified as 6,7-dehydroroyleanone and the other was shown to be a new derivative of royleanone having a structure of 6β-acetoxy-7α-hydroxyroyleanone.     

Reactions of hydrazoic acid on TiO2 nanoparticles: an experimental and computational study

This article reports the results of a computational and experimental study on the reaction of hydrazoic acid, HN3, adsorbed on 15-20 nm TiO2 particle films. Experimentally, FTIR spectra of HN3(a) have been measured by varying HN3 dosage, UV irradiation time and surface annealing temperature. Three sharp peaks, related to v(a)(NNN) of HN3(a) and N3(a) with different configurations in the 2000-2200 cm(-1) region, and a broad band absorption, related to associated and isolated HN(a) and HO(a) adsorptions in the 3000-3800 cm(-1) region, have been detected. Computationally, molecular structures, vibrational frequencies and adsorption energies of possible adsorbates including HN3 and its derivatives, N3, N2, NH, and H, have been predicted by first-principles calculations based on the density functional theory (DFT) and the pseudopotential method. On the basis of the experimental and computational results, the peak appeared at 2075 cm(-1), which increases at a faster rate with HN3 exposure time, is attributed to a stable adsorbate, N3-Ti(a), with the predicted adsorption energy, E(ads) = 13 kcal/mol. The peak at 2118 cm(-1), which survives at the highest surface temperature in the heating experiment, is attributable to the most stable adsorbate, Ti-N2N(H)-O(a) with E(ads) = 36 kcal/mol. The peak at 2170 cm(-1), which vanishes most readily in all of the aforementioned experiments, is related to less stable molecular adsorbates, end-on HN3-Ti(a) with E(ads) = 5 kcal/mol and side-on HN(N2)-Ti(a) with E(ads) = 8 kcal/mol. A potential energy diagram for the formation of various absorbates with their transition states has been established for the HN3/TiO2 system. On the basis of the predicted desorption energies, the four most stable products of the HN3 reaction on TiO2 are H-O(a), 118 kcal/mol; HN-O(a), 85 kcal/mol; Ti-N2N(H)-O(a), 36 kcal/mol; and N3-O(a), 19 kcal/mol.     

Study on osmotic pressures for aqueous lysozyme and alpha-chymotrypsin-electrolyte solutions with two Yukawa potentials

The equation of state (EOS) of Duh and Mier-y-Terán for one Yukawa potential is expanded to two Yukawa potentials to describe the nonidealities of the charged lysozyme and alpha-chymotrypsin solutions. Instead of the classical DLVO theory, the attractive dispersion and double-layer repulsion interactions are represented by two Yukawa potentials, respectively. For the aqueous lysozyme solutions, the only adjustable dispersion energy parameter epsilon/k is regressed and the average deviation is 1.76%. For the aqueous alpha-chymotrypsin solutions, two adjustable parameters (the molecular weight and dispersion energy parameter) are regressed and the average deviation is 7.62%. Some correlation and prediction results are discussed.     

An immune algorithm for resolution of multicomponent overlapping chromatograms

A novel immune algorithm for resolution and quantitative determination of the components in overlapping chromatograms was proposed by imitating biological immune systems. The algorithm takes an overlapping chromatogram as its input and subtracts the chromatograms of standard samples from the input by iteration of a network. When the residual does not change, the network will converge and chromatographic information of the components in overlapping chromatogram will be obtained. Both simulated and experimental data sets were investigated by the method. Results showed that both resolved results and recoveries of quantitative determination are satisfactory. Comparing with conventional least-square method, the immune algorithm is fast in calculation.     

IR, MS studies on (+/-)-1-[3-(2-methoxyphenoxy)-2-hydroxypropyl]-4-[(2,6-dimethylphenyl)aminocarbonylmethyl]piperazine dihydrochloride salt

The vibration spectrum and FAB mass spectrum of (+/-)-1-[3-(2-methoxyphenoxy)-2-hydroxypropyl]-4-[(2,6-dimethylphenyl)aminocarbonylmethyl]piperazine dihydrochloride salt was studied. By comparing with the spectra of free base, different bands of IR were found in the NH+ stretching, the NH+ deformation motion, the CH2 of NCH2 group symmetric stretching, the CH2 of N-CH2 group twisting and the CN stretching. FAB shows the basic peak is M + H. Other m/e peaks are consistent with the structure.     

The Mitsunobu Reaction: Origin,Mechanism, Improvements,and Applications

The Mitsunobu reaction is a widely used and versatile method for the dehydrative oxidation–reduction condensation of an acid/pronucleophile usually with a primary or secondary alcohol that requires the combination of a reducing phosphine reagent together with an oxidizing azo reagent. The utility of this reaction stems from the fact that it is generally highly stereoselective and occurs with inversion of the stereochemical configuration of the alcohol starting material. Furthermore, as carboxylic acids, phenols, imides, sulfonamides, and other compounds can be used as the acid/pronucleophile, this reaction is useful for the preparation of a wide variety of functional groups. This Focus Review of the Mitsunobu reaction summarizes its origins, the current understanding of its mechanism, and recent improvements and applications.     

Block copolymer from α,ω-dihydroxyl polystyrene and polyethylene glycol

α,ω-Dihydroxyl polystyrene was synthesized by the addition of styrene oxide to polystyryl dianion initiated with sodium naphthalene. Diglyme was found to be an unsuitable solvent for the preparation of low molecular weight compounds. Block copolymerization of the α,ω-dihydroxyl polystyrenes (M?_n = 2250, 3140, and 6200) with poly(ethylene glycols) (M?_n = 404, 1960, and 5650) was pursued by introducing urethane linkages with 4,4′-diphenylmethane diisocyanate. The mechanical, thermal, and viscoelastic properties, solution viscosity, molecular weight distribution, and moisture absorption of the block copolymers obtained were examined. Incorporation of styrene blocks was found to disturb the crystallization and fusion of poly(ethylene glycol) blocks. Films cast from benzene solution were soft and elastic and absorbed up to 5.8% moisture.     

Different reaction routes found in acid-catalyzed glycosylation of endo- and exo-glycals: competition between Ferrier rearrangement and protonation

Acid-mediated glycosylations of endo- and exo-glycals have been carried out in good to excellent yields, in which a mixture of two products is often obtained resulting from Ferrier rearrangement and protonation. The former reaction exclusively takes place with the t-butyl carbonate or hydroxyl substituent at the C3 position of endo-glycals, while the latter mainly occurs in the glycosylation of exo-glycals with allyl benzyl ether or acetate. In addition to the substituent effect, protecting groups are critical to determine the activity and favored reaction pathway. Furthermore, the method is applicable to O-, C-, and N-nucleophiles.     

Electron Paramagnetic Resonance Study of Radical Pairs and Isolated Radicals Trapped in Irradiated Long-Chain Hydrocarbons at Low Temperatures

The intrinsic characteristics of radical pairs produced in squalane and in cetane receiving high gamma-dose are extensively studied with the EPR technique at temperatures from 77°K up to 150°K. The spectra of the paired radicals occur at g=4 with a very low transition probability in contrast to that of isolated radicals which appear at g=2 A well-resolved hyperfine spectrum corresponding to the species (CH₃CH₂.CH₂CH₃) is observed in cetane. The isothermal decay rates of radical pairs in cetane below 100°K are significantly slow; however, the decay kinetics at 150°K is first order with rate constant=1.86 min^?1. A relatively slower decay rate is obtained for isolated radicals suggesting that the decay mechanism of paired radicals is through geminate recombination. The relative inter-radical distance in radical pairs is known from a decay curve as a function of temperature. The yields of radical pairs are low in both matrices, only few percents of those of isolated radicals. The formation mechanisms of paired radicals with direct radiolytic bond scission process are discussed in connection with the experimental observations.