An Integrated Microfluidic Probe for Mass Spectrometry Imaging of Biological Samples**

Ambient ionization based on liquid extraction is widely used in mass spectrometry imaging (MSI) of molecules in biological samples. The development of nanospray desorption electrospray ionization (nano-DESI) has enabled the robust imaging of tissue sections with high spatial resolution. However, the fabrication of the nano-DESI probe is challenging, which limits its dissemination to the broader scientific community. Herein, we describe the design and performance of an integrated microfluidic probe (iMFP) for nano-DESI MSI. The glass iMFP, fabricated using photolithography, wet etching, and polishing, shows comparable performance to the capillary-based nano-DESI MSI in terms of stability and sensitivity; a spatial resolution of better than 25 μm was obtained in these first proof-of-principle experiments. The iMFP is easy to operate and align in front of a mass spectrometer, which will facilitate broader use of liquid-extraction-based MSI in biological research, drug discovery, and clinical studies.     

Accelerating Electrochemical Reactions in a Voltage-Controlled Interfacial Microreactor

Microdroplet chemistry is attracting increasing attention for accelerated reactions at the solution–air interface. We report herein a voltage-controlled interfacial microreactor that enables acceleration of electrochemical reactions which are not observed in bulk or conventional electrochemical cells. The microreactor is formed at the interface of the Taylor cone in an electrospray emitter with a large orifice, thus allowing continuous contact of the electrode and the reactants at/near the interface. As a proof-of-concept, electrooxidative C−H/N−H coupling and electrooxidation of benzyl alcohol were shown to be accelerated by more than an order of magnitude as compared to the corresponding bulk reactions. The new electrochemical microreactor has unique features that allow i) voltage-controlled acceleration of electrochemical reactions by voltage-dependent formation of the interfacial microreactor; ii) “reversible” electrochemical derivatization; and iii) in situ mechanistic study and capture of key radical intermediates when coupled with mass spectrometry.     

High-Capacity and Stable Li-O2 Batteries Enabled by a Trifunctional Soluble Redox Mediator

Li-O₂ batteries with ultrahigh theoretical energy densities usually suffer from low practical discharge capacities and inferior cycling stability owing to the cathode passivation caused by insulating discharge products and by-products. Here, a trifunctional ether-based redox mediator, 2,5-di-tert-butyl-1,4-dimethoxybenzene (DBDMB), is introduced into the electrolyte to capture reactive O₂⁻ and alleviate the rigorous oxidative environment of Li-O₂ batteries. Thanks to the strong solvation effect of DBDMB towards Li⁺ and O₂⁻, it not only reduces the formation of by-products (a high Li₂O₂ yield of 96.6 %), but also promotes the solution growth of large-sized Li₂O₂ particles, avoiding the passivation of cathode as well as enabling a large discharge capacity. Moreover, DBDMB makes the oxidization of Li₂O₂ and the decomposition of main by-products (Li₂CO₃ and LiOH) proceed in a highly effective manner, prolonging the stability of Li-O₂ batteries (243 cycles at 1000 mAh g⁻¹ and 1000 mA g⁻¹).     

Supramolecular Catalysis of the oxa-Pictet–Spengler Reaction with an Endohedrally Functionalized Self-Assembled Cage Complex

An endohedrally functionalized self-assembled Fe₄L₆ cage complex can catalyze oxa-Pictet—Spengler cyclizations of tryptophols and various aldehyde derivatives, showing strong rate accelerations and size-selectivity. Selective molecular recognition of substrates controls the reactivity, and the cage is capable of binding and activating multiple different species along the multistep reaction pathway. The combination of a functionalized active site, size-selective reactivity, and multistep activation, all from a single host molecule, illustrates the biomimetic nature of the catalysis.     

Atropisomers of meso Tetra(N-Mesyl Pyrrol-2-yl) Porphyrins: Synthesis,Isolation and Characterization of All-Pyrrolic Porphyrins

Atropisomerism has been observed in a variety of biaryl compounds and meso-aryl substituted porphyrins. However, in porphyrins, this phenomenon had been shown only with o-substituted 6-membered aromatic groups at the meso-position. We show herein that a 5-membered heteroaromatic (N-mesyl-pyrrol-2-yl) group at the meso-position leads to atropisomerism. In addition, we report a ‘one-pot’ synthetic route for the synthesis of ‘all-pyrrolic’ porphyrin (APP) with several N-protection groups (Boc, Cbz, Ms and Ts). Among these groups, we found that only the Ms group gave four individually separable atropisomers of meso-tetra(N-Ms-pyrrol-2-yl) porphyrin. Furthermore, the reductive removal of Cbz- was achieved to obtain meso-tetra(pyrrol-2-yl) porphyrin. Thus, our synthetic procedure provides an easy access to a group of APPs and stable atropisomers, which is expected to expand the application of novel APP-based materials.     

Ring Enlargement of Three-Membered Heterocycles by Treatment with In Situ Formed Tricyanomethane

Although the chemistry of elusive tricyanomethane (cyanoform) has been studied during a period of more than 150 years, this compound has very rarely been utilized in the synthesis or modification of heterocycles. Three-membered heterocycles, such as epoxides, thiirane, aziridines, or 2H-azirines, are now treated with tricyanomethane, which is generated in situ by heating azidomethylidene-malonodinitrile in tetrahydrofuran at 45 °C or by adding sulfuric acid to potassium tricyanomethanide. This leads to ring expansion with formation of 2-(dicyanomethylidene)oxazolidine derivatives or creation of the corresponding thiazolidine, imidazolidine, or imidazoline compounds and opens up a new access to these push–pull-substituted olefinic products. The regio- and stereochemistry of the ring-enlargement processes are discussed, and the proposed reaction mechanisms were confirmed by using ¹⁵N-labeled substrates. It turns out that different mechanisms are operating; however, tricyanomethanide is always acting as a nitrogen-centered nucleophile, which is quite unusual if compared to other reactions of this species.     

Sensor Array Based Determination of Edman Degradated Amino Acids Using Poly(p-phenyleneethynylene)s

A cross-reactive optical sensor array based on poly(p-phenyleneethynylene)s (PPEs) determines Edman degraded amino acids. We report a sensor array composed of three anionic PPEs P1–P3 , and their electrostatic complexes with metal ions (Fe²⁺, Cu²⁺, Co²⁺). We recorded distinct fluorescence intensity response patterns as “fingerprints” of this chemical tongue toward standard phenylthiohydantoin (PTH) amino acids—degradation products of the Edman process. These “fingerprints” were converted into canonical scores by linear discrimination analysis (LDA), which differentiates all of the PTH-amino acids. This array discriminates PTH-amino acid residues degraded from an oligopeptide through Edman sequencing. This approach is complementary to chromatography approaches which rely on mass spectrometry; our array offers the advantage of simplicity.     

Visible Light-Gated Organocatalysis Using a RuII-Photocage

The light-gated organocatalysis via the release of 4-N,N-dimethylaminopyridine (DMAP) by irradiation of the [Ru(bpy)₂(DMAP)₂]²⁺ complex with visible light was investigated. As model reaction the acetylation of benzyl alcohols with acetic anhydride was chosen. The pre-catalyst releases one DMAP molecule on irradiation at wavelengths longer than 455 nm. The photochemical process was characterized by steady-state irradiation and ultrafast transient absorption spectroscopy. The latter enabled the observation of the ³MLCT state and the spectral features of the penta-coordinated intermediate [Ru(bpy)₂(DMAP)]²⁺. The released DMAP catalyzes the acetylation of a wide range of benzyl alcohols with chemical yields of up to 99 %. Control experiments revealed unequivocally that it is the released DMAP which takes the role of the catalyst.     

Metal-Free Twofold Electrochemical C−H Amination of Activated Arenes: Application to Medicinally Relevant Precursor Synthesis

The efficient production of many medicinally or synthetically important starting materials suffers from wasteful or toxic precursors for the synthesis. In particular, the aromatic non-protected primary amine function represents a versatile synthetic precursor, but its synthesis typically requires toxic oxidizing agents and transition metal catalysts. The twofold electrochemical amination of activated benzene derivatives via Zincke intermediates provides an alternative sustainable strategy for the formation of new C−N bonds of high synthetic value. As a proof of concept, we use our approach to generate a benzoxazinone scaffold that gained attention as a starting structure against castrate-resistant prostate cancer. Further improvement of the structure led to significantly increased cancer cell line toxicity. Thus, exploiting environmentally benign electrooxidation, we present a new versatile and powerful method based on direct C−H activation that is applicable for example the production of medicinally relevant compounds.     

Chemical-Synthesis-Based Approach to Glycoprotein Functions in the Endoplasmic Reticulum

The introduction of Asn-linked glycans to nascent polypeptides occurs in the lumen of the endoplasmic reticulum of eukaryotic cells. After the removal of specific sugar residues, glycoproteins acquire signals in the glycoprotein quality control (GPQC) system and enter the folding cycle composed of lectin-chaperones calnexin (CNX) and calreticulin (CRT), glucosidase II (G-II), and UDP-Glc:glycoprotein glucosyltransferase (UGGT). G-II initiates glycoproteins’ entry and exit from the cycle, and UGGT serves as the “folding sensor”. This account summarizes our effort to analyze the properties of enzymes and lectins that play important roles in GPQC, especially those involved in the CNX/CRT cycle. To commence our study, general methods for the synthesis of high-mannose-type glycans and glycoproteins were established. Based on these, various substrates to analyze components of the GPQC were created, and properties of CRT, G-II, and UGGT have been clarified.