单原子Al修饰空位缺陷V2C（MXene）对H2气体表面吸附的第一性原理研究

基于第一性原理计算方法,对含空位缺陷的V₂C(MXene)在不同位点修饰单原子Al的相关性能进行系统研究.研究表明,几何优化后得到含空位缺陷的V₂C稳定结构表面能为-3075.53 J/m²,单原子Al修饰本征V₂C单原子的吸附能为1.5511eV、单原子Al修饰空位缺陷V₂C的吸附能为-2.0763 eV,这表明含空位缺陷的V₂C,由于单原子Al的修饰可以明显改善晶体结构稳定性.进一步从态密度、分波态密度、吸氢能力研究发现,各体系态密度和分波态密度均出现分波越过费米能级的现象,表现出较强的金属性;V₂C吸附H₂气体分子吸附能为-7.5867 eV,而空位缺陷V₂C和单原子Al修饰空位缺陷V₂C两个体系对H₂气体分子的吸附能仅为-0.9851 eV、-2.7130 eV,均未能进一步改善V₂C对H₂气体分...     

An Edge Server Placement Method Based on Reinforcement Learning

In mobile edge computing systems, the edge server placement problem is mainly tackled as a multi-objective optimization problem and solved with mixed integer programming, heuristic or meta-heuristic algorithms, etc. These methods, however, have profound defect implications such as poor scalability, local optimal solutions, and parameter tuning difficulties. To overcome these defects, we propose a novel edge server placement algorithm based on deep q-network and reinforcement learning, dubbed DQN-ESPA, which can achieve optimal placements without relying on previous placement experience. In DQN-ESPA, the edge server placement problem is modeled as a Markov decision process, which is formalized with the state space, action space and reward function, and it is subsequently solved using a reinforcement learning algorithm. Experimental results using real datasets from Shanghai Telecom show that DQN-ESPA outperforms state-of-the-art algorithms such as simulated annealing placement algorithm (SAPA), Top-K placement algorithm (TKPA), K-Means placement algorithm (KMPA), and random placement algorithm (RPA). In particular, with a comprehensive consideration of access delay and workload balance, DQN-ESPA achieves up to 13.40% and 15.54% better placement performance for 100 and 300 edge servers respectively.     

D形光纤Bragg光栅弯曲灵敏度的理论和实验研究

用材料力学理论分析了D形光纤Bragg光栅（D-shaped fiber Bragg grating,D-FBG）以及常规光纤Bragg光栅由弯曲引起的轴向应变,得到了光栅Bragg波长漂移的弯曲敏感特性.实验结果和理论计算结果基本相符.与常规FBG相比,该D-FBG的弯曲灵敏度要高近80倍.因此D-FBG可以直接应用于弯曲形变的测量,以及间接应用于压力、加速度等物理量的测量.理论分析和实验结果对采用该类型光纤光栅的器件和传感系统的设计具有参考意义.     

应力对M-Z型InP/InGaAsP-EAM偏振

采用Agilent 81910A光子全参量测试仪,首次实验研究了InP/In1－xGaxAs1－yPy-MQW（Multiple-Quantum-Well,MQW）材料与衬底间因应力而产生的M-Z型光调制器的PDL影响以及由此引起的由差分群时延(Differential Group Delay,DGD)表征的偏振模色散(Polarization Mode Dispersion,PMD).研究结果表明,半导体MQW光调制器的PDL与DGD是一致的.因此在半导体光器件的制作过程中,应尽可能地减小衬底与波导芯层之间的因残存应力的存在造成对光器件的高速性能的不利影响.     

气相传输平衡法在(11-20)面蓝宝石上制备γ铝酸锂膜

为了寻找可能替代蓝宝石作为氮化镓外延的新型衬底,通过48 h的气相传输平衡,分别在1000℃、1030℃、1050℃、1070℃和1100℃制备了一层单相多晶的γ铝酸锂膜。X射线衍射和扫描电镜分别用于表征膜的物相、取向和表面形貌。结果显示,γ铝酸锂择优取向的好坏取决于气相平衡传输温度,在1050℃制备的γ铝酸锂具有高度的[100]择优取向;在γ铝酸锂(001)面上的双轴拉应力可能有助于[100]择优取向的形成;γ铝酸锂晶粒表面裂纹的方向一致性与其择优取向紧密相关。上述结果表明在合适的工艺条件下,气相传输平衡法制备的γ铝酸锂/蓝宝石可能成为一种很有前景且适合(1-100)面氮化镓生长的复合衬底。     

气相传输平衡技术制备LiGaO2薄膜

为获得与GaN薄膜晶格失配小的衬底材料,报道了利用气相传输平衡技术(VTE)在(100)-βGa2O3单晶衬底上制备高度[001]取向LiGaO2薄膜的方法。经过X射线衍射分析表明得到的薄膜是由单相LiGaO2组成。利用扫描电镜(SEM)观察表面形貌,发现经气相传输平衡技术处理得到的薄膜表面形貌主要受温度的影响,表面晶粒尺寸随温度上升而增大。而X射线衍射测试表明随着温度上升,所得到的薄膜也从多晶向单晶化转变。在经过退火处理后,通过观察吸收谱发现LiGaO2薄膜中产生色心,并且色心的种类与温度有关。表明可以通过气相传输平衡技术技术,在远低于LiGaO2熔点的温度制备外延GaN用(001)LiGaO2∥(100)β-Ga2O3复合衬底。     

Influence of Co–Zr substitution on coercivity in Ba ferrites

Polycrystalline BaCo_xZr_xFe_11.5−2xO_18.25 samples with 0?x?0.6$0?x?0.6$ ions per formula units were prepared by modified citrate precursor method with the initial ratio of Ba:Fe equal to 1:11.5. The cationic site preferences of Co²⁺ and Zr⁴⁺ in Co–Zr substituted Ba ferrite were investigated by magnetic measurements and X-ray diffractometer (XRD) analysis. The coercivity H_c was decreasing with increasing Co–Zr substitution. The datum showed that the max coercive force (H_c) was obtained when substitution of 0.2, while the best saturation magnetizations (M_s) was obtained when substitution of 0.4.     

光纤激光阵列目标在回路自适应光学系统的数值模拟

研究了光纤激光阵列目标在回路自适应光学系统在实际大气环境中的传输.从光纤激光阵列、激光在大气中的传输、目标和优化算法四个方面,建立了光纤激光阵列目标在回路自适应光学系统的理论模型.在不同强度大气湍流下,对系统补偿大气湍流影响的效果进行了研究,并对系统控制参数优化进行了简单探讨.结果表明,目标在回路闭环控制结构能够有效补...     

扰动Nizhnik-Novikov-Veselov系统分形孤子渐近解

文章研究了一类扰动Nizhnik-Novikov-Veselov非线性系统, 利用特殊的渐近方法得到了相应系统分形孤子渐近解. 关键词： 孤子 渐近解 扰动     

Efficient and wavelength-tunable anti-Stokes frequency conversion with good beam quality in the fundamental mode of photonic crystal fiber

Using the photonic crystal fiber (PCF) with the zero dispersion wavelength of 848 nm for the fundamental mode, the efficient anti-Stokes signal generations from 645 to 543 nm are realized by pumping in the normal dispersion region. When the pump average power increases from 200 to 500 mW, the output power of the anti-Stokes signal increases 8.46 times, the power ratio of the anti-Stokes signal at 543 nm to the residual pump is calculated as 22.6:1, and the conversion efficiency η in the experiment can be up to 46%. Moreover, good optical beam quality of the anti-Stokes signal can be achieved.