Flexural contact in MEMS stiction

Adhesive force between two solid surfaces can lead to stiction failure of the micro-electro-mechanical systems (MEMS) device. The competition between the adhesive force and the beam restoring force determines whether the stiction occurs or not. Previous models assume that the stuck beam deforms either as the arc-shape or the S-shape, which causes significant differences in the measurements of adhesion and disputations among researchers. The contact mechanics model presented in this paper shows that the assumptions of the arc-shape and S-shape on the beam deformation over-simplify the problem; both the arc-shaped deformation and S-shaped deformation significantly deviate from the real ones. The previous theories are shown to be incompatible with the recent experimental results. The model presented in this paper attempts to explain those new experimental results and resolve some disputations on the previous models. The instabilities of jump-in during loading process and jump-off during unloading process are also incorporated in this model.     

Pore Structure Analysis of Porous Particles by Equivalent Model

Starting from Wheeler's composite theory, which takes both the multilayer adsorption and the capillary condensation into consideration, and assuming the equivalent cylindrical model, we have deduced a strict and relatively simpler formula for the calculation of pore size distribution by solving the integral equation directly. The formula is more convenient for application because of its recursion form. Following the same line of reasoning and using the mean value theorem of definite integrals under different conditions, we have unified the equations of Barrett-Joyner-Halenda, Dubinin, Cranston-Inkley, Dollimore-Heal and Roberts. A table of parameters which is required in the calculation is given. Besides the adsorption of nitrogen, the adsorption with water vapor as the adsorbate is investigated and the corresponding empirical equation of adsorption thickness is given.     

电光晶体补偿位相测量微小位移及其应用

介绍一种应用电光晶体补偿位相测量微小位移的方法,着重分析其测量精度,并应用这种方法校正压电陶瓷的线性,精度优于1%波长。     

Multi-color display and its model for a white OLED combined with optical color filters

A bright white organic light-emitting diode (OLED) has been successfully fabricated in which a greenish-white emitting host Bis-(2-(2-hydroxyphenyl) benzothiazole)zinc (Zn(BTZ)₂) is doped with an orange-red fluorescent dye 5,6,11,12-tetraphenylnaphthacene (rubrene). The pure white light emission with CIE coordinates of (0.341, 0.334) is achieved at the driving voltage of 20 V, and the corresponding luminance and external quantum efficiency are 4000 Cd/m² and 0.63%. On the other hand, the pure red, green, and blue (RGB) emissions are obtained from the white OLED combined well with RGB custom-built optical color filters (CFs) with peaks at 616, 556, and 456 nm, respectively. Moreover, based upon the color mixture principles, we build a model of multi-color display mixed by the pure RGB emissions under the controllable bias.     

Preparation of BA/ST/AM nano particles by ultrasonic emulsifier-free emulsion polymerization

A kind of nano particle of butyl acrylate (BA)/styrene (ST)/acrylamide (AM) was prepared through a new method that was ultrasonic emulsifier-free emulsion polymerization, which was a kind of environmental protection and economical method. And no any volatile organic solvent (VOC), emulsifier and initiator were used in this method. Only water was used as solvent. The effects of sonic intensity, sonic time, inorganic salt content, N2 flow velocity, etc. on monomer conversion were studied. TEM photographs showed that its particles size was about 80 nm, which was less than particles size (about 140 nm) through conventional emulsifier-free emulsion polymerization method. The FTIR spectrum showed that after extracted by water for 48 h, CHCl3 for 48 h and THF for 48 hr, respectively, the sample obtained by this way was a ternary copolymer of BA, ST and AM, but not a blend of poly(butyl acrylate), polystyrene and polyacrylamide.     

Controlling the surface buckling wrinkles by patterning the material system of hard-nano-film/soft-matter-substrate

Wrinkling and buckling of nano-films on the compliant substrate are always induced due to thermal deformation mismatch.This paper proposes effective means to control the surface wrinkling of thin film on the compliant substrate,which exploits the curvatures of the curve cracks designed on the stiff film.The procedures of the method are summarized as:1)curve patterns are fabricated on the surface of PDMS(Polydimethylsiloxane)substrate and then the aluminum film with the thickness of several hundred nano-meters is deposited on the substrate;2)the curve patterns are transferred onto the aluminum film and lead to cracking of the film along the curves.The cracking redistributes the stress in the compressed film on the substrate;3)on the concave side of the curve,the wrinkling of the film surface is suppressed to be identified as shielding effect and on the convex side the wrinkling of the film surface is induced to be identified as inductive effect.The shielding and inductive effects make the dis-ordered wrinkling and buckling controllable.This phenomenon provides a potential application in the fabrication of flexible electronic devices.     

模拟回火马尔可夫链蒙特卡罗全波形分析方法

针对传统的全波形分析方法不能快速自动处理全波形数据的缺点,提出了一种模拟回火马尔可夫链蒙特卡罗全波形分析法,用于求解全波形数据中的波峰数和峰值位置等参量.该方法采用Metropolis更新策略求解波峰数量和噪声两个参量,以达到快速求解的目的;而峰值位置和波峰幅值则采用改进的模拟回火策略求解,通过添加的主动干预回火步骤实现对参量更新过程的有效探测,以满足对速度或运算收敛性的要求.模拟回火马尔可夫链蒙特卡罗全波形分析方法以马尔可夫算法为基础,仍保持马氏链的收敛性,从而保证本方法具有良好的鲁棒性,实现对全波形数据的自动化处理.