MEASUREMENTS OF Fe AND Cu K-Shell IONIZATION CROSS SECTIONS BY SLOW ELECTRON IMPACT

ＭＥＡＳＵＲＥＭＥＮＴＳＯＦＦｅＡＮＤＣｕＫ－ＳｈｅｌＩＯＮＩＺＡＴＩＯＮＣＲＯＳＳＳＥＣＴＩＯＮＳＢＹＳＬＯＷＥＬＥＣＴＲＯＮＩＭＰＡＣＴＬｉＴａｉｈｕａＡｎＺｈｕＬｕｏＺｈｅｎｇｍｉｎｇＣｅｎｔｅｒｆｏｒＲａｄｉａｔｉｏｎＰｈｙｓｉｃｓ，Ｉｎｓ...     

Measurement of small-signal and large-signal responses of packaged laser modules at high temperature

In this paper, the pulsed injection method is extended to measure the chip temperature of various packaged laser modules, such as the DFB laser modules, the FP laser modules, and the EML laser modules. An optimal injection condition is obtained by investigating the dependence of the lasing wavelength on the width and period of the injection pulse in a relatively wide temperature range. The small-signal frequency responses and large-signal performances of packaged laser modules at different chip temperature are measured. The adiabatic small-signal modulation characteristics of packaged LD are first extracted. In the large-signal measurement, the effects of chip temperature, bias current and driving signal on the performances of the laser modules are discussed. It has been found that the large-signal performances of the EML modules depend on the different red-shift speeds of the DFB and EAM sections as chip temperature varying, and the optimal characteristics may be achieved at higher temperature.     

Preparation and characterization of optically active polystyrene via a chiral nitroxide‐mediated polymerization

2,2,6,6‐Tetramethyl‐4‐[d‐(+)‐10‐camphorsulfonyl]‐1‐piperidinyloxy was synthesized and used as a chiral nitroxide for the bulk polymerizations of styrene initiated with benzoyl peroxide (BPO), tetraethylthiuram disulfide (TETD), and thermal initiation. The results showed that the polymerizations proceeded in a controlled/living way; that is, the kinetics presented approximately first‐order plots, and the number‐average molecular weights of the polymers with narrow molecular weight distributions (weight‐average molecular weight/number‐average molecular weight) increased with the monomer conversion linearly. The molecular weight distributions in the case of thermal initiation were narrower than those in the case of BPO and TETD, whereas the polymerization rate with BPO or TETD as an initiator was obviously faster than that with thermal initiation. In addition, successful chain‐extension reactions were carried out, and the structures of the obtained polymers were characterized by gel permeation chromatography and ¹H NMR. The specific rotations of the polymers were also measured by polarimetric analysis. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1522–1528, 2006     

半导体激光泵浦预激光锁模调Q固体激光器研究

报道半导体激光侧面泵浦预激光锁模调Ｑ的Ｎｄ：ＹＡＧ固体板条激光器，预激光锁模调Ｑ的激光脉冲宽度为３６ｐｓ，调Ｑ包纤各心的锁模单脉冲能量超过７μＪ，相应的峰值功率达２００ｋＷ。     

Riemannian geometry of strong-laser plasma

The optical metric for a strong-laser plasma is derived. The affine connection and curvature related to the optical metric are given and their spatial distributions are studied numerically.     

The convergence rate of Euler means sequence

Let denote the Euler means of the Fourier series of the 2π-perodic function f(x). For an integer q>0, setting ℰ _nq (ω)=sup‖f−ℰ _n (q,f)‖, the precise value of is obtained.     

Gasdynamische Untersuchung des Jouleschen Überströmversuches

Zusammenfassung Es wird die zeitabhängige Strömung beim Ausgleichsvorgang zwischen zwei endlichen Behältern untersucht. Den Überlegungen wird eine eindimensionale, reibungsfreie und quasistationäre Strömung zugrunde gelegt. Während bei überkritischer Strömung eine analytische Lösung möglich ist, wird das Problem bei unterkritischer Strömung numerisch gelöst.Dem Druckausgleich zwischen den beiden Behältern folgt ein isobarer Wärme- und Massenaustausch, bis sich das thermodynamische Gleichgewicht eingestellt hat.

---

Gasdynamical investigation of Joule's overflow experiment

The time-dependent flow of an exchange process between two big insulated tanks is considered. The problem is treated on the basis of a one-dimensional, inviscid and quasi-steady flow. An analytical solution is obtained for supercritical flow, while for subcritical flow the problem is solved numerically.After the pressure-equilibrium between the two-tanks an isobar heat and mass exchange follows, until the thermodynamic equilibrium is reached.

---

Formelzeichen a Schallgechwindigkeit - A engster Querschnitt - c Geschwindigkeit - c _p spezifische Wärme bei konstantem Druck - c _v spezifische Wärme bei konstantem Volumen - e innere Energie - i Enthalpie - m Masse - M Machzahl - p Druck - spezielle Gaskonstante - s Stromlinie, spezifische Entropie - t dimensionsbehaftete Zeit - T Temperatur - V Volumen - Konstante - Abkürzung - Volumenverhältnis - Verhältnis der spezifischen Wärmen - Dichte - dimensionslose Zeit Indizes 0 Zustand zur Zeitt=0 - 1 Zustand im Überdruckbehälter - 2 Zustand im Überströmbehälter - * Zustand im engsten Querschnitt - K kritisch - M Zustand bei Druckausgleich - E Endzustand bei Temperaturausgleich Herrn Prof. Dr. B. Schmidt in Dankbarkeit zum 60. Geburtstag gewidmet