Highly sensitive routine method for urinary 3-hydroxybenzo[a]pyrene quantitation using liquid chromatography-fluorescence detection and automated off-line solid phase extraction

Many workers and also the general population are exposed to polycyclic aromatic hydrocarbons (PAHs), and benzo[a]pyrene (BaP) was recently classified as carcinogenic for humans (group 1) by the International Agency for Research on Cancer. Biomonitoring of PAHs exposure is usually performed by urinary 1-hydroxypyrene (1-OHP) analysis. 1-OHP is a metabolite of pyrene, a non-carcinogenic PAH. In this work, we developed a very simple but highly sensitive analytical method of quantifying one urinary metabolite of BaP, 3-hydroxybenzo[a]pyrene (3-OHBaP), to evaluate carcinogenic PAHs exposure. After hydrolysis of 10 mL urine for two hours and concentration by automated off-line solid phase extraction, the sample was injected in a column-switching high-performance liquid chromatography fluorescence detection system. The limit of quantification was 0.2 pmol L(-1) (0.05 ng L(-1)) and the limit of detection was estimated at 0.07 pmol L(-1) (0.02 ng L(-1)). Linearity was established for 3-OHBaP concentrations ranging from 0.4 to 74.5 pmol L(-1) (0.1 to 20 ng L(-1)). Relative within-day standard deviation was less than 3% and relative between-day standard deviation was less than 4%. In non-occupationally exposed subjects, median concentrations for smokers compared with non-smokers were 3.5 times higher for 1-OHP (p<0.001) and 2 times higher for 3-OHBaP (p<0.05). The two urinary biomarkers were correlated in smokers (ρ=0.636; p<0.05; n=10) but not in non-smokers (ρ=0.09; p>0.05; n=21).     

Application of preparative high-speed counter-current chromatography for separation of methyl gallate from Acer truncatum Bunge

Preparative separation of methyl gallate in leaves extract of Acer truncatum Bunge was conducted using high-speed counter-current chromatography (HSCCC) with a solvent system composed of ethyl acetate-ethanol-water at volume ratios of 5:1:5 (v/v/v). In a single operation, 57.5 mg of methyl gallate was obtained from 120 mg of the extract. HPLC analyses of the counter-current chromatography (CCC) fraction revealed that the methyl gallate was having over 97% purity. Its structure was identified by 1H NMR and 13C NMR.     

Elastic and inelastic low-energy electron collisions with pyrazine

We present results of ab-initio scattering calculations for electron collisions with pyrazine using the R-matrix method, carried out at various levels of approximation. We confirm the existing experimental and theoretical understanding of the three well-known π? shape resonances. In addition, we find numerous core-excited resonances (above 4.8 eV) and identify their most likely parent states. We also present differential cross sections, showing high sensitivity to the scattering model chosen at low energies. We make recommendations regarding the selection of models for scattering calculations with this type of targets.     

Niobium Alcoholate Clusters with an Octahedral Arrangement of Metal Atoms: [K(CH3OH)4]2 [Nb6(OCH3)18] and [Na([18]crown‐6)(C2H5OH)2]2 [Nb6(OC2H5)12(NCS)6]

Complete exchange : [M₆X₁₂] type cluster compounds with an octahedral M₆ metal atom arrangement, which is completely surrounded by alcoholato ligands, were unknown until now. The first representatives are prepared containing a [Nb₆(OR)₁₂]⁴⁺ unit (R=CH₃ or C₂H₅). They are accessible at elevated temperatures from strongly basic alcoholate solutions of [Nb₆Cl₁₂]²⁺‐containing precursors. C gray, H white, K turquoise, Nb blue, O red.

     

Beiträge zur chemie der Pyrrolpigmente, 10. Mitt.: Elektronenspektrometrische Untersuchungen über die Struktur von Quadratsäurederivaten

The structure of squaric acid derivatives was investigated on the basis of the PPP—SCF—LCAO—MO—CI method utilizing the π-electron densities and bond orders. The parameters used in the calculations were modified to fit the experimental data for representative compounds. The data were obtained by X-ray photoelectron spectrometry and electron absorption spectroscopy (including the polarization of the bands as determined by liquid crystal induced circular dichroism measurements).     

Die Kristallstruktur von Ru2Si3

The crystal structure of Ru₂Si₃ has been refined by leastsquares using three-dimensional X-ray data from a twinned crystal (1355 reflections,R=5.8%). Ru₂Si₃ is isostructural with Ru₂Ge₃ and like this compound a member of the Mn₁₁Si₁₉ structure family. The lattice parameters of the orthorhombic unit cell (Pnca—D ₁₄ ^2h ) are:a=5.530 (1),b=11.060 (2) andc=8.952 (2) Å.

---

---

Mit 1 Abbildung     

Organic synthesis on the microgram scale. III separation and purification of steroids

Summary This paper describes techniques for separation and purification of steroids on the thin-layer plate. Two or more operations can be performed on the same plate in order to avoid loss of material and product.When a steroid diketone (progesterone) is treated with 2,4-dinitrophenylhydrazine on silica gel, three products are obtainable. These compounds can be readily purified on the same thin-layer plate and converted to the parent steroid by means of stannous chloride in dilute hydrochloric acid.

---

Zusammenfassung Trennung und Reinigung von Steroiden auf der Dünnschichtplatte werden beschrieben. Zwei oder mehr Operationen lassen sich, um Substanzverluste zu vermeiden, auf derselben Platte ausführen.Wird ein Diketosteroid (Progesteron) mit 2,4-Dinitrophenylhydrazin auf Kieselgel behandelt, so erhält man drei Reaktionsprodukte, die auf derselben Platte leicht gereinigt und mit Zinn(II)-chlorid in verd. Salzsäure in das entsprechende Ausgangssteroid zurückverwandelt werden können.

     

Thermische Polymerisation von Acenaphthylen

Zusammenfassung Acenaphthylen wurde durch Anpolymerisation und zweifache Hochvakuumsublimation gereinigt. Die Reinigungsmethode wird ausführlich beschrieben.Bei verschiedenen Temperaturen wurde mit einer dilatometrischen Methode die thermische Bruttogeschwindigkeit gemessen. Zwischen 95 und 105 °C giltk _br=7,0₈·10¹⁰ exp (– 30,9 kcal/RT).Die beträchtliche Aktivierungsenergie der Bruttoreaktion ist sowohl auf eine große Aktivierungsenergie der thermischen Startreaktion als auch auf eine relativ hohe Wachstumsaktivierungsenergie zurückzuführen.Das Polymerisationsverhalten von Acenaphthylen kann vermutlich aufgrund seiner sterischen Eigenschaften erklärt werden.

---

Summary Acenaphthylene was purified by partial polymerisation, followed by double stage high vacuum sublimation. The method of purification is described in detail.The thermal overall rate was measured at different temperatures by a dilatometric method. Between 95 and 105 °C the following relation holds:k _th=7,0₈ · 10¹⁰ exp (– 30,9 kcal/RT).The considerable energy of activation of the overall reaction depends on a relatively high energy of activation of both the thermal initiation and the propagation reaction.It is supposed, that the polymerisation behaviour of acenaphthylene depends mainly on its steric properties.

     

Enantioselective Linchpin Catalysis by SOMO Catalysis: An Approach to the Asymmetric α‐Chlorination of Aldehydes and Terminal Epoxide Formation

Time for SOme MOre : For the first time SOMO (singly occupied molecular orbital) activation has been exploited to allow a new approach to the α‐chlorination of aldehydes. This transformation can be readily implemented as part of a linchpin catalysis approach to the enantioselective production of terminal epoxides.

     

Das dielektrische Verhalten von Polyäthern zwischen Mikrowellen- und Infrarot-Gebiet

Zusammenfassung Es wurde die Absorption und Dispersion verschiedener Polyäther im Mikrowellengebiet und im fernen IR untersucht. Mit wachsender Sauerstoffzahl in der Kette werden die Torsions- und Biegeschwingungen wachsend IR-aktiv. Ihre Frequenzlagen ändern sich mit dem zunehmend polaren Charakter der Struktur. Die Analogie zwischen der Verschiebung der Schwingungsfrequenzen und dem Verlauf der Schmelztemperaturen wird diskutiert.Mit zunehmend polarem Charakter steigen der Temperaturkoeffizient der Molpolarisation und die Differenz (–n ²) der Dielektrizitätskonstanten im Mikrowellengebiet und im optischen Bereich stark an. Ein Vergleich mit der Höhe der Dispersionsstufen im fernen IR und deren Temperaturabhängigkeit ergab, daß diese zusätzliche Polarisation nicht allein durch die IR-aktiven Banden bedingt ist. Sie muß gekoppelt sein mit dem ebenfalls stark anwachsenden Untergrundverlust im gesamten mm- und sub-mm-Gebiet.

---

Summary Absorption and dispersion of several polyethers were measured in the microwave region and in the far infrared. The torsional vibrations become increasingly iractive with increasing number of oxygens in the chain. Their frequencies shift, too, in a manner analogues to the variation of the melting temperatures.The temperature coefficient of the mol polarization at 32 GHz and the difference (–n ²) between microwave and optical dielectric constant rise rapidly with increasing polar character of the structure. It was tried to correlate (–n ²) with the overall absorption of the skeletal vibrations. Height and temperature dependence of the far ir dispersion show, however, that the larger part of this additional polarization cannot be accounted for by the resonance absorption bands. It must be correlated with the background loss which extends over the whole mm and sub-mm range and also increases rapidly with increasingly polar structure.

---

---

Mit 10 Abbildungen in 14 Einzeldarstellungen und 2 Tabellen