200KV重离子加速器及其应用

本文介绍一台采用双潘宁型多电荷重离子源的200kV重离子加速器,简述它在GaP光探测器的研制、聚合物材料和金属材料的离子注入改性等方面的研究与应用。     

沸腾分析

本文对不溶有空气的化学纯液和溶有空气的化学纯液的沸腾问题进行分析,讨论这两种液体沸腾时温度变化的情况,指出它们在液沸腾时都要经过一段过热过程。     

BaAl2O4催化同时去除NOx和碳烟的性能研究

BaAl2O4催化同时去除碳烟和NOx具有较高的活性.与非催化燃烧比,在BaAl2O4催化作用下,碳烟的起燃温度(tig)降低了175℃以上,最大燃烧温度(tm)降低了240℃以上.碳烟与BaAl204紧密接触、反应气体中O2含量越高、反应气体的总流量越低越有利于催化反应进行.通过漫反射红外光谱(DRIFTS)分析,证实了以单齿硝酸盐、离子硝酸盐和桥位硝酸盐的形式存在于BaAl2O4表面的NO2(ad)物种与碳烟的反应在同时去除碳烟和NOx的过程中起主要作用.     

Tuning the wettability of calcite cubes by varying the sizes of the polystyrene nanoparticles attached to their surfaces

The wettability of calcite cubes was tuned by varying the sizes of the polystyrene nanoparticles attached to their surfaces via a dispersion polymerization. The products were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), energy dispersion spectrum (EDS) and Fourier transformation infrared spectrum (FTIR). The results showed that the hydrophobicity of the calcite cubes was enhanced with the increase of the size of the polystyrene nanoparticles attached. Using polystyrene nanoparticle-attached calcite cubes (PNACC) as emulsifiers, stable water-in-tricaprylin Pickering emulsions were produced. By gelling the water droplets of the Pickering emulsions, the hierarchical structures of polystyrene nanoparticle-attached calcite cube-armored microspheres were obtained. The polystyrene nanoparticle-attached calcite cubes were expected to have novel surface properties similar neither to traditional Pickering particles, nor to macroscopically asymmetrical Janus particles.     

DNS study of swirling intensity effect on flow pattern of a circular jet

Abstract  

The figures show the 3D flow pattern of a circular jet with different swirling intensity. Reynolds number is approximately 4300 computed based on the nozzle diameter (d), jet velocity (U), and air fluid property at 1 atm and 300 K. The overall computational domain is set to be 4 × 4 × 12 d in spanwise, height, and streamwise direction. The governing equations are the fully compressible Navier–Stokes equations, firstly differenced by eighth-order explicit scheme and then advanced temporarily by using the fourth-order explicit Runge–Kutta method. 3D characteristics non-reflecting boundary condition including transverse source contribution is imposed on all other boundaries except the inflow boundary handled by assigning fixed profiles of temperature and velocity. To ensure the simulation resolution, here over 16 million grids are employed in sum, combined with a handful of grids located at buffer zones of outflow boundaries. To correctly represent the vortex in the flow field, velocity gradient tensor invariant Q is used here. And ψ refers to the swirling intensity defined as the ratio of tangential momentum to axis momentum. As shown in velocity profile, the flow pattern of the jet changes from a close mode to a totally open mode as ψ increases from 0.4 to 1.5. Accordingly, the recirculation zone gradually moves upstream and backflow velocity is enlarged as well. It is inteseting to found that the obvious drops of the momentums in two shown directions always occur at the same position downstream, no matter how large the ψ value is. Therefore, a momentum compensatory mechanism is expected to exist in the vortex-abundant zone. With the increase of ψ value, the increased strain rate in tangential direction can induce vortex more quickly, intensifying the entrainment and velocity-attenuation, which can be observed in Q value profile.     

Dual-beam coaxial amplification system of stimulated Brillouin scattering based on polarization control technology

In the field of Brillouin lidar, it has very important significance to find one method that can amplify the Brillouin scattering signal in real time. One new-type Brillouin lidar detection system based on Nd:YAG pulsed laser and polarization control device is designed in this paper. The key point of this detection system is to have two pulsed coherent lights with same frequency, same polarization and same initial phase, of which one beam is taken as the detection wave for generating stimulated Brillouin scattering signal and the other beam is taken as pumping wave for real time and effective amplification of stimulated Brillouin scattering signal. This detection system mainly includes two pulsed lasers and one electro-optical polarization controller. The laser is mainly used to obtain the pulsed lights with same frequency and same phase, and the polarization controller is mainly used to change the polarization state of two coaxial beams to make them change into same polarization state from orthogonal polarization state thus to enable the pumping wave to amplify the backward stimulated Brillouin scattering signal. It is shown from the experimental results that the adoption of this new system can realize the effect of pumping amplification and can increase the signal to noise ratio to a certain extent.     

Structure and properties of soda lime silicate glass doped with rare earth

Soda-lime-silicate glasses doped with different rare-earth oxides (La₂O₃, CeO₂, Nd₂O₃, Gd₂O₃ and Y₂O₃) of 1 mol% content were prepared with the traditional melting-quenching methods. In order to reveal the effects of rare-earth elements on the behavior of soda-lime-silicate glass, the structure of soda-lime-silicate glasses doped with different rare-earth oxides were determined with Fourier transform infrared spectrometer using the KBr method, and viscosity of glass melts were measured by the rotating crucible viscometer, the melting temperature of the studied glasses were derived on the basis of Arrhenius Equation, moreover the density, bending strength and molar volume were measured and calculated. The effect of rare-earth dopants on the structure of soda-lime-silicate was analyzed by a shift of peak position and variation in the full-width at half-maximum. The effect of doping rare-earth oxides into glass on the viscosity, density and bending strength was interpreted by changing in structure of soda-lime-silicate glasses doped with rare-earth oxides.     

基于HJ-1-CCD数据的地表反射率反演与验证

环境一号卫星OCD相机(HJ-1-CCD)30m的空间分辨率在地物识别中具有潜在优势,然而由于缺少短波红外通道,利用暗像元法反演地表反射率较为困难.基于北京与珠三角地区的地物光谱试验,获得暗像元的植被指数与红、蓝波段反射率比值,构建基于辐射传输模型的大气校正算法.为了验证算法精度,将北京地区卫星反演值与实测的草坪、水体...