Influence of Er-doped superfluorescent fiber source's spectrum-stability on the SNR of fiber optic gyroscopes

The output spectrum-stability of Er-doped superfluorescent fiber source (SFS) was measured by changing the temperature around the excited Er-doped fiber (EDF). With the experiment results, the influences of the SFS's spectrum-stability on the signal-to-noise ratio (SNR) of fiber optic gyroscope (FOG) were simulated. The simulated results demonstrate that the SNR of FOG will change no matter the power, mean wavelength or the spectral bandwidth of the light output from the Er-doped SFS is changing. The results show that the changing of SNR caused by the output power's variation is three orders of magnitude larger than that caused by the variation of mean wavelength or bandwidth. And the main factor influencing the stability of FOG's SNR is the temperature-stability of the output power of Er-doped SFS.     

A row–column addressed micromachined ultrasonic transducer array for surface scanning applications

Row–column addressed arrays for ultrasonic non-destructive testing (NDT) applications are analyzed and demonstrated in this paper. Simulation and experimental results of a row–column addressed 32 by 32 capacitive micromachined ultrasonic transducer (CMUT) array are presented. The CMUT array, which was designed for medical imaging applications, has a center frequency of 5.3 MHz. The CMUT array was used to perform C-scans on test objects with holes that have diameters of 1.0 mm and 0.5 mm. The array transducer has an aperture size of 4.8 mm by 4.8 mm, and it was used to scan an area of 4.0 mm by 4.0 mm. Compared to an N by N fully addressed 2-D array, a row–column addressed array of the same number of elements requires fewer (N instead of N²) pairs of interconnection and supporting electronic components such as pulsers and amplifiers. Even though the resulting field of view is limit by the aperture size, row–column addressed arrays and the row–column addressing scheme can be an alternative option of 2-D arrays for NDT applications.     

Clean prediction of CP-violating processes psi, phi, and Gamma decay to KSKS and KLKL

The ratio of K(S)K(S) (K(L)K(L)) and K(L)K(L) production rates is calculated by considering K(0) - K(0) oscillation in J/psi --> K(0)K(0) decay. The theoretical uncertainty due to strong interaction in J/psi decay is completely canceled in the ratio; therefore, the absolute branching fractions of the CP-violating processes of J/psi --> K(S)K(S) and K(L)K(L) can be cleanly and model-independently determined in the case that J/psi K(S)K(L) decay is precisely measured. In the future tau-charm factory, the expected CP violating process of J/psi --> K(S)K(S) should be reached. It is important to measure J/psi to K(S)K(S) and K(S)K(L) decays simultaneously, so that many systematic errors will be canceled. More precise measurements are suggested to examine the predicted isospin relation in J/psi --> KK decays. All results can be extended to decays of other vector quarkonia, phi, psi(2S), and gamma(1S), etc.     

Controlling chaotic robots with kinematical redundancy

Robots with kinematical redundancy under the pseudoinverse control exhibit undesirable chaotic joint motion, which leads to erratic behaviors. In this study, we used the delayed feedback method to control chaotic motions of a planar 3R rigid and a planar 3R flexible redundant robot under the pseudoinverse control when the end-effector traces a closed-path repeatedly in the work space. It was demonstrated that chaotic motions of robots with kinematical redundancy can be turned into regular motion when the delayed feedback method was applied with some appropriate parameters. This study provides a new insight helpful to solve the repeatability problem of redundant manipulators.     

Search for exclusive multibody non- decays at the resonance

Using data collected at the psi(3770) resonance with the CLEO-c detector at the Cornell e+e- storage ring, we present searches for 25 charmless decay modes of the psi(3770), mostly multibody final states. No evidence for charmless decays is found.     

Effect of γ-ray irradiation on the magnetic properties of NdFeB and Fe–Cr–Co permanent magnets

The effect of γ-ray irradiation on the magnetic properties of NdFeB and Fe–Cr–Co permanent magnets has been investigated. The magnetic flux loss of two kinds of magnets before and after irradiation was measured. Results show that the effect of γ-ray irradiation on the magnetic properties of sintered NdFeB is not so obvious as that on Fe–Cr–Co magnet. Irradiation-induced damage from γ-ray for the Fe–Cr–Co magnets was characterized for the first time. The decline of permanent magnetic properties of Fe–Cr–Co magnet induced by γ-ray irradiation is reversible except for the maximum energy product (BH)_max. The difference of coercivity mechanism between these two kinds of permanent magnets is responsible for the different dependence of magnetic properties loss induced by γ-ray irradiation.     

Characterization of heat-assisted magnetic probe recording on CoNi/Pt multilayers

A method of heat-assisted magnetic recording (HAMR) potentially suitable for probe-based storage systems is characterized. In this work, field emission current from a scanning tunneling microscope (STM) tip is used as the heating source. Pulse voltages of 2–7 V were applied to a CoNi/Pt multilayered film fabricated on either bare silicon or oxidized silicon substrates. Different types of Ir/Pt and W STM tips were used in the experiment. The results show that thermally recorded magnetic marks are formed with a nearly uniform mark size of 170 nm on the film fabricated on bare silicon substrate when the pulse voltage is above a threshold voltage. The mark size becomes 260 nm when they are written on the identical film fabricated on an oxidized silicon substrate. The threshold voltage depends on the material work function of the tip, with W having a threshold voltage about 1 V lower than Pt. A synthesized model, which contains the calculation of the emission current, the simulation of heat transfer during heating, and the study of magnetic domain formation, was introduced to explain experimental results. The simulation agrees well with the experiments.     

基于自衍射效应的自参考光谱干涉方法的研究

研究一种基于非线性透明光学介质中的自衍射和自参考光谱干涉的新方法来进行飞秒激光脉冲测量. 实验中, 基于此新方法设计一种简单装置, 对800 nm 中心波长, 约40 fs 近无啁啾飞秒激光脉冲进行测量, 并与自参考光谱相干电场重建法测量结果进行比较, 得到了一致的结果. 此新方法与相应的装置结构简单, 可以对深紫外到中红外光谱范围的飞秒脉冲进行测量. 关键词： 飞秒激光脉冲 自参考光谱干涉 自衍射 脉冲测量     

组合几何蒙特卡罗粒子输运支撑软件框架JCOGIN介绍

介绍了JCOGIN支撑软件框架层次式、模块化的体系结构及其核心数据结构。这些使得JCOGIN软件框架能够支撑大规模复杂几何的蒙特卡罗（MC）粒子输运并行计算。同时介绍了在JCOGIN支撑软件框架下研发的JMCT程序,并进行了性能测试,在2万处理器核上模拟20亿粒子,并行效率达到70%。     

Parameter determination from current–voltage characteristics of HgCdTe photodiodes in forward bias region

Current–voltage characteristics of HgCdTe photodiodes in the forward bias region have been modeled considering mechanisms including drift-diffusion current, recombination current, metal-semiconductor contact and constant series resistance. Moreover, a fitting method based on the genetic algorithm has been developed to obtain values of related physical parameters from the measured dynamic resistance–voltage curves. Fitting results of $n^+$ -on- $p$ planar devices with different cutoff wavelengths are presented to illustrate the model and method, which are available and promising in acquiring device parameter values and evaluating the electrode contact quality.