A CNDO/INDO crystal orbital model for transition metal polymers of the 3d series—basis equations

The crystal orbital formalism in the tight-binding approximation is combined with a recently developed CNDO/INDO model for transition metal species of the 3d series in order to allow band structure calculations on the Hartree-Fock (HF) SCF level for one-dimensional (1D) chains with organometallic unit cells. The band structure approach based on the CNDO and INDO approximation can be used for any atom combination up to bromine under the inclusion of the 3d series. The matrix elements for the tight-binding Hamiltonian are derived for an improved CNDO and INDO framework. The total energy of the 1D chain is partitioned into one-center contributions and into two-center increments of the intracell and intercell type. Semiempirical band structure calculations on simple model systems are compared with available ab initio data of high quality.     

Mechanism of the oxidation of cycloheptanone by chloramine-T

The oxidation kinetics of cycloheptanone by chloramine-T in alkaline media has been investigated. A mechanism involving the formation of an intermediate by the interaction between the enolic anion of cycloheptanone and chloramine-T in a slow step followed by its interaction with another molecule of chloramine-T in a fast step leading to products has been proposed. The scheme satisfactorily accords with the observed stoichiometry, negligible influence of ionic strength and a positive dielectric effect. Various rate parameters have been computed and 1.2-cycloheptanedione identified as the end product.With 2 Figures     

Spektrophotometrische Bestimmung von L-Askorbinsäure mit 2,2',5,5'-Tetra-(4-nitrophenyl)-3,3'-(3,3'-dimethoxy-4, 4'-biphenyl)-ditetrazoliumchlorid (TNBT)

Zusammenfassung Die Optimalbedingungen für die spektrophotometrische Bestimmung der L-Askorbinsäure mit TNBT wurden ermittelt. Die L-As-korbinsäure wurde in Anwesenheit eines 100fachen Überschusses folgender Stoffe bestimmt: Glukose, Fruktose, Saccharose, Wein-, Zitronen-, Oxal-, Äpfel- und Bernsteinsäure. 0,5g/ml ist die minimale Askorbinsäurekonzentration, die sich bestimmen läßt. Die rel. Standardabweichung beträgt 2,1%, der rel. Fehler 0,875%.

---

Spectrophotometric assay of L. ascorbic acid with 2,2,5,5-tetra-(4-nitro-phenyl)-3, 3-(3,3-dimethoxy-4,4-biphenyl)-ditetrazolium chloride (TNBT)

Summary The optimal conditions for spectrophotometric assay of L-ascorbic acid with TNBT were determined. L-ascorbic acid was assayed in the presence of a 100 fold excess of the following substances: glucose, fructose, sucrose, tartaric acid, citric acid, oxalic acid, malic acid and succinic acid. 0.5g/ml is the minimum concentration of ascorbic acid which can be assayed. The relative standard deviation is 2.1%, the relative error 0.875%.

     

Prospects of thermal analysis in polymer research

A survey and an analysis of the publications concerned in thermal analysis (TA) published in four renowned journals during the years 1965–1974 were performed. The published data were evaluated from three points of view: TA methods used for polymers, properties and phenomena studied by TA methods, types of polymers investigated by TA methods. From the statistical data were derived the future trends for the application of particular TA methods in polymer science.     

Anwendung mikroanalytischer Methoden zur Lösung kunst- und kulturgeschichtlicher Probleme

Zusammenfassung Mit bekannten mikroanalytischen Arbeitsmethoden — Oberflächenreaktionen, Abstrichuntersuchungen mit dem Korundstäbchen, Schutzschichtreaktionen sowie dem Abdruckverfahren — lassen sich archaeometrische Probleme einer Lösung näherbringen. Die Art der Korrosion kupferhaltiger Oberflächen wurde diskutiert.

---

Application of microanalytical methods to the solution of artistic- and cultural historical problems

Summary Archeometrical problems are brought closer to a solution by means of known microanalytical procedures-surface reactions, surface scraping studies with the corundum rod, protective layer reactions as well as the imprint method. A discussion of the corrosion of copper-bearing surfaces is included.

---

---

Vortrag anläßlich der Tagung Chemische Analysen — Kunst- und Kulturwissenschaften im Reiß-Museum in Mannheim, 19.–21. September 1974.     

The surface activity of the lower homologues of n-alkylammonium chlorides in aqueous solutions. Effect of hydrophobic hydration

Summary The surface tensions of aqueous solutions ofn-alkylammonium chlorides (methyl to hexyl) have been measured at 25 °C. With methylammonium chloride the surface tension increased with concentration, whereas with ethylammonium chloride and higher homologues, the surface tension decreased with concentration. The results suggest that this transition is attributed to the effect of hydrophobic hydration. For propylammonium chloride and higher homologues, the relation between the surface tension lowering da and the concentrationC in the range of 0–10 dyne/cm, can be expressed by the equation; = AC + BC, whereA andB are constants. The surface tension coefficientB has been found to increase approximately twofold for each additional CH₂ group of alkyl chain.

---

Zusammenfassung Es wurden die Oberflächenspannungen wäßriger Lösungen vonn-Alkylammoniumchloriden (Methyl- bis Hexylammoniumchloride) bei 25 °C gemessen. Für Methylammoniumchlorid nimmt die Oberflächenspannung mit der Konzentration zu, aber bei allen höheren Homologen mit der Konzentration ab. Die Ergebnisse deuten darauf hin, daß dieser Übergang durch die hydrophobe Hydration bedingt wird. Für Propylammonium-chlorid und die höheren Homologen wird die Beziehung zwischen der Erniedrigung der Oberflächenspannung und der KonzentrationC in dem Bereich von 1 bis 10 dyn/cm durch die folgende Gleichung ausgedrückt: = AC + BC (A undB sind Konstanten). Es wurde gefunden, daß B für jede zusätzliche CH₂-Gruppe etwa um den Faktor 2 größer wird.

     

Intramolecular metal—double bond interactions : VII. Intramolecular cyclization of alkenyl derivatives of lithium,aluminum, gallium and indium

The intramolecular cyclization reactions of tri-1-hex-5-enyl Group III derivatives and of 1-hex-5-enyllithium have been investigated and it is proposed that the reactions may be depicted as internal addition across the terminal double bonds of the alkenyl species. The cyclization reaction proceeds more readily for the 1-hex-5-enyl derivatives than for any other chain length and is dependent on temperature, concentration and solvent. ¹H NMR data and cryoscopic molecular weight data are presented for several diisobutyialkenyl- and diisobutylalkyl-aluminum derivatives. These data have been interpreted in terms of a direct intramolecular interaction between the metal center and the π-electron system of the olefinic site. The intramolecular cyclization reactions for the 1-hept-6-enyl, 1-oct-7-enyl- and 1-undec-10-enylaluminum derivatives also were investigated and it was found that cyclization occurred only for the 1-hept-6-enyl derivative.     

The influence of “two-phase” synthesis conditions on blown film extrusion of LDPE

LDPE synthesized under two-phase conditions is known to have a good balance of blown film properties. Good optical properties and high impact strength are characteristic for two-phase LDPE grades. In order to obtain systematic information, LDPE was synthesized at several different pressures with two different melt index levels. Blown film was extruded at different output rates and melt temperatures. The influence on haze and dart drop impact was studied. Two-phase conditions were found to improve haze and dart drop impact and the improvement was impressive, especially for the low melt index grades. By increasing the output rate, the dart drop values were further improved. The influence of melt temperature on dart drop impact goes through an optimum and overall haze decreases with increasing melt temperature. For films made from two-phase grades, dart drop impact decreases as internal haze increases. For corresponding internal haze values, the films made from single-phase grades have lower dart drop values and they are somewhat scattered.     

A new technique for the identification of chloride ions by the formation of chromyl chloride

Summary A new technique is described for the identification of the chloride ion through the formation of chromyl chloride, based on the extraction of the latter with carbon tetrachloride. The identification limit is 2g of chloride. It is possible to carry out the test in the presence of many other anions, including fluoride, which cannot be present when the traditional distillation technique is employed.

---

Zusammenfassung Vorgeschlagen wird eine neue Technik zum Chloridnachweis durch Bildung von Chromylchlorid. Dieser Nachweis beruht auf der Extraktion des Chromylchlorids mit Tetrachlorkohlenstoff. Die Nachweisgrenze liegt bei 2g Chlorid, wobei die Möglichkeit besteht, den Test auch in Gegenwart von Fluorid durchzuführen, das bei Anwendung der üblichen Destillationsmethoden nicht anwesend sein darf.

     

Kinetic study of copper(II) complexation with 9-ethyl-3-carbazolecarboxaldehyde-thiosemicarbazone and kinetic-spectrophotometric determination of copper(II)

The kinetics of complexation reaction of Cu(II) with 9-ethyl-3-carbazolecarboxaldehyde-thiosemicarbazone (ECCAT) has been examined spectrophotometrically. The ligand was synthesized for the first time. The complexation reaction was carried out in a DMF-water medium at 35°C. The complex has maximum absorbance at 393 nm. Kinetic and activation parameters of the complexation reaction were calculated by the Arrhenius and Eyring equations using the data obtained from investigating the effect of temperature on reaction rates under the specified conditions. We also proposed reaction rate equations. Based on the studied complexation reaction, a simple kinetic method for the spectrophotometric determination of copper(II) has been developed. The calibration graphs are linear in the concentration range 0.2–1.9 μg/mL. The species that caused interference were investigated. The text was submitted by the authors in English.