Intramolecular Diels-Alder Reactions of Decatrienoates: Remote Stereocontrol and Conformational Activation(1)

The intramolecular Diels-Alder (IMDA) reactions of C(8)-substituted decatrienoates have been studied. The stereospecific formation of 11 via an endo-boat-9 transition state attests to the powerful directing influence of a C(8) substituent in the IMDA of decatrienoate. In addition, the contrasting observations that stereospecific 9 --> 11 occurs at room temperature while the nor-tert-butyl substrate (4a) requires 125 degrees C/5 h reaction conditions and produces a 60:40 mixture of diastereomers provide clear evidence that a bulky C(8) substituent is a powerful conformational activator of the IMDA.     

Correlating second harmonic optical responses of single Ag nanoparticles with morphology

Femtosecond laser excited second harmonic (SH) activity from single Ag nanoparticles is reported. A correlation of SH single-particle measurements with high-resolution imaging of particle morphology by TEM was achieved by creating position markers on an optical and electron transparent substrate (Si3N4 thin film, approximately 100 nm). We compared the SH activity of single Ag nanoparticles (nanospheres versus nanorods) and cluster structures (composed of two or multiple particles, e.g., dimers and trimers). The direct correlation of single-particle structures and SH activity, spectral and power dependence, strongly suggests one-photon resonant driven nonlinear oscillator response mechanism.     

N-Monobromamide: Darstellung durch Bromierung mit „Dibromisocyanursäure”, Eigenschaften

By reaction of primary carboxamides with “dibromoisocyanuric acid” (DBI) N-monobromoamides can be readily obtained as well as the N,N-dibromoamides described in an earlier paper¹. Reactions, some of them new, and properties of these compounds are described and compared with those of the N,N-dibromoamides. Like other compounds bearing the NHBr group^{2, 3} the N-monobromocarboxamides disproportionate at room temperature according to: 2 RCONHBr ? ? RCONH₂+RCONBr₂. For CH₃CONHBr the equilibrium constant was found to beK=0.02. In aqueous solution they behave as weak acids. The dissociation constants of eight compounds [R=?CH₃, ?C₂H₅, ?CH₂Cl, ?CHCl₂, ?CCl₃, ?CF₃, ?C(CH₃)₃ and ?C₆H₅] were measured: they differ from those of the corresponding carboxylic acids by about three powers of ten.     

Influence of extended π-conjugation units on carrier mobilities in conducting polymers

Carrier mobilities in thin films of copolymers with repeat units consisting of oligothiophenes bridged by Si atoms are measured over a range of doping levels, where the numbers of thienylenes in the repeat unit are 7, 8, 10, 12, and 14. The mobilities for these polymer films increased with the increase in doping level and the mobility enhancement followed an increasing order of the π-conjugation length. The magnitude of the mobility increase for the Si polymer comprising 14 thiophene units reached ca. 10⁴, implying that this π-conjugation length is almost sufficient to reproduce transport properties of polythiophenes.     

Synthesis of 5,6,8,9,14,14a-hexahydroisoquino[1,2-b][3]benzazepines

Syntheses of 5,6,8,9,14,14a-hexahydroisoquino[1,2-b][3]benzazepine-2,3,11,12-tetrol and related compounds are described. Key steps involve an initial construction of the isoquinoline ring under the Bischler-Napieralski conditions, which is followed by the building of the azepine ring via an intramolecular lactam formation on to the isoquinoline nucleus.     

Use of long-chain alkylamines for preconcentration and determination of traces of molybdenum, tungsten and rhenium by atomic-absorption spectroscopy-II: molybdenum in soils, sediments and natural waters

Molybdenum is extracted as the thiocyanate complex with the quaternary long-chain aliphatic amine Aliquat 336 in chloroform, followed by evaporation of the solvent, dissolution in MIBK, and atomic-absorption spectroscopy. The method is simple, rapid and sensitive, with few interference problems for the determination of the Mo content of soils and sediments in the range 0.1-1.0 ppm with a relative standard deviation better than 5% when 1-g samples are used. Quantitative extraction from large volumes of aqueous solution has also been confirmed, allowing the determination of Mo in natural waters in the ppM range.     

Zum Mechanismus der Hydrogenolyse aromatisch gebundenen Halogens

The selective chlorination of a m/p-xylene mixture, followed by distillation of the unreacted p-xylene, leaves a residue containing up to 90% of monochlorinated m-xylenes. m-Xylene is recovered from the latter by heterogeneous catalytic hydrogenolysis in the gas-phase. It was found that the hydrogenolysis on certain noble metal catalysts proceeds according to an ionic reaction mechanism at temperatures below a definite temperature range. At temperatures above this range hydrogenolysis follows a radical reaction mechanism.     

Hydrophilic polymer membranes containing carboxylic groups—I. Acrylic acid—methyl methacrylate—glycidyl methacrylate copolymers

Copolymers of acrylic acid, methyl methacrylate and glycidyl methacrylate have been synthesized and converted into cross-linked hydrophilic membranes by successive treatments with heat, alkali solution and acidic solution. The copolymerization was carried out in solution using tetrahydrofuran and p-dioxane as solvents. The polymer was obtained as a clear viscous solution at yields of approximately 95%. The polymerization was stopped before gelation took place. This gelation resulted from the reaction of epoxy and carboxylic groups of the polymeric chain. The polymerization time ranged from 3.5 to 7 hr depending on the content of the glycidyl methacrylate in the feed. The monomer mixture consisted of 25–45 mol% of acrylic acid, 40–70 mol% of methyl methacrylate and 2.5–15 mol% of glycīdyl methacrylate. With increasing content of acrylic acid, the membranes became soft and elastic; with decreasing content, they became brittle and hydrophobic. The swelling of the cured polymeric film increased with increase in the acrylic acid content of the monomer mixture and decreased with increasing glycidyl methacrylate content. Dialysis runs were conducted with sodium chloride, urea and a series of ethylene glycols with molecular weights up to 600. The permeability coefficients through the membranes for the ethylene glycols were similar to those through a commercial cellulose membrane (Cuprophane). The permeability proportional to $\text{(permeant molecular wt)}{}^{\mathrm{<mtext>?</mtext><mtext>1</mtext><mtext>2</mtext>}}$. The membranes showed very low permeabilities to sodium chloride compared with those of commercial nonionic membranes. This appears to be due to the ionic exclusion mechanisms expected for ion exchange membranes.     

Anomalies in the asymmetric hydroboration of olefins with the 11 adduct of (+)-α-pinene and BH3 · THF

The hydroboration of cis-2-butene and cis-3-hexene with pure diisopinocampheylborane (IPC₂BH) and monoisopinocampheylborane (IPCBH₂), both prepared from (+)-α-pinene, were studied. In contrast to IPC₂BH, which yielded R-(?)-2-butanol and R-(?)-3-hexanol in 98.4 and 94.5% optical purities, IPCBH₂ yielded S-(+)-2-butanol and S-(+)-3-hexanol in 23.6 and 19.7% optical purifies respectively. PMR examination of the methanolyzed products were utilized to establish the species present in the freshly prepared and aged $\text{1}\text{1}$ adduct from (+)-α-pinene and BH₃ · THF. The results confirm the interpretation previously advanced for the major differences realized in asymmetric hydroboration with the fresh and aged $\text{1}\text{1}$ adducts.