随机噪声对经验模态分解非线性信号的影响

采用Monte-Carlo随机模拟方法来研究外部噪声对经验模态分解非线性信号的影响.结果表明:噪声对低阶特征模态函数(IMF)影响较为明显,对高阶IMF影响较小;白噪声强度系数越大,分解出的IMF纯噪声分量阶数越多;用含噪声信号减去经验模态分解后的主要IMF噪声分量,可较为明显地削弱噪声的影响;含噪声响应的最大Lyapunov指数比不含噪声响应的最大Lyapunov指数小     

非局域密度泛函理论表征活性炭孔径分布的改进算法

为提高由NLDFT计算值确定活性炭孔径分布(PSD)的精度,根据测得的77K氮在非石墨化碳黑BP460和椰壳活性炭K05上的吸附数据,比较了吸附空间及壁面结构采取不同假设对计算结果的影响。结果表明,常规将活性炭吸附空间近似为无限尺寸的石墨化碳黑表面构成的狭缝孔,并由Lorenz-Berthelot混合法则确定相互作用参数,计算值在较低压力区域和试验值之间的偏差明显;而将吸附壁面结构近似为非石墨化碳黑,并由表面粗糙度和石墨晶格分布的误差函数修正相互作用参数后,计算结果和试验值吻合良好。分析结果时发现,归一化方法和考虑周边吸附质分子作用的加权函数是影响NLDFT计算结果准确性的关键因素。     

基于多项式模型法的低端数码相机的颜色特性化

近年来随着数字技术,以及彩色数字图像输入输出设备的不断发展和广泛使用,颜色在不同的设备之间精确的传递或再现成为该领域的重要课题。本论文以彩色数码相机特性化为研究内容,采用多项式转换方法,研究了多项式回归模型不同系数矩阵、不同训练样本对数码相机特性化精度的影响,得出了系数矩阵为11×3多项式模型时误差较小(2.874ΔE*ab)的结论,达到了实用水平。     

具有Manning-Rosen标量势与矢量势的Klein-Gordon方程的任意l波束缚态近似解析解

在球坐标系中研究了具有离心项的Manning-Rosen型标量势与矢量势的Klein-Gordon方程.在标量势等于矢量势的条件下,运用合适的指数近似将具有离心项的径向Klein-Gordon方程转化成超几何微分方程,从而获得了系统的任意l波Klein-Gordon方程解析束缚态径向波函数.最后,对l=0和α=0或1两种特殊情况进行了简单讨论.     

Closed-form Analysis of Lossy Cosine-Squared Tapered Nonuniform Transmission Lines

The rigorous analytical solutions and the ABCD matrix of the lossy Cosine-Squared tapered nonuniform transmission lines (CSTNTL) are presented in this paper. According to different boundary conditions, the unique solution is obtained mathematically. Through the numerical calculations based on analytical solutions, the distributed voltages and currents in different terminated cases are shown to explain the transmission characteristics of CSTNTL. Especially in the lossy case the distributed power values are simulated to show the attenuation phenomenon.     

Vibrational Spectroscopy of Phenols and Phenolic Polymers. Theory,Experiment, and Applications

In the first part of this review, the authors give a survey on the literature of vibrational spectroscopy of phenol, phenol derivatives, and other phenolic componds from the last decade of the last century through today. The classical and modern methods of vibrational spectroscopy are also introduced and a glossary is included to aid comprehension. The second part deals with the literature regarding the importance of vibrational spectroscopy in the investigation and identification of phenolic compounds in natural substances, the application of vibrational spectroscopy in composite and synthetic polymer chemistry, and following of chemical processes and investigating their resulting products. Vibrational spectroscopy is a very good tool for determination of molecular structures and is important in chemical analysis and in the chemical industry.     

Effect of Alkyl Side Chain Length on Relaxation Behaviors in Poly(n-alkyl Acrylates) and Poly(n-alkyl Methacrylates)

Dynamic mechanical analysis (DMA) is used to investigate the effect of alkyl side chain length on the relaxation behavior of poly(n-alkyl acrylates) (PnAA) and poly(n-alkyl methacrylates) (PnAMA) above the glass transition temperature (T_g). Master curves and shift factors (log a_T) were obtained using the time–temperature superposition (TTS) principle. The log a_T curves of PnAA and PnAMA exhibit a dynamic crossover from one Vogel–Fulcher–Tammann–Hesse (VFTH) equation to another above T_g. The corresponding temperature was designated as the dynamic crossover temperature (T_c). It is found that T_c/T_g and the apparent activation energy (E_g) increases, e whereas the fragility index (m) decreases with increasing alkyl side chain length. Further analysis shows that m ∝ T_g, E_g∝ , and E_g∝ m² for both PnAA and PnAMA.     

Structure and Properties of Ultradrawn Polylactide/Thermoplastic Polyurethane Elastomer Blends

Highly oriented self-reinforced 80/20 blends of polylactide (PLA)/thermoplastic polyurethane elastomer (TPU) were successfully fabricated through solid hot stretching technology. Different from the isotropic sample, stress rose rapidly in a low strain region, and exhibited strain hardening for the drawn samples of the PLA/TPU blend. Superior mechanical properties of the blend, with the notched Charpy impact strength 150 KJ/m², and tensile strength 197 MPa, were achieved. With increasing hot stretch ratio, the storage modulus increased, the glass transition temperatures of the PLA-rich phase and TPU-rich phase in the blends moved to higher temperatures, and the melting temperature and crystallinity of the blend increased, indicating the stress-induced crystallization of the blend during drawing. The longitudinal fracture surfaces of the blends at different stretch ratios exhibited orderly arranged fibrillar bundle structure, which contributed to the significantly higher strength and toughness of the blend.     

Preparation,Characterization, and Humidity-Control Performance of Organobentonite/Sodium Polyacrylate Mortar

Organobentonite (OBT)/sodium polyacrylate (PAAS) composite material was prepared. The OBT/PAAS humidity-control cement-based mortars were prepared by mixing OBT/PAAS in mortar. Its morphology and structure were characterized by environmental scanning electron microscope (ESEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and the Brunauer-Emmett-Teller (BET) method. The results showed that the morphology and humidity-control capacity of OBT/PAAS mortar are superior to those of the original mortar. The OBT/PAAS mortar had larger pore specific surface area and larger pore volume, corresponding to the most probable pore diameter, than that of mortar. There was no chemical reaction between mortar and OBT/PAAS and there was no new crystal structure generated. The prepared, solidified OBT-PAAS mortar can maintain humidity in a desiccator at 38～62 RH%.