Three-dimensional microfabrication by two-photon-initiated polymerization with a low-cost microlaser

Fabrication of submicrometer structures by two-photon-initiated polymerization is performed with an inexpensive and low-power microlaser. This is made possible by the design of photoinitiators with strong two-photon absorption cross sections. We analyze the influence of both material properties and irradiation conditions on the two-photon polymerization rate and show that resins based on our highly sensitive two-photon photoinitiator can be solidified with microlaser excitation, whereas commercial UV photoresins require ultrashort and intense laser pulses.     

Distributed-feedback optical parametric oscillation by use of a photorefractive grating in periodically poled lithium niobate

We report a demonstration of distributed-feedback (DFB) optical parametric oscillation (OPO) by writing photorefractive gratings in periodically poled lithium niobate (PPLN). The photorefractive DFB structures were fabricated by illumination of PPLN with UV light through a photomask and by writing of PPLN with UV-light gated interfering laser beams at 532 nm. Evidence of OPO was observed from the spectral narrowing at the 1438.8- and the 619.3-nm signal wavelengths from 1064- and 532-nm-pumped PPLN crystals with the DFB grating periods phase matched to the 4084.5- and 3774-nm idler wavelengths, respectively.     

Optical implementation of scale invariant fractional Fourier transform of continuously variable orders with a two-lens system

A simple two ordinary lens system is proposed to realize the fractional Fourier transform (FRT) of continuously variable order while keeping the scaling factors of both the input and output functions as the same constant independent of the geometric parameters of the system and the FRT orders. It can remove the necessity and inconvenience of using input masks of different scales or any other special devices, and then is helpful to those who want to observe the FRT but have no specific facilities.     

Research of spatial resolution in external electro-optic probing

A new method, based on zero point of longitudinal electric field, was used to determine the spatial resolution of external electro-optic (EO) probing equipment. Considering the diffraction of Gauss beam, the result of external EO probing was simulated which was in accordance with the experiment. A spatial resolution <1 μm was demonstrated initially in our equipment using 650 nm laser diode as probe beam and semi-insulating GaP as probe tip.     

The application of source methods in estimation of an interior sound field

In earlier studies, one has successfully developed three different source methods (SSM, similar source method; IPSM, internal parallel source method; ISM, internal source method) to estimate radiation and scattering sound fields. All these methods are estimations of exterior sound fields. In the present study, the similar source method is modified to estimate an interior sound field. The modification is to move the imaginary sources outside the boundary surface. In addition, general boundary conditions in terms of acoustic admittance or impedance are considered by introducing the suitable least square error functions. Finally, a two-dimensional interior sound field with alternative boundary conditions is evaluated to simulate sound fields inside a car. The results are in agreement with those of boundary integral method.     

Influence of vapor transport equilibration on Raman spectra of Er:LiNbO3 crystals

Raman spectra of as-grown and vapor transport equilibration (VTE) treated Er:LiNbO₃ crystals, which have different cut orientations (X-cut and Z-cut), different Er-doping levels (Er:(0.2, 0.4 and 2.0 mol%)LiNbO₃) and different VTE durations (80, 120, 150 and 180 h), were recorded at room temperature in the wavenumber range 50-1000 cm⁻¹ by using backward scattering geometry. The spectra were attributed on the basis of their spectral features and the previous experimental work and the most recent theoretical progress in lattice dynamics on pure LiNbO₃. In comparison with the pure crystal the most remarkable effect of Er-doping on the Raman spectrum is observed for the E(TO₉) mode. It does not appear at 610 cm⁻¹ as the pure crystal, but locates at 633 cm⁻¹. In addition, the doping also results in the lowering of the Raman phonon frequency, the broadening of the Raman linewidth and the changes of the relative Raman intensity of some peaks. The VTE treatment results in the narrowing of the linewidth, the recovery of the lowered phonon frequency and the further changes of relative Raman intensity. The narrowing of Raman linewidth indicates that the VTE processing has brought these crystals closer to stoichiometric composition. The VTE treatment has induced the formation of a precipitate ErNbO₄ in the high-doped Er(2.0%):LiNbO₃ crystals whether X- or Z-cut. For these precipitated crystals, besides above linewidth and phonon frequency features, they also display more significant Raman intensity changes compared with those not precipitated crystals. In addition, a slight mixing between A₁(TO) and E(TO) spectra is also observed for these precipitated crystals. Above doping and VTE effects on Raman spectra were quantitatively or qualitatively correlated with the characteristics of the crystal structure and phonon vibrational system.     

A fast calculation of excitation autoionization cross-sections of Na-like ions

In this work, based on the calculation in detail, two new fitting formulae of total excitation and excitation autoionization cross-sections for Na-like ions (18?Z?39) are given. For discussing the variation of the total excitation autoionization cross-section, a systematic study of the dependence of the overall branching ratio on incident electron energy and nuclear charge is also carried out.     

Simultaneous estimation of the temperature and heat rate distributions within the combustion region by a new inverse radiation analysis

A new inverse radiation analysis is presented for estimating the heat rate and temperature distributions in the combustion region from the information of the temperature and heat flux profiles of wall elements in the system. The Monte Carlo method is employed to solve the radiative heat transfer equation. The inverse radiation problem is posed as a minimization problem of the least squares criterion, which is solved by the conjugate gradient method. The performance of the present technique of inverse analysis is evaluated and the effects of the errors of the absorption coefficient, emissivity and convective heat transfer coefficient on the inverse analysis are investigated. The results show that the present technique is robust and yields accurate estimation even with noisy measurement.