Critical thickness and stress relaxation in YBaCuO (123) strained epitaxial layers and YBaCuO based strained superlattices

An energy model has been used to calculate the critical thickness h _c of YBaCuO thin films and YBaCuO based superlattices within an isotropic or anisotropic approximation. The critical thickness of single layers calculated from the anisotropic model (16 nm) is in good agreement with the previously published experimental values which are spread out from 4 to 20 nm. In the case of superlattices, relaxation appears to be governed by the critical thickness of the elementary sub-layers and is then better evaluated through the calculation performed for YBaCuO single layers. XRD measurements on YBa₂Cu₃O₇/PrBa₂Cu_3?xGa_xO₇ superlattices grown on {100{ SrTiO₃ have evidenced a tetragonal stress in the YBaCuO ab plane which remains expanded when the YBaCuO elementary layer thickness is lower than 4.8 nm (4 YBaCuO cells). However the critical temperature of the shortest period superlattices is only slightly affected by this expanded stress in contrast to the effect of an elastic stress externally applied along the ab plane of YBaCuO thin films.     

Characterization of reaction products formed during thin-layer chromatographic detection of thiocarbamate herbicides

The reaction between thiocarbamate herbicides and 2,6-dichlorobenzoquinone-N-chloroimine or 2,6-dibromobenzoquinone-N-chloroimine is suitable for the detection of these herbicides on thin-layer plates with high sensitivity. The reactions were followed by infrared, nuclear magnetic resonance and mass spectrometry. We have established the formation of 2,6-dichlorobenzoquinone-S-alkyl sulphenylimines. In the case of the bromo-derivative, halogen exchange and substitution on the quinone ring took place simultaneously leading to the formation of mixed halogenated 2,6-dihalo- and, in addition, 2,3,6-trihalobenzoquinone-S-alkyl sulphenylimines. The final product of the detection reaction, i.e. 2,6-dichlorobenzoquinone-S-alkyl sulphenylimine was reacted with 2,6-dibromobenzoquinone-N-chloroimine where 2,6-dichloro-3-bromobenzoquinone-S-alkyl sulphenylimine formed as a consequence of the looser bromine-carbon linkage on the 2 and 6 positions of the quinone ring.     

4-Amino-imidazole durchThorpe-Cyclisierung

The alkylation of arylaminomethylenecyanamides1 or cyano-imidothiocarbamates2 with -halogen carbonyl compounds followed by base catalysed cyclization yields substituted 4-amino-imidazoles4. Imidazo[4,5-d]pyrimidones5, 6 and imidazo[4,5-b]pyridines7 can be obtained from4.     

The electrocapillarity of polyacrylates

Summary The electrocapillary properties of polyacrylic acid have been studied by two methods. Exploratory measurements have been made of the effect of the polymer on the differential capacity of a mercury drop in 0.1 m sodium perchlorate. They showed that the polymer was strongly adsorbed over a wide range of potentials but that it did not appear to form a monolayer. The surface excess of polymer obtained from drop weight data showed a maximum at very low concentrations and then a decline at higher concentrations. The bulk of the work was carried out by making surface tension measurements, using a sessile mercury drop, in solutions of a fraction of polyacrylic acid (mol. wt. 7.02×10⁴) in potassium chloride at 0.01, 0.1, 0.2, and 0.5 m at 25°C.The data have been used to evaluate the surface excesses of the polymer and of the inorganic ions. The distribution of K⁺ and Cl^– in the electrical double layer and the contact adsorption of Cl^– on the mercury were very little affected by the presence of the polymer. The surface excess of polymer was always found to be greatest at low concentrations, to decrease steeply at first as the concentration was increased and then to decrease more slowly at higher concentrations.Possible explanations of this behaviour are discussed and it is concluded that the rapid decrease is a consequence of molecular weight dispersion and the stronger adsorption of high molecular weight polymer. The slow decrease in surface excess at higher concentrations may be a result of configurational changes of the polymer molecules.Surface pressure data show that, despite this decrease in the surface excess, the surface coverage reaches a high level at very low polymer concentrations and then continues to increase slowly as the concentration of polymer is increased. This apparent contradiction is due to changes in configuration of the adsorbed polymer molecules. At higher bulk concentrations the chain configurations are more compact and each adsorbed molecule makes more contacts with and so occupies a greater area of the mercury surface than at low concentrations.The conclusion is reached that the surface excess of polymer is mostly contained in a layer probably more than 1000 Å thick. It consists of a concentrated and entangled mass of polymer chains. Relatively few of these chains are in contact with the mercury at any istant. The concentration in this surface layer decreases steadily with increasing distance from the mercury surface and it merges without discontinuity into the bulk solution.With 10 figures in 22 details     

Some problems concerning the use of automated radiochemical separation systems in destructive neutron activation analysis

The present state of a long term program is reviewed. It was started to elaborate a remote controlled automated radiochemical processing system for the neutron activation analysis of biological materials. The system is based on wet ashing of the sample, followed by reactive desorption of some volatile components. The distillation residue is passed through a series of columns filled with selective ion screening materials to remove the matrix activity. The solution is thus “stripped” from the interfering radioions, and it is processed to single-elements through group separations using ion-exchange chromatographic techniques. Some special problems concerning this system are treated. (a) General aspects of the construction of a (semi)automated radiochemical processing system are discussed; (b) Comparison is made between various technical realizations of the same basic concept; (c) Some problems concerning the “reconstruction” of an already published processing system are outlined.     

Mössbauer study of iron reduction in hematite containing mineral originated from Aswan area in Egypt

Mössbauer spectroscopy was used to study iron reduction in mineral originated from Aswan area in Egypt. The Mössbauer spectra of samples heat treated at 1000 °C in hydrogen atmosphere show a gradually reduction process of hematite. The main phase of sample aged for 1 h is magnetite, while alpha-iron as well as some silicates and wustite type oxide can be detected in sample aged for 3 h. Further aging of sample results in dissolution of alloying elements /Si, Al/, being present in the samples. This process starts already in samples aged at 1000 °C for 4 h, but it is more expressive in minerals heat treated at 1200 °C or 1300 °C, when all paramagnetic phases disappeared.