Low‐Background,Highly Sensitive DNA Biosensor by Using an Electrically Neutral Cobalt(II) Complex as the Redox Hybridization Indicator

An electrically neutral cobalt complex, [Co(GA)₂(phen)] (GA=glycollic acid, phen=1,10‐phenathroline), was synthesized and its interactions with double‐stranded DNA (dsDNA) were studied by using electrochemical methods on a glassy carbon electrode (GCE). We found that [Co(GA)₂(phen)] could intercalate into the DNA duplex through the planar phen ligand with a high binding constant of 6.2(±0.2)×10⁵ M ^?1. Surface studies showed that the cobalt complex could electrochemically accumulate within the modified dsDNA layer, rather than within the single‐stranded DNA (ssDNA) layer. Based on this feature, the complex was applied as a redox‐active hybridization indicator to detect 18‐base oligonucleotides from the CaMV35S promoter gene. This biosensor presented a very low background signal during hybridization detection and could realize the detection over a wide kinetic range from 1.0×10^?14 M to 1.0×10^?8 M , with a low detection limit of 2.0 fM towards the target sequences. The hybridization selectivity experiments further revealed that the complementary sequence, the one‐base‐mismatched sequence, and the non‐complementary sequence could be well‐distinguished by the cobalt‐complex‐based biosensor.     

高碘酸氧化法快速测定进口粗甘油中甘油含量

建立了高碘酸氧化法快速测定进口粗甘油中甘油含量的分析方法。对高碘酸钠加入量、溶液pH值和放置时间等主要影响因素进行了考察。经试验确定了最佳实验条件:质量浓度为60 g/L的高碘酸钠溶液加入量35mL,pH值在0.4～1.6之间,放置时间40 min。在选定实验条件下,该方法测定结果的相对标准偏差为1.26%(n=7),加标回收率为97.2%～104.1%。     

Template‐Free Hydrothermal Synthesis of Mesoporous MgO Nanostructures and Their Applications in Water Treatment

The controlled synthesis of Mg(OH)₂ nanowires and microflowers composed of nanoplates was successfully achieved by a template‐free hydrothermal synthetic method. It was found that the reaction medium played a crucial role in the morphological control of the precursor nanostructures. The high polarity of water molecules favored the polar growth of the precursor, resulting in the formation of nanowires with a diameter of 80 nm, whereas a mixed water/ethanol medium with a lower degree of polarity led to the formation of microflowers. Moreover, mesoporous MgO nanostructures could be obtained by further annealing these as‐prepared precursors in air at 500 °C for 2 h. During thermal treatment, the wire‐ and flower‐like morphologies were retained. Porosity formation was due to thermal decomposition of Mg(OH)₂ and release of H₂O. Both the mesoporous MgO nanowires and microflowers showed superior ability of adsorbing the organic dye methyl orange, and thus they are promising candidates for polluted water treatment.     

Two New Neolignans from the Stems of Syringa pinnatifolia Hemsl. var. alashanensis

Two new neolignans, syripinnalignins A and B ( 1 and 2 , resp.), were isolated from the 95% EtOH extract of the stem of Syringa pinnatifolia Hemsl . var. alashanensis. The structures of 1 and 2 were elucidated by spectroscopic methods, including UV, IR, HR‐ESI‐MS, and extensive 1D‐ and 2D‐NMR techniques.     

Recycling of Primary Lithium Batteries Production Residues

Production waste of primary lithium batteries constitutes a considerable secondary lithium feedstock. Although the recycling of lithium batteries is a widely studied field of research, the metallic residues of non-rechargeable lithium battery production are disposed of as waste without further recycling. The risks of handling metallic Li on a large scale typically prevent the metal from being recycled. A way out of this situation is to handle Li in an aqueous solution, from where it can be isolated as Li₂CO₃. However, the challenge in hydrometallurgical treatment lies in the high energy release during dissolution and generation of H₂. To reduce these process-related risks, the Li sheet metal punching residues underwent oxidative thermal treatment from 300 to 400 °C prior to dissolution in water. Converting Li metal to Li₂O in this initial process step results in an energy release reduction of ∼70 %. The optimal oxidation conditions have been determined by experimental design varying three factors: temperature, Li metal sheet thickness, and residence time. With 96.9±2.6 % almost the entire Li amount is converted to Li₂O, after 2.5 h treatment at 400 °C for a Li sheet thickness of 1.99 mm. Final precipitation with CO₂ yields 85.5±3.0 % Li₂CO₃. Using pure Li sheets, the product Li₂CO₃ is obtained in battery-grade quality (>99.5 %). Non-precipitated Li is recirculated into the process on the stage of dissolving Li₂O, thus avoiding loss of material.     

Variability in the Formation and Framework Polymorphism of Metal-organic Frameworks based on Yttrium(III) and the Bifunctional Organic Linker 2,5-Dihydroxyterephthalic Acid

Depending on the solvothermal reaction conditions, we obtained three different metal-organic frameworks with yttrium(III) as metal component and 2,5-dihdyroxyterepthalic acid (H₄dhtp) as bifunctional organic linker: Y₂(H₂dhtp)₃(dmf)₄ · (dmf)₂ (CPO-29) contains dinuclear, paddle-wheel like inorganic secondary building units (SBUs) connected by the organic linker to a network with α-Po topology, while Y₂(H₂dhtp)(dhtp)(dmf)₂ (CPO-30) and Y₂(H₂dhtp)(dhtp)(dmf)₂(H₂O)₂ · (H₂O)₄ (CPO-31) contain one-dimensional inorganic SBUs that differ in how the half- and fully deprotonated ligands are connected to and arranged around them. Only the carboxylic acid groups of the organic linker are deprotonated in CPO-29, while CPO-30 and CPO-31 contain both 2,5-dihydroxyterephthalate (H₂dhtp^2–) linkers and fully deprotonated 2,5-dioxidoterephthalate (dhtp^4–) linkers. All three compounds contain large volumes filled with solvent, but we were able to demonstrate permanence of porosity only for CPO-30. Variable temperature powder X-ray diffraction reveals that CPO-29 and CPO-31 undergo discontinuous phase transitions upon heating, and the flexibility of the framework structure indicated by these might be the reason for the inability to access the pore volume. Desolvated CPO-30 and CPO-31 are polymorphs, whose network structures differ in whether the H₂dhtp^2– and dhtp^4– linkers are located in cis or trans arrangement around the inorganic SBU.     

Surface properties and doxorubicin delivery in mixed systems comprising a natural rosin-based ester tertiary amine and an anionic surfactant

A rosin-based ester tertiary amine salt (RETAS) cationic surfactant was obtained using natural rosin as raw material. GC-MS of RETAS was detailed analyzed. The pH-responsive mechanism of rosin-based ester tertiary amine (RETA) and RETAS was confirmed by applying theoretical calculations about electrostatic potential maps of RETA and RETAS cation using Gaussian software. Mixed system surfactants were obtained by blending RETAS cationic surfactant with sodium dodecyl benzene sulfonate (SDBS) anionic surfactant. The binary mixed surfactant systems of RETAS and SDBS had obvious synergistic effect. The γ_cmc and CMC were 39.40?mN/m and 0.56?mmol/L at the optimum molar fraction of RETAS (α)?=?0.6, respectively. The stability time of emulsion with the optimum mixed system as emulsifier increased to 309?s at α?=?0.6. The emulsifying capacity of RETAS was much better than that of RETA. RETAS had pH-responsive targeted release and the optimum mixed system showed a relatively sustained drug release by using doxorubicin (DOX) as a model drug. These results indicate that RETAS surfactant and mixed system surfactant are both promising for applications in drug delivery and emulsification.     

Combined effect of chemically compound graphene oxide‐calcium pimelate on crystallization behavior,morphology and mechanical properties of isotactic polypropylene

The combined nucleation effect of graphene oxide (GO) and calcium pimelate (CaPi) which are chemically compound together (expressed in GO ? CaPi) in isotactic polypropylene (iPP) was investigated. Fourier transform infrared (FTIR), X‐ray diffraction (XRD) and thermogravimetric analysis (TGA) verified that CaPi was chemically compound with GO by chelate bonds. The crystallization behavior and crystalline morphologies of iPP nucleated with different mass ratio of GO and CaPi were investigated. The crystallization peak temperature of iPP nucleated with 0.2 wt% GO ? CaPi with the mass ratio of 1:5 (GO1 ? C5) was increased by 8.3°C when compared with that of pure iPP, and the relative content of β‐crystal reached up to 0.7962. Whereas, the crystallization peak temperature of iPP nucleated with 0.2 wt% GO and CaPi which are blended together by mechanical force (expressed in GO + CaPi) with the mass ratio of 1:5 (GO1 + C5) was only increased by 5.0°C. It was attributed to that the aggregation of GO + CaPi caused the decrease of the crystallization peak temperature, while the GO1 ? C5 uniformly dispersed in the iPP matrix. Unexpectedly, the relative content of β‐crystal of iPP nucleated with 0.02 wt% GO1 ? C5 reached up to 0.8094, and the crystallization peak temperature was increased by 6.7°C compared with that of pure iPP. Meanwhile, the impact strength, tensile strength and heat deflection temperature of iPP nucleated with 0.02 wt% GO1 ? C5 increased by almost 45.86%, 2.03% and 7.7°C, respectively. The iPP nucleated with GO1 ? C5 obtained a balance between stiffness and toughness and the thermo‐mechanical property of nucleated iPP was improved.     

Triple Self‐Sorting in Constitutional Dynamic Networks: Parallel Generation of Imine‐Based CuI,FeII, and ZnII Complexes

Three imine‐based metal complexes, having no overlap in terms of their compositions, have been simultaneously generated from the self‐sorting of a constitutional dynamic library (CDL) containing three amines, three aldehydes, and three metal salts. The hierarchical ordering of the stability of the three metal complexes assembled and the leveraging of the antagonistic and agonistic relationships existing between the constituents within the constitutional dynamic network corresponding to the CDL were pivotal in achieving the sorting. Examination of the process by NMR spectroscopy showed that the self‐sorting of the Fe^II and Zn^II complexes depended on an interplay between the thermodynamic driving forces and a kinetic trap involved in their assembly. These results also exemplify the concept of “simplexity”—the fact that the output of a self‐assembling system may be simplified by increasing its initial compositional complexity—as the two complexes could self‐sort only in the presence of the third pair of organic components, those of the Cu^I complex.