Time dependence of viscosity of dilute polyisobutylene solutions

Summary Shearing at constant gradient of polyisobutylene (PIB) solutions in viscous polybutene oils results in time dependent changes of their viscosities. Two PIB fractions (M=8·10⁶ and 3.8·10⁶) have been studied in a variety of solvents, covering the viscosity range from 5 to 0.5·10⁻² poise. The overall phenomenon is similar to that already observed for polymethylmethacrylate, polystyrene, and polyethylene oxide solutions in Aroclor. Results have been discussed in terms of polymer molecular weight and concentration, solvent viscosity and gradient. The systems investigated are free from strong polar interactions and tendency toward molecular aggregation; time dependent changes of viscosity are therefore observable also for true molecularly dispersed solutions.

---

Zusammenfassung Scherung mit konstantem Geschwindigkeitsgradienten von Polyisobutylen (PIB)-L?sungen in viskosen Polybuten-?len ergibt zeitabh?ngige ?nderungen ihrer Viskosit?ten. Zwei PIB-Fraktionen (M=8·10⁶ und 3,8·10⁶) wurden in einer Vielzahl von L?sungsmitteln untersucht, die den Viskosit?tsbereich von 5 bis 0,5·10⁻² Poise überdeckten. Das ph?nomenologische Erscheinungsbild ist ?hnlich dem schon beobachteten für Polymethylmethacrylat, Polystyrol und Poly?thylenoxid-L?sungen in Aroclor. Die Ergebnisse wurden hinsichtlich des Polymer-Molekulargewichts und der Konzentration, der L?sungsmittelviskosit?t und des Gradienten diskutiert. Die untersuchten Systeme sind frei von starken polaren Wechselwirkungen und von Tendenzen in Richtung auf molekulare Aggregation. Zeitabh?ngige ?nderungen der Viskosit?t sind deshalb auch für wahre molekulardisperse L?sungen beobachtbar.

     

Beiträge zur Chemie der Alkylverbindungen von Übergangsmetallen. XLIV. Tetrakis(alkoxycarbonylmethyl)titan-Verbindungen

Contributions to the Chemistry of Transition Metal Alkyl Compounds. XLIII. Tetrakis(alkoxycarbonylmethyl)titanium Compounds Organotitanium(IV) compounds of the type (ROCOCH₂)₄Ti (R ? C₂H₅, i-C₃H₇, t-C₄H₉, C₆H₅, C₆H₅CH₂) were obtained by reactions of ROCOCH₂Li derivatives with TiCl₄ at low temperature. The compounds which decompose only above 90°C were characterized by the hydrolysis products, anaerobic reactions with iodine, and the i.r. spectra. The bond conditions are discussed.     

On the determination of polarity parameters of silica by means of solvatochromic probe dyes

Empirical solvent parameters of silica surfaces are determined by means of solvatochromic dyes, e.g., Cu(tmen) (acac)⁺ ClO ₄ ^– /B(C₆H₅) ₄ ^– , Fe(phen)₂(CN)₂, and Michlers Ketone dissolved in 1,2-dichloroethane or cyclohexane. The values obtained by UV/VIS-measurements are compared with both the polarity scales of Kamlet and Taft and with Gutmann's donor and acceptor numbers. Kamlet and Taft's -parameter (the hydrogen-bond donation capacity of a solvent) is determined independently by means of salicylideneaniline. The ^* of silica is determined using 5-N,N-dimethylamino-5-nitro-2,2-bithiophene and the complex of tetracyanoethylene with Michlers Ketone, respectively. Further on the reliabilities of the obtained Kamlet-Taft parameters , , and ^* are checked by comparism with experimental and calculated values of theE _T(30)-parameter of silica by means of multi-parameter regression analysis. The surface properties of silica are influenced mainly by HBD-properties (75%) and dipolarity/polarizability ^* (20%), but hardly by the HBA-properties (<5%). UV/VIS-measurements were carried out in a special equipment with glass fiber optics, A drawing of the apparatus is given.     

The recoil of rigid PVC

Polyvinyl chloride (PVC) is widely used in industry, but it is difficult to find any extensive discussion of theological relations that describe it. The present paper discusses the behaviour of rigid PVC in extensional deformations at various temperatures. In the tests, a step elongation was applied at an initial time, then after a delay the specimen was cut, permitting recoil. Both linear and nonlinear strain regimes were studied; the linear relaxation properties (relaxation function, storage modulus) were cross-checked with eccentric-disk measurements. In the non-linear strain regime a single-integral constitutive equation of the KBKZ Wagner type was used. Separability of time and strain effects was demonstrated in our tests and so a damping function could be found which was only a function of strain. Video recordings of recoil were made, and detailed predictions of the strain-time behaviour were checked against experiments.Various constitutive equation proposals were used in the comparison, and the separated kernel integral irreversible model performed reasonably well; some other models of a differential type, and a Doi-Edwards model were not as accurate.Dedicated to Professor Arthur S. Lodge on the occasion of his 70th birthday and his retirement from the University of Wisconsin.     

Debonding of thin external layer exerted by thermodiffusive fluxes

Summary The stress distributions in a matrix, generated by thermodiffusive fluxes, are determined for the case of a thin, inextensible membrane bonded to the bounding plane over the outer regionr (b>0, ). The problem has been reduced to solving a corresponding system of dual integral equations. There exist singularities in the distribution of contact shear stresses, namely one over square root type atr=b while a logarithmic one at the lines of jumps of temperature and/or mass diffusion.

---

Ablösung einer dünner Schicht infolge thermodiffusiver Flüsse

Übersicht Es wird die sich in einer Matrix infolge thermodiffusiver Flüsse einstellende Spannungsverteilung ermittelt wobei auf einen Teil der Grenzfläche (im Bereichr (b>0, )) eine dünne und unverschiebliche Membran aufgebracht ist. Zur Lösung wird das Problem auf ein System von dualen Integralgleichungen reduziert. Die in den Kontaktschubspannungen auftretenden Singularitäten sind einerseits vom reziproken Quadratwurzeltyp am Innenrand, andererseits vom logarithmischen Typ bei Sprüngen in der Temperatur und/oder Massendiffusion.

     

Die Strommer-Zykliden des Flaggenraumes

According to H. BRAUNER a flag space is a three-dimensional affine space with an absolute {,f,F}, wheref is a line in the plane of infinity andF a point onf. A cyclide is a surface of order 4 that intersects only atf. A STROMMER-cyclide is a cyclide generated by translation of a circle in an isotropic plane. In this paper we proof that all STROMMER-cyclides can be generated by translation of an isotropic circle along a divergent Newton-parabola or a conic in a full isotropic plane. We give normal-forms and CAD-pictures of these surfaces. Finaly some geometrical results about STROMMER-cyclides are developed.

---

---

Herrn o.Prof. Dr. Gy. Strommer zum 70. Geburtstag gewidmet.     

Dirichletsche Reihen auf arithmetischen Progressionen

A characterisation of all real Δ≠0 is given, such that $$\overline {f(\sigma + i\Delta \mathbb{N})} = \overline {f(\sigma + i\mathbb{R})} $$ holds for all Dirichlet seriesf(s)=Σa _n n ^?s and all σ greater than the abscissa of absolute convergence off. For only countably many Δ relation (*) is not valid. By using transcendental results it is shown, that (*) holds in the special case, Δ=1.     

Density fluctuations in amorphous and semicrystalline polymers

Summary The small-angle scattering of amorphous and semicrystalline polymers contains an intensity component due to density fluctuations within the crystalline and amorphous domains.For amorphous polymers, the density fluctuations aboveT _g correspond to the theoretical value for a fluid system in thermodynamic equilibrium. BelowT _g , a temperature dependence proportional to T is observed over a range of about 50°. At lower temperatures, a linear relationship with a smaller slope has been found which extrapolates to a non-zero value at 0 °K. This value corresponds to the frozen-in disorder, the slope at low temperatures is related to thermal vibrations and can be evaluated in terms of photon-phonon scattering.Semicrystalline polymers show a temperature dependence of the density fluctuation similar to that of the amorphous polymers. At constant temperature the density fluctuations vary linearly with crystallinity.Natural rubber shows an increase of the density fluctuations with increasing cross-linking densities from which information on the density changes in the vicinity of a cross-link and on the statistics of the distribution of cross-linking can be obtained.

---

Zusammenfassung Die Kleinwinkelstreuung amorpher und teilkristalliner Polymere besitzt eine Intensitätskomponente, die von Dichtefluktuationen innerhalb der kristallinen und amorphen Bezirke herrührt. Für amorphe Polymere entspricht die Dichtefluktuation oberhalb vonT _g dem theoretischen Wert für ein fluides System im thermodynamischen Gleichgewicht. UnterhalbT _g wird eine Temperaturabhängigkeit proportional zuT über einen Bereich von etwa 50° beobachtet. Bei tieferen Temperaturen wird eine lineare Beziehung mit einer geringeren Steigung gefunden, welche zu einem endlichen Wert bei 0 °K extrapoliert werden kann. Dieser Wert bezieht sich auf die eingefrorene Fehlordnung, die Steigung bei tiefen Temperaturen ist auf thermische Schwingungen zurückzuführen und kann als Photon-Phonon-Streuung ausgewertet werden.Teilkristalline Polymere zeigen eine Temperaturabhängigkeit der Dichtefluktuation, die der von amorphen Polymeren ähnlich ist. Bei konstanter Temperatur ändert sich die Dichtefluktuation linear mit der Kristallinität.Naturkautschuk zeigt eine mit der Vernetzungsdichte ansteigende Dichtefluktuation, aus der man Information über die Dichteänderung in der Umgebung eines Netzpunktes und die Statistik der Netzpunktverteilung erhalten kann.

     

Absolute infrared intensities of hydrocarbons

Dipole-moment derivatives, calculated by both the CNDO/2 method with different parameterizations and the INDO method, are compared to the experimental values determined from absolute infrared intensity measurements for the IR active modes of methane, ethane, ethylene and acetylene. A parameter refinement procedure is introduced in which the CNDO/2 molecular orbital parameters are adjusted through a damped least-squares treatment to give best agreement with the observed dipole-moment derivatives. It is found that the refinement does not substantially improve the agreement obtained with the original CNDO/2 parameterization. The INDO method gives somewhat poorer agreement than the CNDO/2 calculations. As an example of the applicability of the molecular orbital methods toward reproducing relative infrared intensities, the spectrum of cyclopropane in the gasphase is examined.

---

Zusammenfassung Die Ableitungen des Dipol-Moments, die nach der CNDO/2-Methode mit verschiedenen Parametrisierungen sowie der INDO-Methode berechnet wurden, werden mit den experimentellen Ergebnissen aus Messungen der absoluten Infrarot-Intensitäten für die IR-aktiven Schwingungen von Methan, Äthan, Äthylen und Azetylen verglichen. Die CNDO/2-Parameter werden mit einer Methode der kleinsten Quadrate den beobachteten Dipol-Moment-Ableitungen angepaßt. Die Ergebnisse sind jedoch nicht wesentlich von denen der ursprünglichen CNDO/2-Methode verschieden. Die INDO-Ergebnisse sind nicht so gut wie die CNDO/2-Ergebnisse. Als Beispiel der Anwendbarkeit der MO-Methoden zur Berechnung von relativen IR-Intensitäten wird das Spektrum des Cyclopropans in der Gasphase untersucht.

---

Résumé Les dérivées du moment dipolaire, calculées par la méthode CNDO/2 avec différentes paramétrisations et par la méthode INDO, sont comparées aux valeurs expérimentales déterminées à partir de mesures d'intensité absolue pour les modes actifs dans l'infra-rouge dans le méthane, l'éthane, l'éthylène et l'acétylène. Les paramètres sont ajustés de manière à donner le meilleur accord avec les dérivées du moment dipolaire. Cet ajustement n'améliore pas sensiblement l'accord obtenu avec la paramétrisation CNDO/2 originale. La méthode INDO donne des résultats moins bons que les calculs CNDO/2. Le spectre du cyclopropane en phase gazeuse est étudié comme exemple de l'applicabilité de la méthode des orbitales moléculaires au calcul des intensités relatives infra-rouge.

     

121Sb-Mössbauer-Spektren von Antimon(V)-Verbindungen. II

¹²¹Sb Mössbauer Spectra of Antimony (V) Compounds. II The Mössbauer resonance effect of ¹²¹Sb has been studied at 4.2 K in a series of 11 antimony(V) compounds which are in most cases bridged. Isomer shift and quadrupole splitting variations are considered in the light of results of X-ray and vibrational spectroscopy. Preparation and the vibrational spectra of [NMe₄][SbCl₄(n₃)₂] are described. Within the limitations of available structural data related tin compounds are compared with those of corresponding ¹¹⁹Sn Mössbauer spectra.