Synthesis of Molecular Wires of Linear and Branched Bis(terpyridine)‐Complex Oligomers and Electrochemical Observation of Through‐Bond Redox Conduction

Films of linear and branched oligomer wires of Fe(tpy)₂ (tpy=2,2′:6′,2′′‐terpyridine) were constructed on a gold‐electrode surface by the interfacial stepwise coordination method, in which a surface‐anchoring ligand, (tpy? C₆H₄N?NC₆H₄? S)₂ ( 1 ), two bridging ligands, 1,4‐(tpy)₂C₆H₄ ( 3 ) and 1,3,5‐(C?C? tpy)₃C₆H₃ ( 4 ), and metal ions were used. The quantitative complexation of the ligands and Fe^II ions was monitored by electrochemical measurements in up to eight complexation cycles for linear oligomers of 3 and in up to four cycles for branched oligomers of 4 . STM observation of branched oligomers at low surface coverage showed an even distribution of nanodots of uniform size and shape, which suggests the quantitative formation of dendritic structures. The electron‐transport mechanism and kinetics for the redox reaction of the films of linear and branched oligomer wires were analyzed by potential‐step chronoamperometry (PSCA). The unique current‐versus‐time behavior observed under all conditions indicates that electron conduction occurs not by diffusional motion but by successive electron hopping between neighboring redox sites within a molecular wire. Redox conduction in a single molecular wire in a redox‐polymer film has not been reported previously. The analysis provided the rate constant for electron transfer between the electrode and the nearest redox‐complex moiety, k₁ (s^?1), as well as that for intrawire electron transfer between neighboring redox‐complex moieties, k₂ (cm² mol^?1 s^?1). The strong effect of the electrolyte concentration on both k₁ and k₂ indicates that the counterion motion limits the electron‐hopping rate at lower electrolyte concentrations. Analysis of the dependence of k₁ and k₂ on the potential gave intrinsic kinetic parameters without overpotential effects: k₁⁰=110 s^?1, k₂⁰=2.6×10¹² cm² mol^?1 s^?1 for [n Fe 3 ], and k₁⁰=100 s^?1, k₂⁰=4.1×10¹¹ cm² mol^?1 s^?1 for [n Fe 4 ] (n=number of complexation cycles).     

Wirkungsgrade in der Welt des Lebens und der Technik

Zusammenfassung Um der oft gehörten Meinung entgegenzutreten, die energetischen Wirkungsgrade lebender Organismen seien wesentlich höher als die technischer Verfahren, werden entsprechende Werte miteinander verglichen. Der sehr niedrige Wirkungsgrad der Photosynthese zusammen mit der kleinen Energiedichte der Sonnenstrahlung erzwang ab einer kritischen Größe die Aufspaltung in Energiesammler, die Pflanzen, und Verbraucher chemischer Energie, den Tieren. Dank den 10 mal höheren Wirkungsgraden in der Technik, lassen sich Solarmobile bauen, die von der auf sie fallenden Sonnenstrahlung angetrieben werden. Wegen des Multiplikationsgesetzes der Teilwirkungsgrade ergeben sich sowohl für die Speicherung der Sonnenenergie in den fossilen Brennstoffen wie in der Nahrungskette extrem niedrige Wirkungsgrade.

---

Efficiencies in the world of life and in engineering

One often hears the opinion, that the efficiencies in the world of life are higher than in engineering. To disprove this, many values of efficiency of corresponding processes are compared. The very low efficiency of photosynthesis in living plants together with the low density of solar radiation has led the world of life to split into collectors of energy, the plants, and consumers of chemical energy, the animals. Thanks to the ten times higher efficiencies of solar cells, it is possible, to produce solar mobiles, vehicles that move driven by solar radiation.

---

---

Herrn Prof. Dr.-Ing. U. Grigull zum 75. Geburtstag gewidmet     

Pore Structure Analysis of Porous Particles by Equivalent Model

Starting from Wheeler's composite theory, which takes both the multilayer adsorption and the capillary condensation into consideration, and assuming the equivalent cylindrical model, we have deduced a strict and relatively simpler formula for the calculation of pore size distribution by solving the integral equation directly. The formula is more convenient for application because of its recursion form. Following the same line of reasoning and using the mean value theorem of definite integrals under different conditions, we have unified the equations of Barrett-Joyner-Halenda, Dubinin, Cranston-Inkley, Dollimore-Heal and Roberts. A table of parameters which is required in the calculation is given. Besides the adsorption of nitrogen, the adsorption with water vapor as the adsorbate is investigated and the corresponding empirical equation of adsorption thickness is given.     

Umsetzung von hydrobromiertem 1,4-Polybutadien mit lithiumorganischen Verbindungen

Ohne ZusammenfassungMit 1 Abbildung und 1 Tabelle     

K2[(UO2)As2O7] – the First Uranium Polyarsenate

Yellowish crystals of K₂[(UO₂)As₂O₇] ( 1 ) have been synthesized by solid‐state reactions method. The structure of 1 [orthorhombic, Pmmn, a = 12.601(2), b = 13.242(2), c = 5.621(1) Å, V = 937.9(3) ų, Z = 4] has been solved by direct methods and refined to R₁ = 0.049, wR₂ = 0.1060 for 1059 observed reflections. The structure of 1 is based upon [(UO₂)As₂O₇]^2? sheets formed by corner sharing between [UO₆]^6? distorted octahedra and [As₂O₇]^4? polyarsenate groups. The K⁺ cations are either in eightfold or tenfold coordination and are located between the sheets. The topology of the uranyl arsenate sheet is related to silicate minerals of the melilite group and related synthetic silicate, aluminate and germanate compounds.     

Synthesis of a Stimuli‐Responsive P‐Chiral Polymer with Chiral Phosphorus Atoms and Azobenzene Moieties in the Main Chain

A reaction of the P‐chiral compound (S,S)‐1,2‐bis(boranato(tert‐butyl)methylphosphino)ethane with an azobenzene derivative gave stimuli‐responsive polymers with P‐chiral phosphines in the main chain. This is the first example of a stimuli‐responsive P‐chiral polymer. The polymer isomerized from the trans to the cis form upon UV irradiation and reverted to the trans form reversibly. The polymer was able to coordinate to platinum, and the resulting polymer complex exhibited the Cotton effect owing to the chirality of the phosphorus atoms. The structure of the P‐chiral polymer obtained could be changed reversibly by light and thermal stimuli, and the polymer chain was induced to rotate helically when complexed with transition metals through the chiral phosphorus atoms.     

Chiral Phosphino‐ and (Phosphinooxy)‐Substituted N‐Heterocyclic Carbene Ligands and Their Application in Iridium‐Catalyzed Asymmetric Hydrogenation

Enantiomerically pure iridium complexes with phosphino‐ and (phosphinooxy)‐substituted N‐heterocyclic carbene (NHC) ligands were synthesized. Investigation of their electronic properties showed a similar trans influence of the phosphino (or phosphinooxy) and the NHC units. The complexes were tested in iridium‐catalyzed hydrogenation. While low conversions were observed with unfunctionalized olefins, the catalysts proved to be suitable for hydrogenation of the α,β‐unsaturated ester 20 , allylic alcohol 21 , and imine 22 . The enantioselectivities were, however, moderate.     

Integrated microfabricated systems including a purification module and an on-chip nano electrospray ionization interface for biological analysis

We report here on an integrated microfabricated device dedicated to the preparation of biological samples prior to their on-line analysis by electrospray ionization-mass spectrometry (ESI-MS). This microfluidic device is fabricated using the negative photoresist SU-8 by microtechnology techniques. The device includes a chromatographic module plus an ESI interface for MS. The chromatographic module is dedicated to sample purification and is based on a polymer monolithic phase which includes hydrophobic moieties. The ESI interface is integrated onto the chip and is based on a capillary slot. We present here the integration of these different modules onto a single system that is fabricated via a SU-8-based microtechnology route. We present also their testing for the purification of peptide samples. This started with a partial integration step with the combination of at least two of the modules (microsystem + monolith; microsystem + nib) and their test before the fabrication and testing of fully integrated microsystems.     

One‐Dimensional,Cofacial Porphyrin Polymers Formed by Self‐Assembly of meso‐Tetrakis(ERE Donor) Zinc(II) Porphyrins

A series of meso‐tetrakis‐(ERE donor) zinc(II) porphyrins n Zn (ERE donor=4‐R‐3,5‐bis[(E)‐methyl]phenyl; 1 Zn: E=NMe₂, R=Br; 2 Zn: E=NMe₂, R=H; 3 Zn: E=OMe, R=Br; 4 Zn: E=OMe, R=H) have been synthesized in excellent yields. As a result of the combination of a Lewis acidic site and eight Lewis basic sites within one molecule, monomeric molecules of n Zn self‐assemble to form one‐dimensional porphyrin polymers [ n Zn]_∞ in the solid state, as confirmed for 1 Zn and 3 Zn by X‐ray crystallography. The coordination environment around the zinc(II) ions in these polymers is octahedral. They are ligated by four equatorial nitrogen atoms of the porphyrin and two apical E atoms (E=N, O) provided by the EBrE donor groups of adjacent n Zn molecules. Complexes 2 Zn and 4 Zn did not form single crystals, but solid‐state UV/Vis analysis points to the formation of similar structures. Solution UV/Vis and ¹H NMR spectroscopy indicated that interactions between 1 Zn and 2 Zn monomers in the polymers are stronger than between 3 Zn and 4 Zn monomers. Interestingly, they also revealed that the presence of a neighboring bromine atom in the EBrE donor groups has a considerable influence on the coordination properties of the benzylic N or O atoms. The zinc(II) ions of the porphyrins most likely adopt only hexacoordination in the solid state, owing to the unique predisposition of Lewis acidic and basic sites in the n Zn molecules. Several parameters of the aggregates, for example, the interplanar separation between porphyrins and the zinc–zinc distances, change as a function of the coordinating E groups. The high degree of modularity in their synthesis makes these zinc(II) porphyrins an interesting new entry in noncovalent multiporphyrin assemblies.     

Die Schmelzdiagramme der Systeme CsN3/Zn(N3)2 und KN3/Zn(N3)2

The phase diagrams of the systems CsN₃/Zn(N₃)₂ and KN₃/Zn(N₃)₂ have been obtained employing the microscopic technique ofL. Kofler andA. Kofler. Within the system CsN₃/Zn(N₃)₂ three eutectics at 148°C, 142°C, and 210°C were found. Besides Cs₂Zn(N₃)₄, melting incongruently in the interval 153°C to 170°C, there exist two further compounds of the most probable composition Cs₃Zn₂(N₃)₇ and CsZn₂(N₃)₅, melting congruently at 170°C and 210°C, resp. In the system KN₃/Zn(N₃)₂ there exist two eutectics at 203°C and 172°C and two compounds, one of them, i.e. K₂Zn(N₃)₄, melting congruently at 206°C, the other one, with composition KZn₃(N₃)₇ or KZn₄(N₃)₉, melting incongruently at 210°C.

---

---

Mit 8 Abbildungen

---

Herrn Professor Dr.Heribert Grubitsch zum 70. Geburtstag gewidmet.