Investigation of the formation process of MCs+-molecular ions during sputtering

In secondary ion mass spectrometry, the detection of MCs+ clusters (with M an element of the specimen) under a Cs bombardment is frequently used for the quantification of major elements. Despite some very good results obtained by this method, some problems still remain. In order to gain some more insight into these problems, the formation mechanism of the MCs+ clusters is investigated using a Monte Carlo model. It is shown that the majority of the constituent particles of the formed clusters are initially first or second neighbor atoms at the surface and that the velocity distribution of the MCs+ clusters becomes broader and peaked at higher velocities with increasing surface binding energy of the M atom. In addition, it is demonstrated that the interaction potential between the M and Cs+ particle has no influence on the velocity distribution of the MCs+ clusters. On the other hand, the cluster formation probability, defined as the probability that a sputtered M and Cs+ particle will form a MCs+ cluster, is extremely sensitive to this interaction potential. It is also shown that the cluster formation probability decreases with increasing surface binding energy. Finally, a good correspondence is obtained between the calculated and experimental velocity distributions of MCs+ clusters sputtered from different monoatomic materials. As a consequence, the Monte Carlo model and the discussed results can be validated.     

One‐Dimensional,Cofacial Porphyrin Polymers Formed by Self‐Assembly of meso‐Tetrakis(ERE Donor) Zinc(II) Porphyrins

A series of meso‐tetrakis‐(ERE donor) zinc(II) porphyrins n Zn (ERE donor=4‐R‐3,5‐bis[(E)‐methyl]phenyl; 1 Zn: E=NMe₂, R=Br; 2 Zn: E=NMe₂, R=H; 3 Zn: E=OMe, R=Br; 4 Zn: E=OMe, R=H) have been synthesized in excellent yields. As a result of the combination of a Lewis acidic site and eight Lewis basic sites within one molecule, monomeric molecules of n Zn self‐assemble to form one‐dimensional porphyrin polymers [ n Zn]_∞ in the solid state, as confirmed for 1 Zn and 3 Zn by X‐ray crystallography. The coordination environment around the zinc(II) ions in these polymers is octahedral. They are ligated by four equatorial nitrogen atoms of the porphyrin and two apical E atoms (E=N, O) provided by the EBrE donor groups of adjacent n Zn molecules. Complexes 2 Zn and 4 Zn did not form single crystals, but solid‐state UV/Vis analysis points to the formation of similar structures. Solution UV/Vis and ¹H NMR spectroscopy indicated that interactions between 1 Zn and 2 Zn monomers in the polymers are stronger than between 3 Zn and 4 Zn monomers. Interestingly, they also revealed that the presence of a neighboring bromine atom in the EBrE donor groups has a considerable influence on the coordination properties of the benzylic N or O atoms. The zinc(II) ions of the porphyrins most likely adopt only hexacoordination in the solid state, owing to the unique predisposition of Lewis acidic and basic sites in the n Zn molecules. Several parameters of the aggregates, for example, the interplanar separation between porphyrins and the zinc–zinc distances, change as a function of the coordinating E groups. The high degree of modularity in their synthesis makes these zinc(II) porphyrins an interesting new entry in noncovalent multiporphyrin assemblies.     

Die Schmelzdiagramme der Systeme CsN3/Zn(N3)2 und KN3/Zn(N3)2

The phase diagrams of the systems CsN₃/Zn(N₃)₂ and KN₃/Zn(N₃)₂ have been obtained employing the microscopic technique ofL. Kofler andA. Kofler. Within the system CsN₃/Zn(N₃)₂ three eutectics at 148°C, 142°C, and 210°C were found. Besides Cs₂Zn(N₃)₄, melting incongruently in the interval 153°C to 170°C, there exist two further compounds of the most probable composition Cs₃Zn₂(N₃)₇ and CsZn₂(N₃)₅, melting congruently at 170°C and 210°C, resp. In the system KN₃/Zn(N₃)₂ there exist two eutectics at 203°C and 172°C and two compounds, one of them, i.e. K₂Zn(N₃)₄, melting congruently at 206°C, the other one, with composition KZn₃(N₃)₇ or KZn₄(N₃)₉, melting incongruently at 210°C.

---

---

Mit 8 Abbildungen

---

Herrn Professor Dr.Heribert Grubitsch zum 70. Geburtstag gewidmet.     

Vernetzung und Abbau von Polyäthylenterephthalat durch Elektronenbestrahlung

Zusammenfassung PÄT-Folien wurden in Luft, Stickstoff und Vakuum bei 20 °C mit 1 MeV-Elektronen bestrahlt. Untersucht wurden Löslichkeit und Viskosität von Proben, die unmittelbar nach der Bestrahlung gelöst wurden.In allen untersuchten Fällen trat bei hohen Bestrahlungsdosen ein unlöslicher, d. h. vernetzter Anteil auf, dessen Ausbildung jedoch durch in den Proben enthaltene Feuchtigkeit verzögert werden kann. Bei niedrigen Bestrahlungsdosen bewirkt Feuchtigkeit einen Abbau des Polymeren, wie durch Viskositätsmessungen gezeigt wird.Aus den Gel-Messungen wurde derp ₀/q ₀-Wert für Bestrahlung in Luft, Stickstoff und Vakuum zu 1,05 bestimmt.Die Änderung des Gel-Anteils bei Lagerung der Proben zwischen Bestrahlung und Lösung wird diskutiert.

---

Summary Polyethyleneterephthalate samples were irradiated in air, nitrogen and vacuum at 20 °C with 1 MeV electrons. The solubility of the samples and the viscosity of the solutions were studied immediately after irradiation. At high doses an insoluble crosslinked part was always observed. Crosslinking was delayed by moisture in the samples. At low irradiation doses moisture causes chain scission as shown by viscosity measurements. The ratiop ₀/q ₀ of degradation to crosslinking in the case of irradiation in air, nitrogen and vacuum was found by gel measurements to be 1.05. The insoluble gel-part changes with increasing storage time of the samples between irradiation and solution.

---

---

Herrn Diplom-PhysikerH. Fischer sei an dieser Stelle für wertvolle Anregungen und Diskussionen besonders gedankt.     

Viskoelastische Eigenschaften von Polyisobutylenen in verdünnten Lösungen

Zusammenfassung Die Speicher- und VerlustmodulnG undG verdünnter Lösungen (2–4%) dreier Isobutylenpolymerisate mit den Molekulargewichten 0,63, 1,29 und 11×10⁵ wurden in der Apparatur vonBirnboim undFerry über einen Frequenzbereich von 0,4–400 Hz und einen Temperaturbereich von –17,5 bis 25,0° bestimmt. Für die scharf fraktionierten Polymerisate von niederem Molekulargewicht ergab die Frequenzabhängigkeit der Moduln eine ausgezeichnete Übereinstimmung mit der Theorie vonZimm. Die aus den experimentell erhaltenen Kurven ermittelten Molekulargewichte und größten Relaxationszeiten waren von der erwarteten Größenordnung. Für das Polymerisat mit höherem Molekulargewicht entsprach die Frequenzabhängigkeit vonG undG – _s jedoch der Theorie vonRouse. Der Einfluß der hydrodynamischen Wechselwirkung in der Bewegung der Knäuelsegmente, in welchem der Unterschied zwischen den beiden Theorien besteht, erscheint als von der Größe des Molekulargewichts abhängig.

---

Summary The storage and loss moduliG andG of dilute (2–4%) solutions of three polyisobutylenes of molecular weight 0.63, 1.29, and 11×10⁵ were determined in the apparatus ofBirnboim andFerry over a frequency range of 0.4 to 400 cps, and a temperature range of –17.0 to 25.0°. The sharply fractionated polymers of low molecular weight showed a frequency dependence in excellent agreement with the theory ofZimm. The experimentally determined molecular weights and terminal relaxation times were of the expected order of magnitude. The frequency dependence of the polymer of highest molecular weight, however, conformed more closely to the theory ofRouse. The influence of the hydrodynamic interaction on the motion of the coil segments, which constitutes the difference in the two theories, appears to depend on the magnitude of the molecular weight.

     

A Novel Environmentally Benign Method for the Selective Oxidation of Alcohols to Aldehydes and Ketones

In the presence of [Ru(terpyridine)(2,6‐pyridinedicarboxylate)], aliphatic and benzylic alcohols are oxidized to the corresponding aldehydes or ketones with high selectivity by using hydrogen peroxide as the oxidant. There is no need for the addition of co‐catalysts or organic solvents. By applying an optimized reaction protocol, high catalyst productivity (turnover number>10 000) and activity (turnover frequency up to 14 800 h^?1) has been achieved.     

Mechanism of the oxidation of cycloheptanone by chloramine-T

The oxidation kinetics of cycloheptanone by chloramine-T in alkaline media has been investigated. A mechanism involving the formation of an intermediate by the interaction between the enolic anion of cycloheptanone and chloramine-T in a slow step followed by its interaction with another molecule of chloramine-T in a fast step leading to products has been proposed. The scheme satisfactorily accords with the observed stoichiometry, negligible influence of ionic strength and a positive dielectric effect. Various rate parameters have been computed and 1.2-cycloheptanedione identified as the end product.With 2 Figures     

Highly efficient recycling of a "sandwich" type polyoxometalate oxidation catalyst using solvent resistant nanofiltration

A "sandwich" type polyoxometalate catalyst ([MeN(n-C8H17)3]12[WZn3(ZnW9O34)2]) was very efficiently recycled by nanofiltration with almost quantitative retention, using an alpha-alumina supported mesoporous gamma-alumina membrane.     

Anwendung mikroanalytischer Methoden zur Lösung kunst- und kulturgeschichtlicher Probleme

Zusammenfassung Mit bekannten mikroanalytischen Arbeitsmethoden — Oberflächenreaktionen, Abstrichuntersuchungen mit dem Korundstäbchen, Schutzschichtreaktionen sowie dem Abdruckverfahren — lassen sich archaeometrische Probleme einer Lösung näherbringen. Die Art der Korrosion kupferhaltiger Oberflächen wurde diskutiert.

---

Application of microanalytical methods to the solution of artistic- and cultural historical problems

Summary Archeometrical problems are brought closer to a solution by means of known microanalytical procedures-surface reactions, surface scraping studies with the corundum rod, protective layer reactions as well as the imprint method. A discussion of the corrosion of copper-bearing surfaces is included.

---

---

Vortrag anläßlich der Tagung Chemische Analysen — Kunst- und Kulturwissenschaften im Reiß-Museum in Mannheim, 19.–21. September 1974.     

Hole and Electron Doping of the 4d Transition-Metal Oxyhydride LaSr3NiRuO4H4

Hole or electron doping of phases prepared by topochemical reactions (e.g. anion deintercalation or anion-exchange) is extremely challenging as these low-temperature conversion reactions are typically very sensitive to the electron counts of precursor phases. Herein we report the successful hole and electron doping of the transition-metal oxyhydride LaSr₃NiRuO₄H₄ by first preparing precursors in the range La_xSr_4−xNiRuO₈ 0.5<x<1.4 and then converting into the corresponding La_xSr_4−xNiRuO₄H₄ phases. This is particularly noteworthy as the (Ni/Ru)H₂ sheets in the La_xSr_4−xNiRuO₄H₄ phases are structurally analogous to the CuO₂ sheets in cuprate superconductors and hole doping (Ni^1+/2+, Ru²⁺) or electron doping (Ni²⁺, Ru^1+/2+) yields materials with partial occupancy in Ni/Ru –H 1s bands which are analogous to the partially occupied Cu –O 2p bands present in the CuO₂ sheets of doped superconducting cuprates.