Graft Polymerization of Methyl Methacrylate- Acrylonitrile onto Poly(ethene-co-1-butene) and Its Toughening Effect on SAN Resin

Poly(ethene-co-1-butene)-graft-methyl methacrylate-acrylonitrile (PEB-g-MAN) was prepared by suspension grafting copolymerization of methyl methacrylate (MMA) and acrylonitrile(AN) onto PEB. PEB-g-MAN/SAN resin blends (ABMS) were prepared by blending PEB-g-MAN with styrene-acrylonitrile copolymer (SAN resin). The effects of AN/(MMA+AN) feed ratio (f_AN), PEB/(PEB+MMA+AN) feed ratio (f_PEB) and benzoyl peroxide (BPO) dosage on the monomer conversion ratio (CR), rubber's grafting ratio (GR), grafting efficiency (GE) of the copolymerization and the toughening effect of PEB-g-MAN on the SAN resin were investigated. FTIR quantitative analysis showed that when the weight percent of AN unit in the unextracted product was 21.5 wt% with f_AN of 25 wt%, the toughening effect of unextracted PEB-g-MAN on SAN resin was the highest. Gel permeation chromatography (GPC) analysis showed that when f_AN was 25 wt%, the grafted copolymer had the lowest molecular weight and ABMS had highest toughness. Transmission electron microscopy (TEM) analysis showed that the highest toughness occurred when the phase structure of ABMS was cocontinuous with f_AN of 25 wt%. When f_AN was 25 wt% PEB-g-MAN domains have numerous small SAN domains in them, which was occlusion structure. Scanning electron microscopy (SEM) analysis indicated that the ABMS fracture surfaces had plastic flow visible, which looked like a craze fibers morphology, for the sample with highest impact strength (f_AN = 25 wt%). Dynamic mechanical thermal analysis (DMA) showed that the miscibility of the PEB phase and SAN phase improved after graft copolymerization of MMA and AN onto PEB.     

Properties of Natural Rubber Vulcanizates/Nanosilica Composites Prepared Based on the Method of In-situ Generation and Coagulation

Using the characteristics of silica sol dispersing well in water and easy formation of silica gel when the silica sol is heated, by mixing a system of concentrated natural rubber latex and silica sol, the silica sol can in-situ generate SiO₂ particles when heated. After coagulation of the mixed system, natural rubber/nanosilica composites C(NR/nSiO₂) were obtained. The composites C(NR/nSiO₂) and their vulcanizates were studied using a rubber processing analyzer (RPA), dynamic mechanical analysis (DMA), and scanning electron microscopy (SEM). The influence of silica contents on the C(NR/nSiO₂) vulcanizates mechanical properties, cross-linking degree, Payne effect, dissipation factor (tanδ), and the particle size and dispersion of SiO₂ in NR were investigated. The results obtained were compared with the NR/SiO₂ composites based on traditional dry mixing of bale natural rubber and precipitated silica (white carbon black). The results showed that when using a sulfur curing system with a silica coupling agent (Si69) in C(NR/nSiO₂), the vulcanizate had better mechanical properties, higher wet resistance, and lower rolling resistance than those without Si69. In the composites C(NR/nSiO₂) and their vulcanizates, the SiO₂ particles’ average grain diameter was 60 nm, and the good-dispersion of the in-situ generated SiO₂ in the rubber matrix were a significant contribution to the satisfactory properties of C(NR/nSiO₂) composites and their vulcanizates.     

Interaction of Moxifloxacin with Bovine Hemoglobin and Effect of the Coexistent Drugs on the Reaction

The interaction between moxifloxacin (MXFX) and Bovine Hemoglobin (BHb) was investigated at different temperatures by fluorescence spectroscopy. Results showed that the quenching mechanism of MXFX on BHb was a static quenching process with Förester spectroscopy energy transfer. The primary binding for MXFX was located at β-37 Tryptophan residue in hydrophobic cavity of BHb. Besides, weak negative cooperativity was found in drug's binding with BHb. Synchronous spectra revealed that the microenvironment and the conformation of serum albumin were changed during the reaction. Most antibiotics had no effect on the system of BHb-MXFX, except quinolone antibiotics. The system had good stability.     

Binding Study of Phenformin with Bovine Serum Album Using a Combined Technique of Equilibrium Dialysis with Flow-Injection Chemiluminescence Detection

ABSTRACT

The interaction between phenformin hydrochloride and bovine serum albumin (BSA) was investigated by the methods of chemiluminescence combined with equilibrium dialysis technique. A novel N-bromosuccinimide (NBS)–eosin Y (EY) chemiluminescence (CL) method was established for the determination of phenformin. The mechanism of this chemiluminescence system was proposed. Optimization studies were performed to determine the phenformin. Under the optimal conditions, the CL intensity was linear for a phenformin concentration over the range of 4.6 × 10^?8 to 5.0 × 10^?5 g/mL. The detection limit was 1.5 × 10^?8 g/mL. The data obtained by the present equilibrium dialysis–CL system were analyzed using the Klotz plot and the Scatchard analysis. The results showed that the Klotz plot and the Scatchard plot are linear with good correlation coefficient, indicating that the phenformin has only one type of binding site on BSA. The binding parameters were the number of the binding sites n (1.02) and the estimated association constant K (2.66 × 10⁴ L/mol). The chemiluminescence system combined with equilibrium dialysis developed in this work demonstrated its use for determination of interaction between drug and protein by using relatively simple instrument.     

A Novel Pyrene Fluorescent Sensor Based on the π–π Interaction Between Pyrene and Graphene of Graphene–Cadmium Telluride Quantum Dot Nanocomposites

In this article, water-soluble graphene–cadmium telluride quantum dot nanocomposites were fabricated through the synthesis of cadmium telluride quantum dots in the presence of graphene aqueous dispersion. It was found that pyrene could remarkably quench fluorescence of graphene–cadmium telluride quantum dot nanocomposites. On this basis, a novel method for the determination of pyrene was developed. Factors affecting the pyrene detection were investigated, and the optimum conditions were determined. Under the optimum conditions, a linear relationship could be established between the quenching of fluorescence intensity of graphene–cadmium telluride quantum dot nanocomposites and the pyrene concentration in the range of 6.00 × 10^?8–2.00 × 10^?6 mol L^?1 with a correlation coefficient of 0.9959. The detection limit was 4.02 × 10^?8 mol L^?1. Furthermore, the nanocomposites were applied to practical determination of pyrene in different water samples with satisfactory results.     

Selection of optimal combinations of inputs in a partial least squares model for prediction of soil organic matter

Abstract

Partial least squares model is widely used in estimation of soil physical and chemical parameters such as soil organic matter and moisture content, due to its advantages in dealing with collinearity of variables like hyperspectral reflectance. However, it is hard to determine optimal combination of partial least squares model input for soil organic matter prediction since there are lots of possibilities such as, different mathematical transformation of spectral reflectance, wavelength ranges, and spectral resolution. Laboratory hyperspectral reflectance of soils in Songnen plain were analyzed in this study, and the orthogonal experimental design method for deriving optimal combination of input variables for soil organic matter prediction models was introduced. For intercalating orthogonal experimental design table, five different levels which commonly used by researchers were assigned to factors. Results show that the optimal combination input for single black soil is using the derivative logarithmic reciprocal reflectance in the wavelength range selected by multiple stepwise regression at a spectral resolution of 5?nm (R²=?0.95, RMSE?=?0.21, and RPD?=?4.49), and different soils is using continuum removed in the wavelength range selected by MSR at a spectral resolution of 5?nm (R²?=?0.77, RMSE?=?0.74, and RPD?=?2.08). With optimal combination input, the partial least squares model prediction ability was evaluated as excellent for single black soil, possible for different soils. This study illustrates the orthogonal experimental design method can be an effective way to identify the optimal input variables of a partial least squares model for soil organic matter prediction, and multiple stepwise regression can be a preprocessing step to reduce hyperspectral data redundancy before using partial least squares to predict soil organic matter. Overall, this study provides a new approach for determining optimal input of partial least squares predicting model.     

Influence on drug efficacy of the binding behavior of pioglitazone hydrochloride with tryptophan residues,and tyrosine residues in bovine transferrin

Abstract

The interaction of pioglitazone hydrochloride bound to tryptophan residues and tyrosine residues in bovine transferrin was investigated using synchronous fluorescence spectroscopy at various temperatures (298, 310, and 318?K). From binding constants and thermodynamic parameters, it was shown that 1:1 stable compound was formed by the electrostatic force interaction of pioglitazone hydrochloride bound to tryptophan residues and tyrosine residues in bovine transferrin. The extent of binding between pioglitazone hydrochloride and tryptophan residues in bovine transferrin was more than that between pioglitazone hydrochloride and tyrosine residues in bovine transferrin. At 310?K, the fluorescence quenching ratio number of tyrosine residues and tryptophan residues in bovine transferrin were 47.52% and 54.19%, respectively, which indicated that the fluorescence contribution of tryptophan residues was greater. At 310?K, pioglitazone hydrochloride-tyrosine residues(in bovine transferrin) binding rate were 55.60–73.82%, and the combined model was W?=??0.0315R²???0.1520R?+?0.7385. The value of Hill’s coefficients was greater than 1, which suggested that there was a positive cooperativity between pioglitazone hydrochloride and subsequent ligands. The results of molecular docking were consistent with that of experimental calculation.     

Fluorescence resonance energy transfer between cerium ion(III) and levofloxacin in micellar solution and its analytical application to the determination of levofloxacin

Fluorescence resonance energy transfer between cerium ion(III) and levofloxacin is studied in a micellar solution of cetyltrimethyl ammonium bromide. A non-fluorescent 1:2 complex was formed between excited cerium ion(III) and ground state levofloxacin. The fluorescence of cerium ion(III) is quenched by levofloxacin with the quenching in accordance with the Stern–Volmer relation. The analytical relationship was established between the ratio of the fluorescence of levofloxacin present and absent cerium ion (III) and the concentration of levofloxacin, which helped to estimate the content of levofloxacin directly.     

Variations in the Concentrations of Cu and Zn and in the Ratio of Cu to Zn in Whole Blood and Hair Samples from Hepatocellular Carcinoma Patients and from Healthy Controls in Taiwan

An atomic absorption spectrophotometer was used to determine concentrations of copper and zinc and the ratio of Cu to Zn in samples of whole blood and hair from hepatocellular carcinoma (HCC) patients (n=51) and from healthy controls (n=50) in Taiwan. Our results indicate that the HCC patients have higher copper concentrations and higher ratios of Cu to Zn than do the healthy controls both in whole blood and hair samples, but only the concentration of copper and the ratio of Cu to Zn in whole blood were significantly different (p<0.001 and p<0.05). Conversely, a lower concentration of zinc was found in whole blood and hair samples of HCC patients. Similarly, only the concentration of zinc in whole blood showed a significant difference (p<0.001). We concluded that the whole blood concentrations of copper and zinc and the ratio of Cu to Zn seemed to have a higher correlation with HCC. Thus, we suggest that a sample of whole blood may be a more suitable diagnostic sample than is a hair sample for HCC.     

The Mineral Content of Rhizona cyperi after Microwave-Assisted Digestion and Determination by AAS

ABSTRACT

Rhizoma cyperi (tuberal part of Cyperus rotundus Linn) obtained from 15 different zones of China was studied to determine the contents of 16 trace elements such as 4 minor (Ca, K, Mg, and Na), 9 trace (Co, Cr, Cu, Fe, Mn, Mo, Ni, V, and Zn), and 3 toxic (Ag, Cd, and Pb) elements. The concentration determination of 16 elements was performed by atomic absorption spectrophotometry (AAS) after microwave-assisted digestion. A microwave-assisted digestion procedure based on the mixture nitric acid–hydrogen peroxide was evaluated. The method was successfully validated with the good recoveries (97–105%) against CRM GBW07603 (bush twigs and leaves). The calibration curve furnished good linear correlation coefficients (r = 0.9956–0.9999), excellent recoveries (99.35–103.7%), and limits of detection (LOD = 1–50 ng·mL^?1) suitable to determine in Rhizoma cyperi. The results showed that K, Ca, Mg, and Na were the most abundant of the major elements in Rhizoma cyperi with average concentrations of K, 26,221 µg·g^?1; Ca, 1097 µg·g^?1; Mg, 714 µg·g^?1, and Na, 293 µg·g^?1, respectively. K element was determined for the first time in this plant.