The freeze of intrapulse Raman scattering effect of ultrashort solitons in optical fiber

The effect of intrapulse Raman scattering (IRS) for the propagation of the femtosecond solitons in an optical fiber is investigated. To factually simulate its influence, a combination of 27 Lorentian lines to fit experimental Raman gain profile is adopted. By using nonlinear Schrödinger equation and finite-difference time domain method, the propagations of femtosecond fundamental solitons in an optical fiber are numerically calculated. When the initial power is suitably enhanced, it is found that the pulse shape is almost the same as initial pulse and the delay Raman response only makes small pulse shift. In other words, when ultrashort soliton is considered, the IRS effect is similarly frozen under the enhanced initial power.     

Electronic structure and site occupation for the intermediate phase of LaNi4.5Al0.5Hy

The crystal structure, electronic structure and hydrogen site occupancy of LaNi_4.5Al_0.5H_y intermediate phase (y=2.0, 3.0, 4.0) have been investigated using the full-potential linearized augmented plane wave (FLAPW) method. For the first time we analyzed the interstitial site occupation of hydrogen atoms. The H atoms were found to prefer the 6m, 3f and 12n sites, while no 4h sites were occupied. A narrowed Ni-d band is found due to the lattice expansion: the total DOS at E_F increases with y, which indicates that the compounds become less stable. The interaction between Al and Ni, with H plays a dominant role in the stability of LaNi_4.5Al_0.5H_y intermediate phase. The smaller the shift of E_F towards the higher energy region, the more stable the compounds will be. Our results are compared with experimental data and discussed in the light of previous works.     

Ti deficiency effect on the dielectric response of CaCu3Ti4O12 ceramics

Single phase ceramics CaCu₃Ti_4.0O₁₂ and CaCu₃Ti_3.9O₁₂ have been prepared using the traditional solid-state reaction method. Compared with the stoichiometric ceramics CaCu₃Ti_4.0O₁₂, Ti-deficient ceramics CaCu₃Ti_3.9O₁₂ have the larger lattice parameter, the higher force constant, and smaller dielectric constant and the lower dissipation factor, although their fundamental characters of dielectric response are similar. Their characteristic relaxation frequencies are not well fitted with the Arrhenius Law but a tentatively supposed relation. With the Cole-Cole Law, the fitted broadened factors of dissipation peaks are 0.5433 and 0.8651 for CaCu₃Ti_3.9O₁₂ and CaCu₃Ti_4.0O₁₂, respectively. All facts mentioned above imply that mutually correlated motion of Ti ions or defects may be expected to be responsible for the giant dielectric constant and high dissipation factor of CaCu₃Ti_4.0O₁₂.     

非线性左手材料中的二次谐波

基于电磁场理论，推导了无耗非线性左手材料中二次谐波的曼利－诺关系，及相位匹配条件下正向基波与逆向二次谐波的能量转换过程及其空间分布.验证了可将无耗非线性左手材料的入射面作为反射镜，把能量以二次谐波的形式反射.同时分别给出有限厚度介质板中基波和二次谐波的场强分布数值结果，验证了结论的正确性.最后从相位失配角度说明了相位匹配是分析非线性左手材料二次谐波的重要条件.这为研究左手材料的非线性理论奠定了基础.     

碳纳米管束中的正电子理论

采用中性原子叠加模型和有限差分方法(SNA-FD)计算了大范围内不同管径的单壁碳纳米管束中的正电子情况，发现对于单壁碳纳米管束，正电子的主要湮没区域，湮没对象和正电子寿命随碳纳米管管径的不同而发生规律性变化.计算得到管径范围在0.8—1.6nm的碳纳米管束的正电子寿命范围为332—470ps，与实验测得的394ps符合较好.     

Nd0.67Sr0.33MnOy(Y＜3.0)中的自旋相关电致电阻效应

用固相反应法制备系列Nd0.67Sr0.33MnOy(y=3.00-2.80)多晶样品.样品输运性质表现出自旋相关电致电阻特征.对氧含量等于化学计量样品,在测量温度范围内电阻不随负载电流变化,I-V曲线符合线性欧姆定律.对氧含量低于化学计量样品,当高于某一特征温度时,电阻变化符合线性欧姆定律;但低于这一特征温度时,电阻大小与负载电流有关,I-V曲线偏离线性规律;在绝缘体-导体相转变点附近,样品电阻随负载电流增大而迅速减小,表现出巨大电致电阻效应.对于y=2.85样品,当电流从1μA增加到30μA时,电致电阻接近80%.这种自旋相关的电致电阻行为与氧含量和界面有很大关系.     

Development of an integrated optical system for warpage and hermeticity test of microdisplay

We have developed an integrated optical system to measure the warpage of a microdisplay product at post-packaging die-attach temperature and to test its hermeticity after manufacturing. This system is constructed based on the principle of Twyman/Green (T/G) interferometry and Newton interferometry. T/G interferometry is used to characterize warpage of the microdisplay's base-plate, while Newton interferometry is used to characterize the gap variance between face-plate and base-plate of the microdisplay. With these measurements, deformation and shape of the microdisplay can be comprehensively determined during its manufacturing process, which is critical for its quality test and reliability evaluation. Delicate mechanical system was designed to facilitate the optics integration and alignment. To evaluate the performance of the optical system itself, warpage of a sample was re-measured with Tailor–Hobson profilometer whose resolution is 10 nm, the results from these two testing systems agree well with each other. Some application examples of the integrated testing system were presented to verify its work efficiency.     

复叠式低温保存箱系统设计关键问题分析

以R404A/R23为制冷剂,利用二元单级复叠制冷循环,开发出-86℃大容量低温保存箱。文中对蒸发器优化布置、冷凝蒸发器中间温度确定、毛细管设计以及如何保证设备安全运行等关键问题进行了分析。     

Influence of tungsten doping concentration on the electronic and optical properties of anatase TiO2

The structural, electronic and optical properties of tungsten-doped TiO₂ have been investigated using density functional theory with plane wave basis sets and ultrasoft pseuodopotential. Substitutional W doping at Ti sites create W 5d states just below the conduction band minimum while interstitial W doping gives isolated W 5d states in the middle of forbidden region. Averaged bond lengths show that W doping at Ti sites produce minimum structural distortion as compared to the interstitial W-doped TiO₂. Substitutional W-doped TiO₂ has better visible light absorption compared to interstitial W-doped TiO₂ and has stable configuration which provide reasonable explanation for the experimental findings. Tungsten doping in TiO₂ with different doping concentrations is investigated as an enabling concept for enhancing the visible light absorption. Optical properties show that optimal W doping concentration would improve the visible light absorption. 2.08% W doping concentration gives strong visible and ultraviolet light absorption among all doped models found consistent with experiments.     

单层钨丝阵Z箍缩内爆不稳定性特征实验研究

基于激光阴影像,研究了直径为8 mm的钨丝阵在滞止阶段的不稳定性发展。实验结果表明,在消融阶段早期,不稳定性扰动的主导波长为0.2 mm。在内爆后期和滞止阶段,不稳定主导波长迅速向长波长方向发展。在功率峰值前后,扭曲不稳定性特征开始出现,在滞止等离子体柱达到最小收缩直径后,辐射功率出现了明显下降。