Organic–inorganic nanocomposites prepared from fluoro-aramid and silica

Fluoro-aramid-based sol/gel-derived nanocomposites were synthesized by condensing a mixture of 4,4′-(hexafluoro-isopropylidene)dianiline and 1,3-phenylenediamine with terephthaloylchloride (TPC) in dimethylacetamide. TPC was added in slight excess to produce amide chains with carbonyl chloride end groups and then replaced with alkoxy groups using aminophenyltrimethoxysilane to develop bonding with the silica network. Mechanical, dynamic mechanical thermal, water absorption and morphological measurements were carried out on the thin hybrid films. Increase in the tensile strength and modulus was observed as compared to pristine polyamide. The thermal decomposition temperature was found in the range of 400–500 °C. The water absorption was found to be reduced with higher silica content. The glass transition temperature and the storage moduli increased with increasing silica concentration. The maximum increase in the T _g value (345 °C) was observed with 20 wt% silica. Scanning electron microscopy revealed the uniform distribution of silica in the matrix with an average particle size ranging from 8 to 50 nm.     

Wirkungsgrade in der Welt des Lebens und der Technik

Zusammenfassung Um der oft gehörten Meinung entgegenzutreten, die energetischen Wirkungsgrade lebender Organismen seien wesentlich höher als die technischer Verfahren, werden entsprechende Werte miteinander verglichen. Der sehr niedrige Wirkungsgrad der Photosynthese zusammen mit der kleinen Energiedichte der Sonnenstrahlung erzwang ab einer kritischen Größe die Aufspaltung in Energiesammler, die Pflanzen, und Verbraucher chemischer Energie, den Tieren. Dank den 10 mal höheren Wirkungsgraden in der Technik, lassen sich Solarmobile bauen, die von der auf sie fallenden Sonnenstrahlung angetrieben werden. Wegen des Multiplikationsgesetzes der Teilwirkungsgrade ergeben sich sowohl für die Speicherung der Sonnenenergie in den fossilen Brennstoffen wie in der Nahrungskette extrem niedrige Wirkungsgrade.

---

Efficiencies in the world of life and in engineering

One often hears the opinion, that the efficiencies in the world of life are higher than in engineering. To disprove this, many values of efficiency of corresponding processes are compared. The very low efficiency of photosynthesis in living plants together with the low density of solar radiation has led the world of life to split into collectors of energy, the plants, and consumers of chemical energy, the animals. Thanks to the ten times higher efficiencies of solar cells, it is possible, to produce solar mobiles, vehicles that move driven by solar radiation.

---

---

Herrn Prof. Dr.-Ing. U. Grigull zum 75. Geburtstag gewidmet     

Additive functions

1<q<2 L:= _n=1 1/q ⁿ=1/q–1. [0,1] _n()=1, A _n:= _i=1 ^n–1 _i(x)/q^i+1/n x _n(x)=0, _n>. , = _{n=1 n}(x)/qⁿ. F: [0,L]R , F(x)= _{n=1 n}(x)a_n, _n=1 ¦a _n¦<. [0,L]. q(1,2), . , q(1, 2), . .     

Pore Structure Analysis of Porous Particles by Equivalent Model

Starting from Wheeler's composite theory, which takes both the multilayer adsorption and the capillary condensation into consideration, and assuming the equivalent cylindrical model, we have deduced a strict and relatively simpler formula for the calculation of pore size distribution by solving the integral equation directly. The formula is more convenient for application because of its recursion form. Following the same line of reasoning and using the mean value theorem of definite integrals under different conditions, we have unified the equations of Barrett-Joyner-Halenda, Dubinin, Cranston-Inkley, Dollimore-Heal and Roberts. A table of parameters which is required in the calculation is given. Besides the adsorption of nitrogen, the adsorption with water vapor as the adsorbate is investigated and the corresponding empirical equation of adsorption thickness is given.     

Umsetzung von hydrobromiertem 1,4-Polybutadien mit lithiumorganischen Verbindungen

Ohne ZusammenfassungMit 1 Abbildung und 1 Tabelle     

K2[(UO2)As2O7] – the First Uranium Polyarsenate

Yellowish crystals of K₂[(UO₂)As₂O₇] ( 1 ) have been synthesized by solid‐state reactions method. The structure of 1 [orthorhombic, Pmmn, a = 12.601(2), b = 13.242(2), c = 5.621(1) Å, V = 937.9(3) ų, Z = 4] has been solved by direct methods and refined to R₁ = 0.049, wR₂ = 0.1060 for 1059 observed reflections. The structure of 1 is based upon [(UO₂)As₂O₇]^2? sheets formed by corner sharing between [UO₆]^6? distorted octahedra and [As₂O₇]^4? polyarsenate groups. The K⁺ cations are either in eightfold or tenfold coordination and are located between the sheets. The topology of the uranyl arsenate sheet is related to silicate minerals of the melilite group and related synthetic silicate, aluminate and germanate compounds.     

One‐Dimensional,Cofacial Porphyrin Polymers Formed by Self‐Assembly of meso‐Tetrakis(ERE Donor) Zinc(II) Porphyrins

A series of meso‐tetrakis‐(ERE donor) zinc(II) porphyrins n Zn (ERE donor=4‐R‐3,5‐bis[(E)‐methyl]phenyl; 1 Zn: E=NMe₂, R=Br; 2 Zn: E=NMe₂, R=H; 3 Zn: E=OMe, R=Br; 4 Zn: E=OMe, R=H) have been synthesized in excellent yields. As a result of the combination of a Lewis acidic site and eight Lewis basic sites within one molecule, monomeric molecules of n Zn self‐assemble to form one‐dimensional porphyrin polymers [ n Zn]_∞ in the solid state, as confirmed for 1 Zn and 3 Zn by X‐ray crystallography. The coordination environment around the zinc(II) ions in these polymers is octahedral. They are ligated by four equatorial nitrogen atoms of the porphyrin and two apical E atoms (E=N, O) provided by the EBrE donor groups of adjacent n Zn molecules. Complexes 2 Zn and 4 Zn did not form single crystals, but solid‐state UV/Vis analysis points to the formation of similar structures. Solution UV/Vis and ¹H NMR spectroscopy indicated that interactions between 1 Zn and 2 Zn monomers in the polymers are stronger than between 3 Zn and 4 Zn monomers. Interestingly, they also revealed that the presence of a neighboring bromine atom in the EBrE donor groups has a considerable influence on the coordination properties of the benzylic N or O atoms. The zinc(II) ions of the porphyrins most likely adopt only hexacoordination in the solid state, owing to the unique predisposition of Lewis acidic and basic sites in the n Zn molecules. Several parameters of the aggregates, for example, the interplanar separation between porphyrins and the zinc–zinc distances, change as a function of the coordinating E groups. The high degree of modularity in their synthesis makes these zinc(II) porphyrins an interesting new entry in noncovalent multiporphyrin assemblies.     

Die Schmelzdiagramme der Systeme CsN3/Zn(N3)2 und KN3/Zn(N3)2

The phase diagrams of the systems CsN₃/Zn(N₃)₂ and KN₃/Zn(N₃)₂ have been obtained employing the microscopic technique ofL. Kofler andA. Kofler. Within the system CsN₃/Zn(N₃)₂ three eutectics at 148°C, 142°C, and 210°C were found. Besides Cs₂Zn(N₃)₄, melting incongruently in the interval 153°C to 170°C, there exist two further compounds of the most probable composition Cs₃Zn₂(N₃)₇ and CsZn₂(N₃)₅, melting congruently at 170°C and 210°C, resp. In the system KN₃/Zn(N₃)₂ there exist two eutectics at 203°C and 172°C and two compounds, one of them, i.e. K₂Zn(N₃)₄, melting congruently at 206°C, the other one, with composition KZn₃(N₃)₇ or KZn₄(N₃)₉, melting incongruently at 210°C.

---

---

Mit 8 Abbildungen

---

Herrn Professor Dr.Heribert Grubitsch zum 70. Geburtstag gewidmet.     

Dynamics of molecular oxygen in micellar solutions

Fluorescence quenching by molecular oxygen has been employed to estimate dynamic parameters and solubility characteristics of molecular oxygen in micelle forming detergent solutions. A kinetic model which assumes that oxygen quenching occurs only in the micellar phase is employed to analyze the data.     

Vernetzung und Abbau von Polyäthylenterephthalat durch Elektronenbestrahlung

Zusammenfassung PÄT-Folien wurden in Luft, Stickstoff und Vakuum bei 20 °C mit 1 MeV-Elektronen bestrahlt. Untersucht wurden Löslichkeit und Viskosität von Proben, die unmittelbar nach der Bestrahlung gelöst wurden.In allen untersuchten Fällen trat bei hohen Bestrahlungsdosen ein unlöslicher, d. h. vernetzter Anteil auf, dessen Ausbildung jedoch durch in den Proben enthaltene Feuchtigkeit verzögert werden kann. Bei niedrigen Bestrahlungsdosen bewirkt Feuchtigkeit einen Abbau des Polymeren, wie durch Viskositätsmessungen gezeigt wird.Aus den Gel-Messungen wurde derp ₀/q ₀-Wert für Bestrahlung in Luft, Stickstoff und Vakuum zu 1,05 bestimmt.Die Änderung des Gel-Anteils bei Lagerung der Proben zwischen Bestrahlung und Lösung wird diskutiert.

---

Summary Polyethyleneterephthalate samples were irradiated in air, nitrogen and vacuum at 20 °C with 1 MeV electrons. The solubility of the samples and the viscosity of the solutions were studied immediately after irradiation. At high doses an insoluble crosslinked part was always observed. Crosslinking was delayed by moisture in the samples. At low irradiation doses moisture causes chain scission as shown by viscosity measurements. The ratiop ₀/q ₀ of degradation to crosslinking in the case of irradiation in air, nitrogen and vacuum was found by gel measurements to be 1.05. The insoluble gel-part changes with increasing storage time of the samples between irradiation and solution.

---

---

Herrn Diplom-PhysikerH. Fischer sei an dieser Stelle für wertvolle Anregungen und Diskussionen besonders gedankt.