制冷型红外成像系统内部杂散辐射测量方法

杂散辐射是红外光学系统设计和检测过程中涉及的一项重要指标.为了定量测量红外成像系统内部杂散辐射, 提出一种基于辐射定标的测量方法, 并通过理论推导和实验验证以说明该方法的合理性.首先, 建立了不带光学系统的辐射定标模型, 即探测器直接接收定标源辐射能, 获得探测器内部因素对系统输出的影响; 然后将其与带有光学系统的定标结果进行比较, 得到由光学系统自身辐射对系统输出的影响, 进而计算红外成像系统内部杂散辐射; 最后通过实验证明了本文理论的正确性.该方法操作简单, 对实验条件要求低, 并可以精确地测量红外成像系统内部杂散辐射.可用于指导红外系统设计中的杂散辐射抑制, 验证系统杂散辐射分析结果是否准确以及检测系统杂散辐射指标是否合格.     

基于神光Ⅲ原型的激光直接驱动自由面准等熵实验研究

长脉冲激光打靶的直接驱动方式效率较高,但对激光强度变化非常敏感。利用测量自由面速度历史的方法对激光直接驱动准等熵压缩实验技术进行了分析,为改进激光直接驱动的准等熵压缩实验技术提供技术基础。介绍了国内在神光III原型装置上首次开展的激光直接驱动自由面准等熵压缩实验。对实验靶型、激光波形、典型实验结果以及实验中的关键技术进行了分析。在激光能量为1000 J的实验中,使用成像型速度干涉仪获得了较为理想的准等熵压缩条纹图。实验发现,自由面速度达到11.3 km/s时,自由面反射的探针光信号消失。通过对比Multi-1D软件的理论模拟数据与实验处理的结果,发现由于Al自由面缺少约束,这类实验会造成波系复杂化的问题,但是对主冲击的研究还是有意义的。对某些特殊材料,在很难找到阻抗匹配窗口的条件下,利用激光直接驱动方式研究材料高压响应特性提供了另一条可实施的技术途径。     

基于STM32F407的以太网通信模块设计

物联网的大规模形成和高速发展,使得基于以太网通信的嵌入式系统开发成为物联网应用的一个实际课题。本论文设计了一种以STM32F407作为主处理器的以太网通信模块;利用32位闪存微控制器STM32F407与以太网模块CH395实现串口通信;采用CH395控制芯片内置的TCP/IP协议栈与上位机LabVIEW客户端建立数据通信,并实时发送测试数据进行实验研究。实测结果表明：基于STM32F407的以太网通信嵌入式系统工作稳定,数据传输可靠,能够满足系统设计需求。     

Study on measurement of dispersive characteristics of higher order mode Lamb waves

The dispersive characteristics of higher order mode Lamb waves (HOMLW) excited by interdigital transducers (IDT) are measured and analyzed, which are necessary for designing micro-sensor in ultrahigh frequency (UHF). A measurement system is set up, in which dispersive characteristics of HOMLW are obtained by the method of transform between frequency and time domains. The characteristics of amplitude-frequency and phase-frequency of Lamb wave are auto-measured by the system. By IFFT, the pulse response of the IDT device was obtained. Different modes were separated in time domain and dispersive curve of each mode is calculated by FFT. The best mode is chosen to design the micro-sensor in UHF. The phase velocity of HOMLW is greater than the surface wave (SAW) velocity and an oscillator in higher frequency can be made, so the absolute sensitivity of micro-sensor can be increased. In this paper, the dispersive characteristics of HOMLW excited by an IDT in a 127.86 degrees rotated Y-cut, X propagating lithium niobate plate is analyzed. An oscillator using a(13) mode is made, the phase velocity of which is measured about 19,652 m/s when h/lambda=0.94 (h=plate thickness, lambda=wavelength).     

Freeze-drying of human platelets: influence of intracellular trehalose and extracellular protectants

Freeze-drying is an ideal alternative for long-term preservation of platelets in blood banks. Intracellular trehalose is believed to be an effective lyoprotectant for preserving cells during freeze-drying. In this study, 13 mM intracellular trehalose was loaded into human platelets through fluid-phase endocytosis pathway. Bovine serum albumin and trehalose were used as extracellular protectants. The effects of intracellular trehalose and extracellular protectants on freeze-dried platelets were studied respectively. The results showed 13 mM intracellular trehalose was beneficial to freeze-dried human platelets, but only slightly enhanced the protection afforded by extracellular protectants. Loaded with 13 mM intracellular trehalose, platelets were freeze-dried in a formulation of 1 percent bovine serum albumin and 1 percent trehalose, 40 days later, the survival rate of rehydrated platelets was about 85 percent, the morphology of rehydrated platelets was intact and the aggregation percentage with thrombin (1 U/ml) was 97.3 percent.     

Coupled polaritonic band gaps in the anisotropic piezoelectric superlattices

Anisotropic piezoelectric superlattices (APSs) with the periodic arrangement of polarized anisotropic piezoelectric domains in a certain direction are presented, in which the coupled polaritonic band gaps (CPBGs) can be obtained in the whole Brillouin Zone and the maximum relative bandwidth (band-gap sizes divided by their midgap frequencies) of $5.1\text{\%}$ can be achieved. The general characteristics of the APSs are similar to those of the phononic crystals composed of two types of materials, with the main difference being the formation mechanism of the CPBGs, which originate from the couplings between lattice vibrations along two different directions and electromagnetic waves rather than from the periodical modulation of density and elastic constants. In addition, there are no lattice mismatches because the APSs are made of the same material. Thus, the APSs can also be extended to the construction of novel acousto-optic devices.     

Action detection by double hierarchical multi-structure space–time statistical matching model

Aimed at the complex information in videos and low detection efficiency, an actions detection model based on neighboring Gaussian structure and 3D LARK features is put forward. We exploit a double hierarchical multi-structure space–time statistical matching model (DMSM) in temporal action localization. First, a neighboring Gaussian structure is presented to describe the multi-scale structural relationship. Then, a space–time statistical matching method is proposed to achieve two similarity matrices on both large and small scales, which combines double hierarchical structural constraints in model by both the neighboring Gaussian structure and the 3D LARK local structure. Finally, the double hierarchical similarity is fused and analyzed to detect actions. Besides, the multi-scale composite template extends the model application into multi-view. Experimental results of DMSM on the complex visual tracker benchmark data sets and THUMOS 2014 data sets show the promising performance. Compared with other state-of-the-art algorithm, DMSM achieves superior performances.     

Facile route to high-density, ordered ZnO nanowire arrays and their photoluminescence properties

A simple template-directed wet chemistry route based on traditional thermal decomposition technique has been developed for the preparation of high-density, ordered ZnO nanowire arrays. The fabrication was performed at relative low temperature without involving complex procedures, sophisticated equipment and rigorous experiment conditions, thereby providing a straightforward and mild method to produce metal/metal oxide ordered nanostructures. The nanowire array system was evaluated by SEM, XRD, TEM and PL. A stable luminescence at 425 nm was present.     

基于自发参量下转换源二阶激发过程产生四光子超纠缠态

目前,多光子纠缠态的制备大多通过线性光学器件演化自发参量下转换一阶激发过程产生的纠缠光子对得到.本文考虑由自发参量下转换源二阶激发产生四个不可区分的纠缠光子制备四光子超纠缠态的情况.通过几组分束器、半波片和偏振分束器等线性光学器件设计量子线路演化四光子系统,结合四模符合探测,可得到同时具有偏振纠缠和空间纠缠的四光子超纠缠态.     

高对比度紫外电光削波开关

采用电光开关产生短脉冲的技术,建立了一种抑制准分子激光放大链自发辐射放大(ASE)的方法,研制了高对比度紫外电光削波开关,并进行了原理性实验,将其应用于准分子单路主振荡功率放大系统第一级预放大器的ASE控制。实验中电光开关对比度达到了2000多,削波后的预放大器输出激光脉冲信号对比度提高至20 000多,有利于激光信号后续进一步高保真放大,为系统获得窄脉冲输出提供了技术支持。