牙齿化石中由辐照产生的陷阱电子的热稳定性研究

本文对周口店北京猿人遗址的动物牙齿化石进行了辐照产生的陷阱捕获电子的热稳定性研究和釉质样品及牙质样品的热稳定性对比实验。得到釉质样品中g=2.0016 ESR峰的寿命为7.1×10⁶年(20℃)。说明了取该峰进行ESR年代测定的可信性和用釉质样品进行ESR年代测定的必要性。     

Influence of preparation methods on structure and properties of PA6/PA66 blends: A comparison of melt‐mixing and in situ blending

The blends composed of polyamide 6 (PA6) and polyamide 66 (PA66) were obtained using two different preparation methods, one of which was the melt‐mixing through a twin‐screw extruder and the subsequent injection molding; and the other, the in situ blending through anionic polymerization of ε‐caprolactam in the presence of PA66. For the former, there existed a remarkable improvement in toughness but a drastic drop in strength and modulus; however, for the latter, a reverse but less significant trend of mechanical properties change appeared. Various characterizations were conducted, including the analyses of crystalline morphology, crystallographic form, and crystallization and melting behaviors using polarized optical microscopy (POM), wide‐angle X‐ray diffraction (WAXD), and differential scanning calorimetry (DSC), respectively; observation of morphology of fractured surface with scanning electron microscope (SEM); measurement of glass transition through dynamic mechanical analysis (DMA); and the intermolecular interaction as well as the interchange reaction between the two components by Fourier transform infrared spectrometry (FT‐IR) and ¹³C solution NMR. The presence and absence of interchange reaction was verified for the in situ and melt‐mixed blends, respectively. It is believed that the transreaction resulted in a drop in glass transition temperature (T_g) for the in situ blends, contrary to an increase of T_g with increasing PA66 content for the melt‐mixed ones. And the two kinds of fabrication methods led to significant differences in the crystallographic form, spherulite size and crystalline content and perfection as well. Accordingly, it is attempted to explain the reasons for the opposite trends of changes in the mechanical properties for these two blends. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1176–1186, 2007     

Trefftz,collocation, and other boundary methods—A comparison

In this article we survey the Trefftz method (TM), the collocation method (CM), and the collocation Trefftz method (CTM). We also review the coupling techniques for the interzonal conditions, which include the indirect Trefftz method, the original Trefftz method, the penalty plus hybrid Trefftz method, and the direct Trefftz method. Other boundary methods are also briefly described. Key issues in these algorithms, including the error analysis, are addressed. New numerical results are reported. Comparisons among TMs and other numerical methods are made. It is concluded that the CTM is the simplest algorithm and provides the most accurate solution with the best numerical stability. © 2006 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq, 2007     

Four-wave mixing based 10-Gb/s tunable wavelength conversion in dispersion-flattened microstructure fibers

All-optical wavelength conversion of 10-Gb/s signal based on four-wave mixing is experimentally demonstrated in a 30-m-long dispersion-flattened microstructure fiber with small positive dispersion. For an average pump power of 26 dBm, the conversion efficiency was around -19.5 dB with the fluctuation less than ±1.4 dB, covering a conversion bandwidth of 20 nm. The eye diagram of the converted signal shows good eye opening.     

Synthesis and magnetic properties of multilayer Ni/Cu and NiFe/Cu nanowires

Highly ordered composite nanowires with multilayer Ni/Cu and NiFe/Cu have been fabricated by pulsed electrodeposition into nanoporous alumina membrane. The diameter of wires can be easily varied by pore size of alumina, ranging from 30 to 100 nm. The applied potential and the duration of each potential square pulse determine the thickness of the metal layers. The nanowires have been characterized by transmission electron microscopy (TEM), magnetic force microscopy (MFM), and vibrating sample magnetometer (VSM) measurements. The MFM images indicate that every ferromagnetic layer separated by Cu layer was present as single isolated domain-like magnet. This technique has potential use in the measurement and application of magnetic nanodevices.     

微纳米加工技术及其应用综述

材料与结构在微纳米尺度展现了许多不同于宏观尺度的新特征，纳米技术已经成为当前科学研究与工业开发的热门领域之一。微小型化依赖于微纳米尺度的功能结构与器件，实现功能结构微纳米化的基础是先进的微纳米加上技术，文章对微纳米加上技术做了一个综合的介绍，简要说明了微纳米加工技术与传统加工技术的区别，在微纳米加工技术的应用方面提出了一些合理选择加工技术的原则，并对当前微纳米加工技术面临的挑战和今后发展的趋势作了预测。     

乌鲁木齐市商业中心的等级体系及合理布局的探讨

本文利用85年5—6月间对乌鲁木齐市主要商业区及部分中、小商业区的实地调查资料,对乌市商业中心等级系统进行了定性和定量的分级分类,将全市商业中心划分为五个等级,八组商业中心,对已形成的商业中心分布现状进行了初步探讨,并对今后商业网点的合理布局提出了建议。     

Optimal production and rationing decisions in supply chains with information sharing

This paper considers a two-echelon capacitated supply chain with two non-identical retailers and information sharing. We characterize the optimal inventory policies. We also study the benefits of the optimal stock rationing policy over the first come first served (FCFS) and the modified echelon-stock rationing (MESR) policies.