The relation between the molecular weight and intrinsic viscosity of polymethyl acrylate

Summary A series of unfractionated and fractionated samples of polymethyl acrylate of different low molecular weights have been prepared by homogeneous solution. polymerization in dimethyl formamide in presence of , '-azo-(-cyano-n-valeric acid) as initiator under a variety of conditions. The number-average molecular weights have been determined by end-group titrations and vapour pressure osmometry. The following []-M relationships for polymethyl acrylate have been obtained.[] = 33.5 x 10^–5M^0.63 for unfractionated samples in benzene at 25 °C. [] = 3.89 x 10^–5M^0.843 for fractionated samples in benzene at 35 °C.With 2 tables     

Synthesis and applications of poly(acryl<Emphasis Type="Italic">p</Emphasis>-aminobenzenesulfonamideamidine-<Emphasis Type="Italic">p</Emphasis>-aminobenzenesulfonylamide) chelating fiber for pre-concentrating and separating trace Bi(III), Hg(III), Au(III) and Pd(IV) from solution samples

Poly(acrylp-aminobenzenesulfonamideamidine-p-aminobenzenesulfonylamide) chelating fiber containing "S", "N", and "O" elements was synthesized from polyacrylonitrile fiber and p-aminobenzene sulfonamide and used to enrich and separate trace Bi(III), Hg(III), Au(III), and Pd(IV) ions from wastewater and ore sample solution. The enrichment acidity, flow rate, elution conditions, reuse, interference ions, saturated adsorption capacity, constant of adsorption rate, analytical accuracy, and actual samples on chelating fiber were investigated by means of inductively coupled plasma optical emission spectrometry (ICP-OES) with satisfactory results. Solutions of 100 ng mL^–1 of Bi(III), Hg(III), Au(III), and Pd(IV) ions can be enriched quantitatively by this chelating fiber at a rate of 1.0 mL min^–1 at pH 4 and desorbed quantitatively with 20 mL of 0.25 M HCl and 2% CS(NH₂)₂ solution at 50 °C (with recovery 97%). When the chelating fiber was reused for 20 times, the recoveries of the analyzed ions enriched by the fiber were still over 95% (except for Hg(III)). One thousand-fold excesses of Mn²⁺, Ca²⁺, Zn²⁺, Mg²⁺, Fe³⁺, Cu²⁺, Ni²⁺, Al³⁺, and Ba²⁺ ions and thousands-fold excesses of Na⁺ and K⁺ cause little interference in the pre-concentration and determination of the analyzed ions. The saturated adsorption capacity of Bi(III), Hg(III), Au(III), and Pd(IV) was 4.850×10^–4, 3.235×10^–4, 2.807×10^–4, and 3.386×10^–4 mol g^–1, respectively. The constants of adsorption rate were 0.409 min^–1 for Bi, 0.122 min^–1 for Hg, 0.039 min^–1 for Au, and 0.080 min^–1 for Pd. The relative standard deviations (RSDs) for the enrichment and determination of 10 ng mL^–1 Bi(III), Hg(III), Au(III), and Pd(IV) were lower than 2.3%. The results obtained for these ions in actual samples by this method were basically in agreement with the given values with average errors of less than 1.0%. FT-IR spectra shows that the existence of –SO₂–Ar, –H₂N–Ar, O=C–NH–, HN=C–NH–, and –HN–SO₂ functional groups are verified in the chelating fiber. From the FT-IR spectroscopy, we can see that Hg(III), Au(III), and Pd(IV) are mainly combined with nitrogen and sulfur (or oxygen), and Bi(III) is mainly combined with nitrogen (or oxygen) of the groups to form a chelating complex.     

Catalytic Active Site for NO Decomposition Elucidated by Surface Science and Real Catalyst

Comprehensive studies combining surface science and real catalyst were performed to get further insight into catalytic active site and reaction mechanism for NO decomposition over supported palladium and cobalt oxide-based catalysts. On palladium single-crystal model catalysts, adsorption, dissociation and desorption behavior of NO was found to be closely related to the surface structures, the stepped surface palladium being active for dissociation of NO. In accordance with this result, the activity of powder Pd/Al₂O₃ catalysts for NO decomposition was directly related to the number of step sites exposed on the surface, suggesting that the step sites act as the catalytic active site for NO decomposition on Pd/Al₂O₃. NO decomposition over cobalt oxide was found to be significantly promoted by addition of alkali metals. Surface science study and catalyst characterization led to the same conclusion that the interface between the alkali metal and Co₃O₄ serves as the catalytic active site. From the results of in situ Fourier transform infrared (FT-IR) spectroscopy and isotopic transient kinetic analysis, a reaction mechanism was proposed in which the reaction is initiated by NO adsorption onto alkali metals to form NO₂⁻ species and then NO₂⁻ species react with the adsorbed NO species to form N₂ over the interface between the alkali metal and Co₃O₄.     

The state of conservation of painted surfaces in the presence of accelerated ageing processes monitored by use of FT-Raman spectroscopy and multivariate control charts

A new method has been developed for monitoring the degradation of paintings. Two inorganic pigments (ultramarine blue and red ochre) were blended with linseed oil and spread on canvas. Each canvas was subjected to simulated accelerated ageing in the presence of typical degradation agents (UV radiation and acidic solution). Periodically the painted surfaces were analysed by FT-Raman, to investigate the status of the surface. The data obtained were analysed by principal component analysis (PCA). Finally the Shewhart and cumulative sum control charts based on the relevant principal components (PC) and the so called scores monitoring and residuals tracking (SMART) charts were built. The method based on the use of PC to describe the process was found to enable identification of the presence of relevant modification occurring on the surface of the samples studied.Electronic supplementary material Supplementary material is available for this article at     

Synthesis and characterization of a bifunctional amido-thiophene monomer and its copolymer with thiophene and electrochemical properties

A bifunctional amido-thiophene namely hexamethylene (bis-3-thiophene acetamide) (HMTA) was synthesized by the reaction of 3-thiophene acetic acid with hexamethylene diamine. Copolymerization in the presence of thiophene was achieved electrochemically in tetrabutylammonium tetrafluoroborate/acetonitrile (TBAFB/AN). Spectroelectrochemical analysis of the resulting copolymer [P(HMTA-co-Th)] reflected electronic transitions at 505 nm, 740 nm and ∼1000 nm, revealing π to π* transition, polaron and bipolaron band formation respectively. Switching ability was evaluated by a kinetic study via measuring the transmittance (%T) at the maximum contrast. Dual type polymer electrochromic devices (ECDs) based on P(HMTA-co-Th) and poly(ethylene dioxythiophene) (PEDOT) have been constructed. Spectroelectrochemistry, switching ability and stability of the devices were investigated by UV-vis spectroscopy and cyclic voltammetry. These devices exhibit low switching voltages (between 0.0 V and +1.6 V), short switching times with reasonable switching stability under atmospheric conditions.     

A Bloembergen–Purcell–Pound <Superscript>13</Superscript>C NMR relaxation study of the ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate

The molecular structure and rotational motion of the ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF6]) were studied over a wide temperature range using the Bloembergen–Purcell–Pound ¹³C NMR spin–lattice relaxation method and NOE factors. Examination of the spin–lattice relaxation times (T ₁) and the rates (R ₁=1/T ₁) of the 1-butyl-3-methylimidazolium cation reveals the relative motions of each carbon in the imidazolium cation. The rotational characteristics of the [BMIM] cation are supported by ab-initio molecular structures of [BMIM][PF6] using density functional theory (DFT) and Hartree–Fock (HF) methods. The ab-initio gas phase structures of [BMIM][PF6] indicate that the 1-butyl-3-methylimidazolium C2 hydrogen, the ring methyl group, and the butyl side-chain hydrogen atoms form hydrogen bonds with the hexafluorophosphate anion.     

Synthesis of [18,19,21,22‐13C4]‐Labeled Tautomycin as an NMR Probe of Protein Phosphatase Inhibitor

We have accomplished the synthesis of ¹³C‐labeled tautomycin at the C18, C19, C21, and C22 positions starting from 100 % [¹³C]triethylphosphonoacetate for the purpose of elucidating the dynamics and conformation of the C17–C26 moiety. NMR spectroscopy of ¹³C‐labeled tautomycin revealed strong binding with protein phosphatase type 1 and new features in the ¹³C NMR spectrum, such as the very small three‐bond coupling constants (²J).     

Structural Study of Alkaline 1-Phenyl-1H-1, 2, 3, 4-tetrazole-5-thiolate Salts: An Example of Periodicity in Alkaline Cations

The alkaline 1-phenyl-1H-1, 2, 3, 4-tetrazole-5-thiolate salts, M[C₆H₅N₄CS] (M = Li ( 1 ), Na ( 2 ), K ( 3 ), Rb ( 4 ) and Cs ( 5 )) were obtained and characterized by means of mass spectrometry (FAB⁺) and NMR (¹H; ¹³C) spectroscopy. The structures of Na ( 2 ), K ( 3 ), Rb ( 4 ) and Cs ( 5 ) compounds were determined by X-ray diffraction methods. The ligand shows a rich variety of coordination patterns with the alkaline cations. The formation of a four-membered ring MSCN in the compounds with heavier alkali cations (K, Rb and Cs) is shown. In all the cations the coordination number around it increases with the ionic radius. Compounds with Cs⁺ and Rb⁺ exhibited the formation of Cs-C and Rb-C interactions with the phenyl group.     

Photochemical reactions of M(CO)6 (M = Cr,Mo, W) with Ph2P(S)P(S)Ph2

New complexes {M(CO)₄[Ph₂P(S)P(S)Ph₂]} (M = Cr, Mo and W), (1a)–(3a), [(1a), M = Cr; (2a), M = Mo; (3a), M = W] and {M₂(CO)₁₀[-Ph₂P(S)P(S)Ph₂]} (M = Cr, Mo, W), [(1b)–(3b) [(1b), M = Cr; (2b), M = Mo; (3b), M = W]] have been prepared by the photochemical reaction of M(CO)₆ with Ph₂P(S)P(S)Ph₂ and characterized by elemental analyses, f.t.-i.r. and ³¹P-(¹H)-n.m.r. spectroscopy and by FAB-mass spectrometry. The spectra suggest cis-chelate bidentate coordination of the ligand in {M(CO)₄[Ph₂P(S)P(S)Ph₂]} and cis-bridging bidentate coordination of the ligand between two metals in (M = Cr, Mo and W).