Identification of dislocations and their influence on the recombination of charge carriers in gallium nitride

The relation between the density of etch pits revealed in GaN by etching in a KOH/NaOH eutectic and the density of dislocations determined by transmission electron microscopy (TEM) is studied along with the relation between the density of dislocations and the density of dark spot defects observed in GaN by microcathodoluminescence (MCL) and electron-beam-induced current (EBIC). It is demonstrated that selective etching is a reliable rapid method for the determination of the type and density of dislocations in GaN in the range 10⁶–10⁸ cm^?2, while MCL and EBIC can be used for the rapid nondestructive determination of the density of dislocations in the range 10⁶–10⁸ cm^?2. It is also found that some deep electron and hole traps are related to dislocations.     

Polygaussian Approximation and Adaptive Processing of an Electrocardiographic Signal Against Interference Background

We present the results of a study and substantiation of the method of polygaussian approximation of an electrocardiographic (ECG) signal against interference background during computer analysis of that signal. It is proposed to use adaptive processing of ECG signals, which allows one to increase the signal-to-interference ratio by over 7 dB.     

Features of polystyrene synthesis in the presence of (diphenylbutadiene)tricarbonylchromium

Features of radical polymerization of styrene in the presence of (diphenylbutadiene)tricarbonylchromium were studied.     

Recovery of Butadiene-Styrene Rubber from Latex at Low Temperature with Various Coagulants

The influence of the charge of a metal cation and the nature of a coagulant on the recovery of butadiene-styrene rubber and properties of rubber stocks and vulcanizates was examined.     

Anodic stripping coulometry with collection for absolute trace analysis of lead, using flow-through electrochemical cells with porous working electrodes

Summary Flow-through electrochemical cells with porous working electrodes made of crushed reticulated vitreous carbon and plated with mercury were used for absolute analysis of trace amounts of lead by anodic stripping coulometry with collection (ASCWC) in a flow system. The role of mercury coating, flow rate and pH were investigated. The coulombic content of the collection peak corresponded to the theoretical values calculated by Faraday's law in a concentration range from about 10^–9 to 10^–6 mol/l. The relative error and the relative standard deviation was +0.15% and 0.8%, respectively for 2×10^–6 mol/l analyte concentration. The absolute detection limit (3 s) was 0.1 ng of Pb, the linear response range 7×10⁴. One leave from: Department of Analytical Chemistry, Slovak Technical University, CS-812 37 Bratislava, Czechoslovakia     

ESTIMATE OF THE UPPER CRITICAL FIELD AND CONCENTRATION FOR SUPERCONDUCTOR

The effect of an applied magnetic field on an inhomogeneous superconductor is studied and the value of the upper critical magnetic field Hc3 at which superconductivity can nucleate is estimated. In addition, the authors locate the concentration of the order parameter, which depends on the inhomogeneous term a(x). Unlikely to the homogeneous case, the order parameter may concentrate in the interior of the superconducting material, due to the influence of the inhomogeneous term a(x).     

Relation between the Hydrodynamic and Elastic Parameters in Surface Wave Diffraction on a Floating Plate

The problem of surface wave diffraction on a floating elastic plate is considered. The relation between the parameters of the elastic vibrations of the plate and the transmitted and reflected wave amplitudes is investigated. It is shown that the maximum amplitudes of the plate stresses and deflections depend nonmonotonically on the incident wave frequency and are reached simultaneously with the maxima of both the transmission coefficient and the length of the wave penetrating into the plate. This makes it possible to use the transmission coefficient as a parameter for investigating the maximum and minimum amplitudes of the hydroelastic vibrations of the plate. As an example, this criterion is used to minimize the vibrations of a plate whose leading edge is elastically connected to the bottom.     

Crystal and molecular structures of 1-[3-(3,4-dimethoxyphenyl)-2-propenoyl]pyrrolidine.

The crystal structure of 1-[3-(3,4-dimethoxyphenyl)-2-propenoyl]pyrrolidine (C15H19NO3) (I) has been determined by X-ray analysis. It crystallizes orthorhombic space group Pbca with a = 24.295(3), b = 15.086(3), c = 7.552(3)A, V = 2768(1)A3, Z = 8, Dcalc = 1.254 g/cm3, mu = (Mo K(alpha)) = 0.87 cm(-1). The title compound has analgesic activity of cycloaliphatic amine part. The molecule is deviated from planar configuration.