链状[NH3CH2CH2NH3]AgAsS4的溶剂热合成及表征

利用溶剂热方法合成了链状[NH3CH2CH2NH3]AgAsS4,通过单晶X射线衍射技术对其进行了晶体结构分析,该化合物晶体属单斜晶系,空间群C2/c,晶胞参数a=1.35805(8)nm,b=0.65331(3)nm,c=2.27711(9)nm,β=106.42(3)°,Z=8.化合物具有有趣的梯子状双链结构,该阴离子链由AsS4与AgS3共用顶点交替连接而成,有机阳离子在阴离子链之间存在较强的N—H…S氢键.DSC和Tg分析结果表明化合物在200℃以下是稳定的.     

Multicommutation as an environmentally friendly analytical tool in the hydride generation atomic fluorescence determination of tellurium in milk

The aim of this study is to show the advantages of the emerging multicommutation methodology based on the use of solenoid valves for Te determination in milk by hydride generation atomic fluorescence spectrometry (HG-AFS). The delivery of a series of alternating sequential insertions of small volumes of samples and reagents gives rise to new hydrodynamic processes and exciting analytical potentials by controlling the time of flow through the on/off-switched solenoid valves. This drastically reduces the reagent consumption by a factor of 4 and the generation of effluents (590 mL h^–1 instead of 750 mL h^–1 generated by the continuous-mode measurement) and also provides an improvement in the laboratory productivity by an increase of the sample throughput (85 h^–1 compared to 20 h^–1 found in the continuous mode). So, multicommutation is an environmentally and economically sustainable alternative to the methodology based on continuous measurements. The multicommutation-based method developed was applied to tellurium determination in commercially available milk samples; a calibration range of 0.0–0.5 ng mL^–1 and a detection limit of 0.20 ng L^–1 with average relative standard deviation of 2.1% were found. Comparable results were obtained for a series of samples using both continuous and multicommutation HG-AFS modes.     

Insight into the extractability of metals from soils using an implementation of the linear adsorption isotherm model

This paper deals with an often overlooked artifact in sequential and single extraction of metals from soils, viz. the volume to mass (V/m) ratio as a potential source for inadequate extraction yields. We offer a theoretical framework to get a grip on this intricate parameter and came up with a model based on a linear adsorption isotherm to derive the correct maximal metal extractability for a certain extractant. We verified the model experimentally using 0.1 mol l⁻¹ nitric acid for extraction of seven metals (Cr, Co, Cu, Cd, Pb, Ni and Zn) from an urban soil sample, and concluded that commonly used V/m ratios in the range of 10-40 ml g⁻¹ may give as much as 50% too low extraction yields. Thus, a strong caveat is in place as to be very critical what V/m ratios to use and preferably apply the model derived to obtain the correct maximal extractability using a variable V/m ratio method.     

金刚烷甲酸稀土(Nd(Ⅲ), La(Ⅲ))配合物[LnL3(HL)(H2O)]2·2EtOH·2H2O的合成和晶体结构

合成了金刚烷甲酸与稀土Nd(Ⅲ)和La(Ⅲ)离子配合物, 并测定了配合物的晶体结构. 配合物的组成为[LnL3(HL)(H2O)]2·2EtOH·2H2O (Ln=Nd (1), La (2), HL=金刚烷甲酸). 配合物晶体均属三斜晶系, 空间群为P1, 晶胞参数 配合物(1) a=1.0556(2) nm, b=1.4913(3) nm, c=1.4920(3) nm , α=106.26(3)°, β=93.51(3)°, γ= 97.23(3)°, V=2.2253(5) nm3, Dcal=1.409 g·cm-3, Z=1, F(000)=990, μ(Mo Kα)=1.225 mm-1, Mr=1888.54. 配合物(2) a=1.0453(2) nm, b=1.4971(3) nm, c=1.5052(3) nm, α=106.07(3)°, β=93.58(3)°, γ=97.56(3)°, V=2.2391(5) nm3, Dcal=1.397 g·cm-3, Z=1, F(000)=984, μ(Mo Kα)=1.015 mm-1, Mr=1877.88. 两个配合物属异质同晶, 呈双核结构, Ln(Ⅲ)为九配位, 形成畸变三帽三棱柱配位多面体.     

Preconcentration using diethylenetriaminetetraacetic acid-functionalized polysiloxane (DETAP) for determination of molybdenum(VI) in seawater by ICP–OES

This paper reports a new method for preconcentration and separation of trace amounts of molybdenum in seawater samples prior to determination by inductively coupled plasma–atomic emission spectroscopy (ICP–OES). Diethylenetriaminetetraacetic acid-functionalized polysiloxane (DETAP) was synthesized by carboxymethylation of amino groups on triamine immobilized polymer, which was prepared by modification of 3-chloropropylpolysiloxane with diethylenetriamine. The resulting polysiloxane is highly selective and efficient in chelating Mo(VI) at trace levels. It can be used as a column packing material. The polysiloxane column can be reused over ten times without losing its original properties, so it is suitable for preconcentration of molybdenum species in seawater samples before determination. The parameters governing the characteristics of polysiloxane for adsorption of Mo(VI) were investigated. These include the effect of pH, amount of polysiloxane, equilibrium time, adsorption isotherm, maximum adsorption capacity, interfering ions, flow rate, capacity for reuse, and desorption. The precision of the preconcentration method, calculated as the relative standard deviation of seawater samples, was 3%. The preconcentration factor was 100. The detection limit, defined as 3 times the standard deviation of five replicate measurements of the blank sample at pH 3, was 0.17 g L^–1. Measurement results for standard reference materials were in good agreement with the certified values [(CRMs), NASS-2 Seawater (Open Ocean) and CASS-2 Seawater (Coastal)].     

Evaluation of glycoalkaloids in tubers of genetically modified virus Y-resistant potato plants (var. Désirée) by non-aqueous capillary electrophoresis coupled with electrospray ionization mass spectrometry (NACE–ESI–MS)

The glycoalkaloid content of transgenic potatoes was evaluated by an optimised method based on non-aqueous capillary electrophoresis coupled on-line with electrospray ionization-mass spectrometry (NACE-ESI-MS). The potato material consisted of tubers from a conventional cv. Désirée and from three lines of modified plants resistant, intermediate and susceptible to infection by potato virus Y (PVY). The main glycoalkaloids were confirmed to be alpha-solanine and alpha-chaconine with parent ion masses m/z 852 and 868, respectively. In addition, an unknown minor peak at m/z 850.6 was found both in conventional (control) and susceptible line potato tubers. Such a compound exhibited an MS(2) spectrum with fragments ions at 704 and 396 m/z derived by loss of two ions, i.e. m/z 146 and 307, most likely corresponding to a rhamnose unit and a [glucose-(rhamnose)(2)] moiety, respectively. Up to 30-80-fold higher concentrations of total glycoalkaloids were found in the peel compared to flesh samples of all tubers examined. TGA content was nearly doubled in peel samples of resistant compared to control lines, and these levels were lower than the limit recommended for food safety, i.e. 20-60 mg of TGA per 100 g fresh weight. Moreover, it was established that tubers produced by virus-resistant clones are substantially equivalent in glycoalkaloid contents to those produced by conventional potato varieties.     

过碳酸钠-醋酸酐作用下的Baeyer-Villiger反应

在醋酸酐介质中, 过碳酸钠可以与酮进行Baeyer-Villiger反应, 将它们氧化成相应的酯。其中脂环酮的反应结果较好, 环内酯的产率约为80%。芳香酮除芳环被活化的以外, 效果欠佳。当反应施加超声辐射后可显著加快反应速度, 并对过碳酸钠的作用机理进行了讨论。     

Dynamic equilibrium of ion exchange in the system lead-cation exchanger at different temperatures

Summary The relationship between the ion-exchange reaction in a column and temperature was examined in the system lead-ion exchanger resin Lewatit S 1080. Lead binding was performed with 0.01 mol/l HNO₃ and elution with 4.0 mol/l HCl. The working temperature was gradually increased from 273 to 333 K. Thermostat columns were of own construction. The results were statistically analysed and graphically presented and the parameters obtained for elution curves were related to temperature. The elution curves were found to be temperature specific. The parameters such as elution band width, distribution factor, maximal volume of the eluate, maximal lead concentration in the eluate, confirmed this fact. At higher temperatures, larger volumes of elution solution were required for the elution of the same quantity of lead.

---

Ionenaustausch im System Blei-Kationischer Austauscher bei verschiedenen Temperaturen

     

The effect of UV-irradiation on composting of polyethylene modified by cellulose

LDPE and its blend with cellulose, obtained by extrusion, were UV-irradiated with different doses or biodegraded in soil up to 1 year. Simultaneously, the same samples were 1 year biodegraded after 20 h UV pre-irradiation in the same conditions. The course of photo- and biodegradation was monitored by estimation of average molecular weights and polydispersity, gel amount, changes of PE crystallinity and mechanical properties. Moreover, the biodegradation degree was calculated on the basis of carbon dioxide evolved and surface morphological changes were observed by SEM. It was found that biodegradation of PE + cellulose is hampered by intermolecular crosslinking of both components. Although, the rate of decomposition of PE + cellulose blends is low it is enough for disintegration of such materials in the natural environment.     

梅州农村饮用水重金属元素监测与分析

对梅州农村饮用水中的重金属元素进行了监测和分析，选择Fe，Mn，Zn，Cu，Ag，Pb，Cd七种元素为检测指标。从实验结果来看，Cu，Ag，Cd含量低，未超标；Fe，Mn，Zn，Pb有超标现象：按其危害程度，Pb，Mn的超标是急需解决的问题。