Measurement of the dynamic elastic constants of short isotropic cylinders

A method based on a single test is proposed to characterize the elasticity of an isotropic homogeneous material in the shape of a cylinder of any slenderness (length-diameter) ratio. Firstly, the Rayleigh-Ritz method is used to determine the natural frequencies of the cylinders vibrating axisymmetrically. The study is focused on cylindrical samples with diameter and length of similar magnitude so that the shear modulus and the Poisson ratio can be calculated simultaneously. Subsequently, the theoretical results for cylinders of slenderness ratio between 0.1 and 3 are analyzed in order to obtain the data required to determine the elastic constants from one of the two lowest measured natural frequencies and their quotient. The analysis of the results demonstrates that any slenderness ratio is useful in the calculation of the elastic constants, although in some cases the third natural frequency should be used. Furthermore, the influence of the length-diameter quotient on the sensitivity of the method is analyzed by evaluating the systematic uncertainties for both dynamic elastic constants. Finally, the method is experimentally tested by characterizing two steel cylinders with slenderness ratios 0.1 and 1, respectively. The results demonstrate that uncertainties for both Poisson ratio and the shear modulus are smaller when the slenderness ratio is 1.     

Asymptotically balanced schemes for non-homogeneous hyperbolic systems – application to the Shallow Water equations

In this work we introduce a class of balanced numerical schemes, up to second order, for the solution of general non-homogeneous hyperbolic systems of conservation laws. We give a general technique to build such schemes. We also prove that they balance up to second order a large class of steady solutions in the whole domain but some subset whose measure tends to zero as the grid size decreases to zero. We finally present an application to Shallow Water equations that exhibit the good performances of some of the schemes introduced. To cite this article: T. Chacón Rebollo et al., C. R. Acad. Sci. Paris, Ser. I 338 (2004).     

Measurement of the K α to L α and K β to L β intensity ratios of seven elements in the atomic number range 52≤ Z ≤62 using photoionization at 59.5 keV1

The Kα to Lα and Kβ to Lβ intensity ratios of seven elements have been measured following photoionization at 59.5 keV by using a Si (Li) detector (FWHM=155 eV at 5.96 keV). The intensity ratios were determined by measuring K and L x-rays emitted from a standard target of a given element. The theoretical values of the Kα to Lα and Kβ to Lβ intensity ratios were calculated using theoretically tabulated values of shell/subshell photoionization cross sections, fluorescence yields, Coster-Kronig transition probabilities, and radiative decay rates for ηKLi≠ and ηKLi=0. The measured values are in good agreement with theoretical results. From Optika i Spektroskopiya, Vol. 97, No. 2, 2004, pp. 186–189. Original English Text Copyright ? 2004 by A. Kü?ük?nder, S?ğüt, E. Kü?ük?nder, Büyükkasap. This article was submitted by the authors in English.     

Hysteresis and Eddy-current Relaxation in SiFe Materials

The rate-dependent effects in metallic ferromagnetic materials with magnetization processes attributed to domain-walls motion were studied. The experimental method for eddy-current relaxation time determination was proposed. Some discrepancies between the data and theoretical predictions were observed and discussed. The origin of these discrepancies is accounted for by the decrease of viscous-type relaxation process as the rate of change of averaged magnetization is approaching zero.     

Combined intra-intermolecular criss-cross cycloaddition of a new fluorinated unsymmetrical allenylazine with alkynes

The reaction of a new fluorinated unsymmetrical allenylazine with dimethyl acetylenedicarboxylate and phenylacetylene affords the combined intra-intermolecular criss-cross cycloaddition products, 2,3-disubstituted-1,10-diazatricyclo[5.2.1.0^4,10]deca-2,6-diene derivatives. The products contain three fused five-membered rings with two nitrogen atoms within an unsaturated heterocyclic system. The structures were assigned using 2D NMR correlations and in the case of the phenylacetylene adduct by X-ray structure analysis.     

Asymptotic properties of computationally efficient alternative estimators for a class of multivariate normal models

Parameters of Gaussian multivariate models are often estimated using the maximum likelihood approach. In spite of its merits, this methodology is not practical when the sample size is very large, as, for example, in the case of massive georeferenced data sets. In this paper, we study the asymptotic properties of the estimators that minimize three alternatives to the likelihood function, designed to increase the computational efficiency. This is achieved by applying the information sandwich technique to expansions of the pseudo-likelihood functions as quadratic forms of independent normal random variables. Theoretical calculations are given for a first-order autoregressive time series and then extended to a two-dimensional autoregressive process on a lattice. We compare the efficiency of the three estimators to that of the maximum likelihood estimator as well as among themselves, using numerical calculations of the theoretical results and simulations.     

Lyapunov-type inequalities for nonlinear systems

In this paper, by using elementary analysis, we establish some new Lyapunov-type inequalities for nonlinear systems of differential equations, special cases of which contain the well-known equations such as Emden-Fowler-type and half-linear equations. The inequalities obtained here can be used as handy tools in the study of qualitative behaviour of solutions of the associated equations.     

Anodic stripping coulometry with collection for absolute trace analysis of lead, using flow-through electrochemical cells with porous working electrodes

Summary Flow-through electrochemical cells with porous working electrodes made of crushed reticulated vitreous carbon and plated with mercury were used for absolute analysis of trace amounts of lead by anodic stripping coulometry with collection (ASCWC) in a flow system. The role of mercury coating, flow rate and pH were investigated. The coulombic content of the collection peak corresponded to the theoretical values calculated by Faraday's law in a concentration range from about 10^–9 to 10^–6 mol/l. The relative error and the relative standard deviation was +0.15% and 0.8%, respectively for 2×10^–6 mol/l analyte concentration. The absolute detection limit (3 s) was 0.1 ng of Pb, the linear response range 7×10⁴. One leave from: Department of Analytical Chemistry, Slovak Technical University, CS-812 37 Bratislava, Czechoslovakia     

Hydrophilic and hydrophobic copolymer systems based on acrylic derivatives of pyrrolidone and pyrrolidine

This article deals with the synthesis of hydrophilic methacrylic monomers derived from ethyl pyrrolidone [2‐ethyl‐(2‐pyrrolidone) methacrylate (EPM)] and ethyl pyrrolidine [2‐ethyl‐(2‐pyrrolidine) methacrylate (EPyM)] and their respective homopolymers. For the determination of their reactivity in radical copolymerization reactions, both monomers were copolymerized with methyl methacrylate (MMA), the reactivity ratios being calculated by the application of linear and nonlinear mathematical methods. EPM and MMA had ratios of r_EPM = 1.11 and r_MMA = 0.76, and this indicated that EPM with MMA had a higher reactivity in radical copolymerization processes than vinyl pyrrolidone (VP; r_VP = 0.005 and r_MMA = 4.7). EPyM and MMA had reactivity ratios of r_EPyM = 1.31 and r_MMA = 0.92, and this implied, as for the EPM–MMA copolymers, a tendency to form random or Bernoullian copolymers. The glass‐transition temperatures of the prepared copolymers were determined by differential scanning calorimetry (DSC) and were found to adjust to the Fox equation. Total‐conversion copolymers were prepared, and their behavior in aqueous media was found to be dependent on the copolymer composition. The swelling kinetics of the copolymers followed water transport mechanism case II, which is the most desirable kinetic behavior for a swelling controlled‐release material. Finally, the different states of water in the hydrogels—nonfreezing water, freezing bound water, and unbound freezing water—were determined by DSC and found to be dependent on the hydrophilic and hydrophobic units of the copolymers. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 395–407, 2003