On-line preconcentration and determination of mercury in biological samples by flow injection vapour generation inductively coupled plasma atomic emission spectrometry

An FI-ICP-AES method for the determination of trace levels of mercury in biological samples has been described, which is based on the extraction of the mercury complex with 1,5-bis (di-2-pyridyl)methylene thiocarbonohydrazide (DPTH) on-line into isobuthyl-methyl ketone (IBMK). The organic phase (containing the complex) has been mixed on-line with SnCl₂ in N,N-dimethylformamide. Thus, mercury vapour can be generated directly from the organic phase and separated in a gas-liquid separation device. The detection limit for mercury is 4 ng/ml and the calibration curve is linear at least from 10 to 2500 ng/ml. The relative standard deviation for 10 replicate measurements is ±1% for 100 ng/ml of Hg(II). Results from the analysis of some certified biological reference materials are given.     

Synthesis and characterization of the mononuclear oxovanadium-disulphide compound [N(Bu)4][V(O)(S2)2bipy]

Summary The reaction of NH₄VO₃ with S ₂ ^-2 in ammonia in the presence of 2,2-bipyridine (bipy) and [N(Bu)₄]Br gives the mononuclear compound [N(Bu)₄][V(O)(S₂)₂bipy] (1) isolated at room temperature in crystalline form. The X-ray crystal structure determination shows that the vanadium(V) centre is ligated by four sulphur atoms and a nitrogen atom of the bipy ligand forming the equatorial plane of pentagonal bipyramid, an oxygen and the remaining nitrogen atom of the bipy occupying the two apices of the bipyramid.     

Behavior of rifampicin in association with<Emphasis Type="Italic"> β</Emphasis>-cyclodextrin in aqueous media: a spectroscopic and conductometric study

The behavior of rifampicin (D) with -cyclodextrin (-CyD) in aqueous media (W) has been examined by means of UV-vis spectroscopy and conductivity measurements over the temperature range 15–30 °C. The UV-vis study has been used to characterize the systems. The estimated molar absorption coefficient for D/CyD/W system was 10757±280 M^–1 cm^–1 in comparison to the value of 6133±99 M^–1 cm^–1 for D/W system. The conductivity was measured (i) as a function of [D] for binary D/W systems, (ii) as a function of [CyD], keeping the concentration of drug constant, for D/CyD/W system, and (iii) as a function of [D] in the presence of a constant cyclodextrin concentration. Two transition points were observed for D/CyD/W system at constant [CyD], which were assigned as cac-1 and cac-2. The stoichiometry of the association was estimated from the conductivity data. This was obtained from [drug] value at which the change in slope of occurs. The standard free energy change, of aggregation was also calculated from the critical concentration data. An attempt has also been made to estimate the stoichiometry of -cyclodextrin:rifampicin association.     

The structural phase transitions of aminoguanidinium(1+) dihydrogen phosphate—study of crystal structures, vibrational spectra and thermal behavior

Aminoguanidinium(1+) dihydrogen phosphate was prepared by crystallization from aqueous solution. On the basis of the results of DSC measurements, X-ray structural analysis was carried out at temperatures of 160, 215 and 293 K for three aminoguanidinium(1+) dihydrogen phosphate phases ( |Z=2|non-ferroic |melting point 408 K; II |201-222 K|(2) |Z=2|non-ferroic|-; III |<201 K|(2)|Z=4|non-ferroic|-). The triclinic unit cell dimensions (a=6.8220(2), b=7.1000(2), c=7.4500(2) Å, α=86.925(2)°, β=80.731(2)°, γ=79.630(2)°, V=350.21(2) Å³—phase I) are similar for all three structural phases with the exception of phase III, where doubling of the c-axis length leads to an increase in the volume to 692.34(3) Å³. The crystal structure of all three modifications consists of parallel layers of dihydrogen phosphate anions that are interconnected by aminoguanidinium(1+) cations through hydrogen bonds of the N-H…O type. The planar aminoguanidinium(1+) cations are oriented almost parallel to each other and are perpendicular to the anion layers. The primary differences amongst phases I, II and III lie in the location of the H atom in the short O-H…O bonds connecting the dihydrogen phosphate anions in layers. The FTIR and FT Raman spectra of natural and deuterated compounds were recorded and interpreted. The FTIR spectra were studied down to a temperature of 90 K.     

Preparative high-performance liquid chromatography of peptides on a new reversed-phase packing material, Kromasil C18

Preparative reversed-phase high-performance liquid chromatography has found wide use in the production of peptides for pharmaceutical formulations. Purity of the substance and overall economy of the chromatographic system are the most important criterias. In this sense optimized, silica particles and production process with capability to separately control parameters important to chromatography, are essential to high-performance chromatography. Kromasil C18 packing material was tested and evaluated in respect of its selectivity, flow and pressure properties, resolution, load capacity, recovery, adsorption effects, mechanical strength and chemical degradation.     

Ionic Interactions of Calcium Sulfate Dihydrate in Aqueous Sodium Chloride Solutions: Solubilities,Densities, Viscosities,Electrical Conductivities,and Surface Tensions at 35 <Superscript>∘</Superscript>C

The thermodynamic, volumetric, transport, and surface properties, solubilities, densities, viscosities, electrical conductivities, and surface tensions of calcium sulfate dihydrate in aqueous sodium chloride solutions have been measured at 35 C, with a view to determine the ionic interactions that occur in these solutions. The experimental density values have been used to calculate the mean apparent molar volumes of the ternary mixtures. Viscosity values have been analyzed using different empirical equations and the experimental values of the viscosity were combined with conductivity to yield the Walden product. Molar surface energies have been computed using experimental surface tension data. The experimental data have been fitted to polynomial equations by a least-squares analysis to obtain the coefficients and their standard errors. Results have been examined in the light of structure making or structure breaking effects of the various ions present in the solutions.     

Application of Discrete Wavelet Transform in the Analysis of Nonlinear Chemical System

Oscillations of species concentration are phenomena accompanying several types of electrochemical and purely chemical processes. Importance of analyzing of such processes results from both scientific and practical reasons. In the paper the authors deal with investigation of time dependent spectra of various stages of Belousov-Zhabotinsky type chemical oscillations. As the analytical tool the discrete wavelet transform is proposed.     

Flame ionization detection after splitting the water effluent in subcritical water chromatography

The coupling of subcritical water separation with flame ionization detection (FID) in the split mode has been investigated in this study. In order to keep the FID system stable during subcritical water separation, a Tee union was connected between the separation column and the FID system to split the water flow. The ratio of the water flow to the FID system over the flow-rate to a waste bottle varied depending on the dimension of capillary tubings and the total water flow-rate used. Separations of several carbohydrates, carboxylic acids, and amino acids were performed on commercially available columns using a laboratory-made subcritical water chromatography-FID system. The FID system was very stable in this split mode even at total flow-rate as high as 1.24 ml/min. The linear dynamic range was up to three orders of magnitude and the limit of detection (LOD) ranged from 38 to 111 ng (306-925 ng/microl injected) with split ratios of approximately 1:10 to approximately 1:17 (FID/waste bottle) for several analytes studied. However, the LOD can be significantly lowered by adjusting the dimensions of the restrictors to allow a higher percentage of the total flow to the FID system.     

Behaviour of Solochrome Dark Blue B as a colloidal electrolyte

Summary The electrical conductance of Solochrome Dark Blue B at various dilutions and temperatures have been measured. TheWaldens product has been calculated at different temperatures and it varies with the temperature. The reagent has been found to behave as a colloidal electrolyte. The temperature of zero conductance has been determined to be –20 °C and temperature coefficient per degree centigrade per hundred of conductance 35 °C varies between 1.81 and 1.87.

---

Zusammenfassung Die elektrische Leitfähigkeit von Solochrome Dark Blue B bei verschiedener Verdünnung und verschiedenen Temperaturen wurde gemessen, dasWaldensche Produkt bei verschiedenen Temperaturen berechnet. Es variiert mit der Temperatur. Das Reagens benimmt sich wie ein Kolloid. Die Temperatur der Null-Leitfähigkeit wurde zu –20 °C bestimmt und der Temperaturkoeffizient pro Grad in Prozenten der Leitfähigkeit bei 35 °C liegt zwischen 1,81 und 1,87.

---

---

With 2 figures and 3 tables