SPM-induced spectral compression of picosecond pulses in a single-mode Yb-doped fiber amplifier

In a fiber amplifier, spectral compression due to self-phase modulation is demonstrated for ultrashort pulses. We report the generation of near-transform-limited picosecond pulses with peak powers of several kW at a repetition rate of 74 MHz and diffraction-limited beam quality in a Yb-doped fiber amplifier when seeding with a negative chirped pulse. Received: 17 September 2001 / Revised version: 22 November 2001 / Published online: 17 January 2002     

Elasticity in nanocrystalline Nd2Fe14B+αFe magnetic composites

The dynamic Young modulus (E) of magnetic Nd₂Fe₁₄B+αFe nanocomposites is investigated with mechanical spectroscopy techniques (vibrating reed configuration, f≈1.5 kHz <10⁻⁶). Reduced values of E are obtained (88–152 GPa) as compared with that predicted by the rule of mixtures for the composite (164 GPa). Three contributions to this reduction are briefly discussed: a large volume fraction of the specimen with grain boundary like structure; internal pores, resulting from the high cooling rate during processing (10⁶ K/min) and magneto-mechanical effects. Even when porosity is identified as the principal cause of modulus reduction, magnetic effects are also detected.     

Structural transition of the human lymphocyte plasma membrane: an ESR approach

Summary The electron spin resonance spectroscopy and the spin label technique have been used to study the thermotropic structural transition of the plasma membrane ofin toto human peripheral blood lymphocytes in the temperature range (25÷41)°C. A discontinuity in the plot probe order parametervs. temperature, at a temperature of about 31°C, is observed. This discontinuity is upward shifted to a temperature of 35°C in the presence of staphylococcal enterotoxinB and is no longer observed when using isolated plasma membrane. These results are interpreted as being due to a change in the structural properties of the lipid phase of plasma membrane during the activation of the lymphocyte cells.     

Fibre stability in anisotropic matrix at small strains

As acknowledged in almost all monographs on the fracture of composite materials, one of the major fracture mechanism in unidirectional fibrous composites under uniaxial compression along the reinforcing elements is the stability loss of the material structure (the structural instability). According to this mechanism, theoretical investigations of the fracture along the fibres are reduced to those of the stability loss in the material structure, and the value of external critical forces is accepted as the value of failure forces. At present, numerous theoretical investigations have been carried out in this field with the use of the three-dimensional linearized theory of stability in the framework of the piecewise-homogeneous body model. However, in all the investigations it is assumed that the matrix and the fibre material are isotropic. It is evident that in many cases it is necessary to take into account the anisotropy of the matrix material when investigating the stability loss of fibres. In view of the above, in the framework of the piecewise-homogeneous body model using the three-dimensional linearized theory of stability, the present paper considers the stability loss of the fibre in the anisotropic (transversally isotropic) matrix. The effect of the properties of the matrix material on the critical values of the external loading is examined.Submitted to the 10th International Conference of Mechanics of Composite Materials (Riga, April 20–23, 1998).Published in Mekhanika Kompozitnykh Materialov, Vol. 33, No. 5, pp. 603–611. September–October, 1997.     

Biomagnetic measurements utilising a superparamagnetic marker: a feasibility study

Summary A preliminary study is here reported on a new potential marker for biomagnetic measurements. The marker consists of superparamagnetic polymer microspheres which were detected in the presence of external steady magnetic fields by means of an r.f.-SQUID magnetometer. The particles were prepared in samples differing in the concentration value and immersed in a homogeneous magnetic field of variable intensity. A simple model was taken into account for the distribution of the microspheres in the samples, so that the theoretical values were compared to the marker field values measured by the biomagnetic sensor. The overall sensitivity of the experimental apparatus and the minimum concentration value of the marker were then estimated.     

Growth properties for solutions of differential equations defined in the disk

Summary We investigate the growth of solutions of a class of differential equations which are defined in the unit disk and for which the coefficients have slow growth in the unit disk as measured by the Nevanlinna characteristic. These results extend earlier work of S. Bank.     

Strength of cylinder joint adhesively bonded by coupling

Summary A method of joining two metal cylindrical shafts with adhesive coupling is proposed. Two cylindrical shafts with the same diameter are connected by bonding through a cylindrical coupling with epoxy resin. The strength of the shaft joint under tensile loading and torsional loading is investigated analytically and experimentally. The stress and strain distributions of the shaft joint is analyzed by the finite element method. The analyzed strain distributions in the joint are compared with experimental values. The joint strength is predicted by applying the strength laws of shafts, coupling, adhesive layer and adhesive interface between shaft and adhesive coupling. The effects of the coupling dimension on the joint strength are examined. It is shown that the adhesive shaft joint can transfer the load by which the cylindrical shafts are plastically deformed.This paper was refined by the author, K. Ikegami, during statying at Technische Universität München under the support of Deutscher Akademischer Austauschdients. The author is grateful to Professor Lippmann of Technische Universität München who is the host professor of the support.     

Study of the reciprocal space image of the biaxial nematic phase in the plane of the amphiphilic bilayer

High resolution synchrotron X-ray measurements have been performed on the uniaxial and biaxial phases of the lyotropic mixture potassuim laurate, decanol and water. An elegant magnetic orientational procedure allows us to obtain the cut of the reciprocal space image of the biaxial phase at the plane perpendicular to the amphiphilic bilayer. The analysis of densitometric profiles of the diffracted bands indicate an anisotropic micellar correlation in the plane of the amphiphilic bilayer. It is suggested that an anisotropic distribution of decanol and potassium laurate in this plane could be responsible for this effect.     

Inertia-preserving secant updates

Corrections to the last two equations of Ref. 1 are given.     

Glass transitions in hydrogen-bonded polymer complexes

Mutual precipitates of poly (N, N-dimethyl acrylamide) and poly (4-hydroxystyrene) were collected from dioxane, methanol, or acetone. The glass transition (T_g) temperatures of the precipitates are higher than the weight-average values. Clear films cast from dimethylformamide solutions have lower T_g values. Complexation also occurred between poly (ethyl oxazoline) and poly (4-hydroxystyrene) in dioxane and between poly (vinyl pyrrolidone) and poly (4-hydroxystyrene) in methanol. Again, the glass transition temperatures of the precipitates are higher than the values for the blend films. The ΔC_p values associated with the glass transitions of the complexes are smaller than those of the blends having the same compositions. Negative excess heat capacities of mixing have been observed for several precipitates.