批量离子交换层析和凝胶过滤层析在类人胶原蛋白I纯化中的应用

研究了利用批量离子交换层析与凝胶过滤层析相结合的方法纯化类人胶原蛋白I的最佳条件。分别考察了不同离子交换树脂、缓冲溶液pH、离子强度、进料蛋白浓度对批量离子交换的影响,以及不同凝胶过滤介质对凝胶过滤层析的影响。结果表明,采用阴离子交换树脂DEAE52吸附杂蛋白,缓冲液pH为7.0,NaCl浓度为0.2mol/L,进料蛋白浓度为40mg/mL,并采用凝胶过滤介质SephadexG-100进一步纯化后,类人胶原蛋白I的纯度可达到98.2%,总纯化倍数为3.1,总回收率为80.6%。SDS-PAGE分子量分析和N末端氨基酸序列分析均表明纯化后的类人胶原蛋白I与基因设计一致。     

锂离子电池负极合金CoSn和Cu-Sn的制备与表征

CoSn alloy and Cu-Sn samples were synthesized by H₂-reduction following solid-state reaction between Co(Ⅱ)， Cu(Ⅱ)， Sn(Ⅳ) and NaOH at ambient temperature. The samples were characterized by XRD， SEM. The results showed that CoSn alloy (80～200nm) is globe-shaped， ultrafine hexagonal material， and Cu-Sn alloy powder consists of two phases， i.e. Cu₆Sn₅ and Cu₃Sn. Cu-Sn powder has spherical morphology and the particle size is estimated to be 60～70nm. The electrochemical performances of CoSn alloy and Cu-Sn powder were studied using lithium-ions model cell Li/LiPF₆ (EC+DMC)/CoSn (or Cu-Sn). It was demonstrated the reversible discharge capacities for 10 cycles keep above 280mAh·g^-1 for nanophase Cu-Sn， and 60mAh·g^-1 for CoSn alloy. Differ-ential capacity plots showed that the reaction mechanisms of Cu-Sn with lithium were reversible.     

超球谐展开的收敛行为He原子的^3S态

利用相关函数－超球谐－广义Ｌａｇｕｅｒｒｅ函数方法，研究Ｈｅ原子＾３Ｓ态波函数向超球谐函数展开的收敛行为。截止于ｌ＝０，１，２的超球谐函数给出的本征能分别与组态相互作用的ｓ－，ｓｐ－，ｓｐｄ－极限能一致。仅用４４个超球谐函数，便得到了与精确的ＨｙｌｌｅｒａａｓＣＩ变分能量小数点后第５位的２＾３Ｓ，３＾３Ｓ的４＾３Ｓ态本征能吻合。     

Development of 1-(2-pyridylazo)-2-naphthol-modified polymeric membranes for the effective batch pre-concentration and determination of zinc traces with flame atomic absorption spectrometry

The development of 1-(2-pyridylazo)-2-naphthol (PAN)-modified polymeric membranes for the effective batch pre-concentration and determination of zinc traces with flame atomic absorption spectrometry (FAAS) is described. The method is based on the chemical bonding of the metal species with a suitable ligand, which has been immobilized into a water-insoluble cellulose acetate (CA) membrane followed by simple rinsing of the chelating agent-metal complex with an acidified methanolic solution. The latter is directly aspirated to the nebulizer of a FAA spectrophotometer without any other treatment. As an analytical demonstration, trace concentrations of Zn(II) were successfully detected in real samples, such as seawater, river and lake water, wastewater as well as in a reference material, without any laborious and time-consuming treatment. Several working parameters were investigated. A pre-concentration factor of 100 was achieved by simple immersing of a circular piece of the CA-PAN membrane (0.6 cm diameter) in the tested samples for 30 min at room temperature. The analytical curve was rectilinear up to 30 mug l(-1) zinc with detection limit of 0.7 mug l(-1), a quantitation limit of 2.0 mug l(-1) and a relative standard deviation lower than 2%.     

高密度燃料HDF-1与橡胶的相容性研究

报道了在室温和70 ℃下橡胶材料G402氟硅胶、丁腈胶5171、丁腈胶4170、贮囊橡胶用合成的高密度燃料HDF-1浸泡后性能如伸长率、邵尔硬度、重量、面积体积的变化，并与采用3号喷气燃料（RP-3）实验结果进行对照。用红外光谱测定了燃料浸泡前后橡胶组成的变化。实验结果表明，G402氟硅胶和贮囊对于HDF-1和RP-3有相近的相容性，丁腈胶5171对HDF-1的相容性比对RP-3的相容性稍差，丁腈胶4170对HDF-1的相容性比对RP-3的相容性更差的结果。因此，丁腈胶5171和丁腈胶4170不能用于HDF-1储存和输送，原使用RP-3系统的橡胶密封件不能直接使用HDF-1。     

(1R,2S)或(1S,2R)-1,2-二苯基-2-氨基乙醇衍生物手性配体的合成及其用于不对称催化反应

重点报道了以（１Ｒ，２Ｓ）或（１Ｓ，２Ｒ）－１，２－二苯基－２－氨基乙醇衍生物手性配体的合成及其用于不对称催化反应的研究，如去氢氨基酸的氢化、醛的乙基锌加成、酮的还原、活泼亚甲基化合物的烷基化、醛的硅腈化和瑞福马斯基反应等．研究了手性配体的结构、底物和反应条件等对上述反应的对映选择性和催化活性的影响．     

A Facile Three-Component One-Pot Synthesis of Structurally Constrained Tetrahydrofurans, Which Are t-RNA Synthetase Inhibitor Analogues

A one-pot procedure for the efficient synthesis of a small library of t-RNA inhibitor analogues was developed. Thus,Rh2(OAc)4 catalyzed three-component 1,3-dipolar cycloaddition reactions of carbonyl ylides derived from diazoindan-1,3-dione and aldehydes with other dipolarophiles in 1,1,2,2-tetrachloroethane at 80 ℃ gave ring fused tetrahydrofurans having three stereocenters in good yield.     

Narrow band quantitative and multivariate electroencephalogram analysis of peri-adolescent period

ABSTRACT: BACKGROUND: The peri-adolescent period is a crucial developmental moment of transition from childhood to emergent adulthood. The present report analyses the differences in Power Spectrum (PS) of the Electroencephalogram (EEG) between late childhood (24 children between 8 and 13 years old) and young adulthood (24 young adults between 18 and 23 years old). RESULTS: The narrow band analysis of the Electroencephalogram was computed in the frequency range of 0--20 Hz. The analysis of mean and variance suggested that six frequency ranges presented a different rate of maturation at these ages, namely: low delta, delta-theta, low alpha, high alpha, low beta and high beta. For most of these bands the maturation seems to occur later in anterior sites than posterior sites. Correlational analysis showed a lower pattern of correlation between different frequencies in children than in young adults, suggesting a certain asynchrony in the maturation of different rhythms. The topographical analysis revealed similar topographies of the different rhythms in children and young adults. Principal Component Analysis (PCA) demonstrated the same internal structure for the Electroencephalogram of both age groups. Principal Component Analysis allowed to separate four subcomponents in the alpha range. All these subcomponents peaked at a lower frequency in children than in young adults. CONCLUSIONS: The present approaches complement and solve some of the incertitudes when the classical brain broad rhythm analysis is applied. Children have a higher absolute power than young adults for frequency ranges between 0-20 Hz, the correlation of Power Spectrum (PS) with age and the variance age comparison showed that there are six ranges of frequencies that can distinguish the level of EEG maturation in children and adults. The establishment of maturational order of different frequencies and its possible maturational interdependence would require a complete series including all the different ages.     

Er3+单掺、Er3+/Yb3+共掺杂Ca12Al14O32F2的 制备及上转换发光性质

利用高温固相法成功制备了Er~(3+)单掺、Er~(3+)/Yb~(3+)共掺杂Ca_(12)Al_(14)O_(32)F_2上转换发光样品。在980 nm激光激发下,Er~(3+)单掺和Er~(3+)/Yb~(3+)共掺杂样品均呈现出较强的绿光(528,549 nm)和较弱的红光(655 nm)发射,分别归因于Er~(3+)离子的~2H_(11/2),~4S_(3/2)→~4I_(15/2)和~4F_(9/2)→~4I_(15/2)能级跃迁。随着Er离子浓度的增加,单掺杂样品上转换发光强度先增大后减小,最佳掺杂浓度为0.8%。共掺杂Yb~(3+)后,Er~(3+)的发光强度明显增大。还原气氛下合成的样品上转换发光强度增大约两倍,可能和笼中阴离子基团变化有关。发光强度和激发光功率的关系表明所得上转换发射为双光子吸收过程,借助Er~(3+)-Yb~(3+)体系能级结构详细讨论了上转换发射的跃迁机制。     

KIT-6负载CeO2催化CO2和甲醇合成碳酸二甲酯

采用不同老化温度(80、100、120和150℃)合成了一系列KIT-6载体,并通过浸渍法制备了相应的CeO_2/KIT-6催化剂。结合X射线衍射、N_2物理吸附、NH_3程序升温脱附、CO_2程序升温脱附、透射电子显微镜、傅里叶变换红外光谱和X射线光电子能谱等表征结果,详细考察了老化温度对KIT-6结构以及CeO_2/KIT-6催化剂直接催化CO_2和甲醇合成碳酸二甲酯(DMC)反应活性的影响。结果表明,不同老化温度下制备的KIT-6均保持其独特的三维孔道结构。随着老化温度升高,KIT-6比表面积先增大后减小,当老化温度为100℃时,KIT-6比表面积达到最大(683 m~2·g~(-1))。KIT-6较高的比表面积有利于提高CeO_2分散度,进而提高暴露的活性位点数量,催化活性随催化剂表面中等碱/酸性吸附位数量和Ce~(3+)含量的增加而逐渐提高。其中,CeO_2/100-KIT-6催化剂中CeO_2颗粒尺寸最小(5.9 nm),暴露的活性位数量最高,催化活性最佳。随后,考察了反应温度和压力对CeO_2/100-KIT-6催化活性的影响。随着反应温度提高,催化活性先升高后降低,当反应温度为140℃时,催化活性最高;且催化活性随反应压力的提高而逐渐增加。在反应温度为140℃、压力为6.8 MPa条件下,催化剂经6次循环后,DMC收率由15 mmol·g_(CeO_2)~(-1)逐渐降低至2.8 mmol·g_(CeO_2)~(-1),原因归结为反应过程中CeO_2纳米颗粒发生团聚,使暴露出的活性位数量减少。