Simultaneous bioanalysis and pharmacokinetic interaction study of acebrophylline,levocetirizine and pranlukast in Sprague–Dawley rats

The combination of acebrophylline (ABP), levocetirizine (LCZ) and pranlukast (PRN) is used to treat allergic rhinitis, asthma, hay‐fever and other conditions where patients experience difficulty in breathing. This study was carried out with the aim of developing and validating a reverse‐phase high‐performance liquid chromatographic bioanalytical method to simultaneously quantitate ABP, LCZ and PRN in rat plasma. The objective also includes determination of the pharmacokinetic interaction of these three drugs after administration via the oral route after individual and combination treatment in rat. Optimum resolution between the analytes was observed with a C₁₈ Kinetex column (250 mm × 4.6 mm × 5 μm). The chromatography was performed in a gradient elution mode with a 1 mL/min flow rate. The calibration curves were linear over the concentration range of 100–1600 ng/mL. The intra‐ and inter‐day precision and accuracy were found to be within acceptable limits as specified in US Food and Drug Administration guideline for bioanalytical method validation. The analytes were stable on the bench‐top (8 h), after three freeze–thaw cycles, in the autosampler (8 h) and as a dry extract (?80°C for 48 h). The statistical results of the pharmacokinetic study in Sprague–Dawley rats showed a significant change in pharmacokinetic parameters for PRN upon co‐administration of the three drugs.     

Clickable polyurethanes based on s‐triazine ring containing aromatic diisocyanate bearing pendent alkyne group: Synthesis and postmodification

A new s‐triazine ring containing aromatic diisocyanate bearing a pendent alkyne group, namely, 2,4‐bis(4‐isocyanatophenoxy)?6‐(prop‐2‐yn‐1‐yloxy)?1,3,5‐triazine was synthesized and reacted with various diols viz., 1,10‐decanediol, tetraethylene glycol and polyethylene glycols in the presence of dibutyltin dilaurate as the catalyst to obtain a series of linear polyurethanes. The selected polyurethanes possessing pendent alkyne groups were postmodified with chemically diverse azides viz., 1‐(azidomethyl)benzene, 1‐(azidomethyl)pyrene, and methoxy end‐caped poly(ethylene glycol) azide via copper‐catalysed azide‐alkyne Huisgen 1,3‐dipolar cycloaddition. FTIR and ¹H NMR spectra indicated quantitative click reaction. UV–vis and fluorescence spectroscopic analysis confirmed complete incorporation of pyrenyl groups indicating the formation of fluorescence active polyurethane by postmodification with 1‐(azidomethyl)pyrene. TG analysis of polyurethanes indicated two stage weight loss and their thermal stability, as judged by T ₁₀ values, was governed by weight percent of urethane linkages. The water contact angle measurements revealed improved wettability with increased content of PEG either in the backbone of polyurethanes or as grafted chains. DLS and TEM studies confirmed that certain polyurethanes possessing PEG segments displayed self‐assembly in aqueous solution, which was further supported by pyrene encapsulation studies using UV–vis spectroscopy. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 1008–1020     

Facile Chan‐Lam coupling using ferrocene tethered N‐heterocyclic carbene‐copper complex anchored on graphene

Ferrocene tethered N‐heterocyclic carbene‐copper complex anchored on graphene ([GrFemImi]NHC@Cu complex) has been synthesized by covalent grafting of ferrocenyl ionic liquid in the matrix of graphene followed by metallation with copper (I) iodide. The [GrFemImi]NHC@Cu complex has been characterized by fourier transform infrared (FT‐IR), fourier transform Raman (FT‐Raman), CP‐MAS ¹³C NMR spectroscopy, transmission electron microscopy (TEM), thermogravimetric analysis (TGA), energy dispersive X‐ray (EDX) analysis, X‐ray photoelectron spectroscopy (XPS), Brunauer–Emmett–Teller (BET) surface area analysis and X‐ray diffractometer (XRD) analysis. This novel complex served as a robust heterogeneous catalyst for the synthesis of bioactive N‐aryl sulfonamides from variety of aryl boronic acids and sulfonyl azides in ethanol by Chan‐Lam coupling. Recyclability experiments were executed successfully for six consecutive runs.     

Ecofriendly synthesis and biological evaluation of 4-(4-nitro-phenyl)-2-phenyl-1,4-dihydro-benzo[4,5]imidazo[1,2-a]pyrimidine-3-carboxylic acid ethyl ester derivatives as an antitubercular agents

An ecofriendly route has been investigated for the synthesis of 4-(4-nitro-phenyl)-2-phenyl-1,4-dihydro-benzo[4,5]imidazo[1,2-a]pyrimidine-3-carboxylic acid ethyl ester derivatives by one-pot, three-component condensation of ethyl benzoylacetate, aromatic aldehydes, and 2-amino benzimidazole using 260?mol% of citric acid as reaction mediator. Citric acid is an inexpensive, nontoxic, and green medium with smoothly activates the rate of reaction. The synthesized compounds were assessed for in vitro antimycobacterial activity against Mycobacterium tuberculosis H₃₇RV strain using the microplate alamar blue assay (MABA). The results indicate that among all the synthesized compound series, P-4 and P-9 compounds illustrate effective activity with a minimum inhibitory concentration of 25?µg/ml.     

Determination of terbinafine in human plasma using UPLC–MS/MS: Application to a bioequivalence study in healthy subjects

A high‐throughput and sensitive ultra‐performance liquid chromatography–tandem mass spectrometry (UPLC–MS/MS) method has been developed for the determination of terbinafine in human plasma. The method employed liquid–liquid extraction of terbinafine and terbinafine‐d7 (used as internal standard) from 100 μL human plasma with ethyl acetate–n‐hexane (80:20, v/v) solvent mixture. Chromatography was performed on a BEH C₁₈ (50 × 2.1 mm, 1.7 μm) column using acetonitrile–8.0 mm ammonium formate, pH 3.5 (85:15, v/v) under isocratic elution. For quantitative analysis, MS/MS ion transitions were monitored at m/z 292.2/141.1 and m/z 299.1/148.2 for terbinafine and terbinafine‐d7, respectively, using electrospray ionization in the positive mode. The method was validated according to regulatory guidance for selectivity, sensitivity, linearity, recovery, matrix effect, stability, dilution reliability and ruggedness with acceptable accuracy and precision. The method shows good linearity over the tested concentration range from 1.00 to 2000 ng/mL (r² ≥ 0.9984). The intra‐batch and inter‐batch precision (CV) was 1.8–3.2 and 2.1–4.5%, respectively. The method was successfully applied to a bioequivalence study with 250 mg terbinafine in 32 healthy subjects. The major advantage of this method includes higher sensitivity, small plasma volume for processing and a short analysis time.     

Exceptionally Plastic/Elastic Organic Crystals of a Naphthalidenimine-Boron Complex Show Flexible Optical Waveguide Properties

The design of molecular compounds that exhibit flexibility is an emerging area of research. Although a fair amount of success has been achieved in the design of plastic or elastic crystals, realizing multidimensional plastic and elastic bending remains challenging. We report herein a naphthalidenimine–boron complex that showed size-dependent dual mechanical bending behavior whereas its parent Schiff base was brittle. Detailed crystallographic and spectroscopic analysis revealed the importance of boron in imparting the interesting mechanical properties. Furthermore, the luminescence of the molecule was turned-on subsequent to boron complexation, thereby allowing it to be explored for multimode optical waveguide applications. Our in-depth study of the size-dependent plastic and elastic bending of the crystals thus provides important insights in molecular engineering and could act as a platform for the development of future smart flexible materials for optoelectronic applications.     

Rhodium(III) catalyzed synthesis of isoquinolone fused azabicycles through C–H activation of N-pivaloyloxy benzamides

Herein we describe an efficient one pot strategy toward highly functionalized isoquinolone fused azabicycles having great synthetic potential via C–H activation of N-pivaloyloxy benzamides under very mild conditions. The reaction is accomplished at room temperature within one hour in good to excellent yields and is found to be compatible with a range of diazabicyclic olefins and benzamides. The present strategy offers an easy route for the synthesis of biologically relevant compounds which possess multiple points for divergent synthesis. N–N bond cleavage of synthesized compounds may enable their significant role as effective precursors for the preparation of diaminocyclopentane fused isoquinolones.     

High‐efficiency polymer solar cells based on phenylenevinylene copolymer with BF2‐azopyrrole complex and CN‐PC70BM with solvent additive

Power conversion efficiency (PCE) of phenylenevinylene‐based copolymer with BF₂ azopyrrole complex (PB)/modified PC₇₀BM, that is, CN‐PC₇₀BM bulk heterojunction solar cells improves from 2.16 to 4.90% using a processing additive and drying condition. The results demonstrate that a processing additive and drying condition provides an effective means to control both the surface roughness and finer interpenetrating networks to enhance the exciton dissociation into free charge carriers, charge transportation, and collection. Taking into the account of simple device fabrication process without thermal annealing, the PCE of the polymer solar cell can further improved by chloronapthalene (CN) additive under the fast drying condition. The average carrier lifetimes extracted from the impedance spectra and found to correlate with measured PCEs. At short circuit conditions and illumination, the average charge carrier lifetime was found vary from 16.8 to 32 μs with power conversion efficiencies ranging from 3.0 to 4.9%. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Synthesis,structural characterization and biological studies of neodymium(III) and samarium(III) complexes with mercaptotriazole Schiff bases

A series of neodymium(III) and samarium(III) complexes of type [Ln(L)Cl(H₂O)₃] have been synthesized with Schiff bases (LH₂) derived from 3‐(phenyl/substituted phenyl)‐4‐amino‐5‐mercapto‐1,2,4‐triazoles and isatin. The structures of the complexes were established using elemental analysis, molar conductivities, magnetic moments, infrared, NMR (¹H, ¹³C) and UV–visible spectra, X‐ray diffraction and mass spectrometry. The thermal behaviour of these compounds under non‐isothermal conditions was investigated using thermogravimetry and differential thermogravimetry. The intermediates obtained at the end of various thermal decomposition steps were identified from elemental analysis and infrared spectral studies. All the ligands and their complexes were also screened for their antibacterial activity against Staphylococcus aureus and Bacillus subtilis and antifungal activity against Aspergillus niger, Aspergillus flavus and Colletotrichum capsici. The screening results were correlated with the structural features of the compounds. Copyright © 2015 John Wiley & Sons, Ltd.