X-ray and UV photoelectron spectroscopy of Ag nanoclusters

The main purpose of the present work is to analyze a series of Ag nanoparticles (NPs) with different size or ligand functionalization by using X-ray photoelectron spectroscopy (XPS) and to identify the differences in the band-shape and energy peak position of photoemission spectra due to the particle dimension. A transmission electron microscopy characterization was performed, to verify the consistency of the results. Three types of samples were prepared starting from AgNO₃ water solution and adding different capping agents. In the first two cases, the formation of NPs was promoted by the reduction of silver ions Ag⁺¹ to metallic Ag⁰ through the addition of sodium borohydride, whereas in the last case, it was triggered by the exposure to UV light. Depending on the size of the NPs, a different physical behavior can be recognized. NPs with diameter of about 5 nm are characterized by the phenomenon of localized surface plasmon resonance (LSPR). The other type of samples having a diameter of about 1.5 nm presents discrete energy levels instead of electronic bands, and in this case, a typical fluorescence phenomenon can be observed. In the latter case, we can refer to such systems as nanoclusters. The XPS analyses were focused on the Ag 3D spectra looking for the possible shifts of the Ag doublet as a function of the particles size. The ultraviolet photoelectron spectroscopy with He II source was used for the investigation of possible changes in the valence band.     

Surface and structural analysis of epitaxial La1−xSrx (Mn1−yCoy)zO3 films

In the present study were studied the ferromagnetic La_1−xSr_x (Mn_1−yCo_y)_zO₃ (LSMCO) films with Co content y = 0 to 0.18, grown on LaAlO₃ substrates by advantageous pulsed-injection metalorganic chemical vapor deposition technique. The LSMCO films exhibit negative colossal magnetoresistance effect; therefore, they are interesting as potential material for the applications in magnetic field sensing. The changes of lattice volume in the investigated LSMCO films were monitored by X-ray diffraction measurements revealing a transition from tensile to compressive strain with increase of Co content. Additionally, from the atomic force microscopy images, the surface smoothening with increase of y was determined. Despite the reduction of the out-of-plane lattice parameter of LSMCO, the increase of lattice volume in the whole Co-doping range was observed. The X-ray photoelectron spectroscopy combined with Ar⁺ ion sputtering was used for the investigation of chemical composition of the LSMCO films and demonstrated the change and redistribution of oxidation states of Mn and Co on the surface and in the volume of the films. Regardless of the structural changes and charge distribution of Co and Mn cations, epitaxial LSMCO exhibits ferromagnetic properties and magnetoresistance values increases with augmenting Co content in the range of y = 0 to 0.18.     

Bifunctional Ligand Enables Efficient Gold‐Catalyzed Hydroalkenylation of Propargylic Alcohol

Using the previously designed biphenyl‐2‐ylphosphine ligand, featuring a remote tertiary amino group, the first gold‐catalyzed intermolecular hydroalkenylation of alkynes has been developed. Synthetically valuable conjugated dienyl alcohols are formed in moderate to good yields. A range of alkenyltrifluoroborates are allowed as the alkenyl donor, and no erosion of alkene geometry and/or the propargylic configuration are detected. DFT calculations confirm the critical role of the remote basic group in the ligand as a general‐base catalyst for promoting this novel gold catalysis with good efficiency.     

Morphology and performance of CoOOH films synthesized via electrochemical oxidation: substrate effects

In the present work, CoOOH films are synthesized from the electrochemical oxidation of α-Co(OH)₂ as precursor. The substrate influences on the material electrochemical properties are studied. The samples are structural and morphologically characterized using techniques of X-ray diffraction (XRD) and scanning electronic microscopy (SEM). The cyclic voltammetry, galvanostatic charge-discharge, and electrochemical impedance spectroscopy techniques are used for the electrochemical characterization. The films deposited on steel substrate grew in the vertical hexagonal platelet form. Meanwhile, films on Ti plate presented morphology in agglomerated sphere form. After electrochemical oxidation, the film initial morphology is maintained. The films deposited on steel plate have a structure which favors charge storage showing a high specific capacity value (110.92 mA h g^?1) and cyclic stability of 92% after 1000 cycles. Finally, the relaxation time constant value calculated was 5.6 s. This fact is making this material as a possible good candidate for application as electrode material or additive for other materials, in energy storage devices.     

Charged molecular films on brownian particles: structure, interactions, and relation to stability

The interfacial film of physically adsorbed ionic amphiphilic molecules on submicron particles dispersed in water was studied by a combination of surface tension measurements, laser light scattering (LLS) and high-shear experiments in a microchannel. General features in the structure and morphology of the molecular film are identified and understood in the framework of the two-step Langmuir adsorption model deduced from the adsorption isotherm. On the basis of this approach, the phase transitions and structural ordering of the film at the solid-liquid interface are analyzed in detail. A novel methodology based on high-shear aggregation experiments subsequently analyzed by means of LLS is proposed and turns out to be able to provide significant information on the phase transitions and structural arrangements of the adsorbed molecules (in substantial agreement with the adsorption isotherm model) as well as on the resulting interactions. Particularly important for applications is the result that, with no added salt, the films on two particles can adhere/fuse, leading to aggregation as long as an uncovered (hydrophobic) patch is present (unsaturated molecular layers). In the opposite case of fully developed layers, by analyzing the mechanism of shear aggregation of charged particles in the low-salt limit, we show that, when the hydrophobic attraction is absent, short-range hydration repulsive forces dominate over Derjaguin-Landau-Verwey-Overbeek (DLVO) forces and adhesion can never be achieved even upon application of very high collision energies. Consistently, a lower limiting boundary for the hydration interaction is calculated and found to be in agreement with data in the literature.     

Amount of Melanin Granules in Human Hair Defines the Absorption and Conversion to Heat of Light Energy in the Visible Spectrum

One of the known important functions of hair is protection from extensive sunlight. This protection is accomplished in large part due to natural hair pigmentation which is known to reflect the number of melanin granules (melanosomes) in the hair shaft, and melanin variants. Melanin takes in excessive light energy and converts it to heat in a process called absorption; heat is then dissipated into the environment as infrared radiation, thereby protecting the underlying skin. We used transmission electron microscopy (TEM) to visualize the melanosome counts in samples of human hair, and used thermal microscopy to measure the temperature changes of the samples when exposed to green and blue light lasers. In our experiments green light conversion to heat was highly correlated to the number of melanosomes, whereas blue light conversion to heat was less correlated, which may be because the reddish melanosomes it contains are less effective in absorbing energy from the blue spectrum of light. Anyway, we have shown the metals accumulation in the melanin can be easily visualized with TEM. We confirmed that the amount of melanin granules in human hair defines the conversion to heat of light energy in the visible spectrum.     

Co-detection of Copper and Lead in Artisanal Sugarcane Spirit Using Caffeic Acid-modified Graphite Electrodes

Caffeic acid (CA)-modified graphite electrodes [GE/poly(CA)] was applied to the co-detection of copper and lead in artisanal sugarcane spirit using square-wave anodic stripping voltammetry (SWASV). Electrochemical and morphological studies were performed, and a mechanism for polymerization was proposed. Electropolymerization, SWASV, and analysis conditions parameters were optimized. Interferents, repeatability, reproducibility, and addition and recovery tests were carried out. GE/poly(CA) shows a linear range from 15 to 705 μg/L with a limit of detection of 3.01 μg/L for Pb(II) and 4.50 μg/L for Cu(II). Real samples of artisanal sugarcane spirit were used, and the electrochemical results were compared with atomic absorption spectroscopy experiments.     

Redox state of coenzyme Q10 determines its membrane localization

The interaction between oxidized (ubiquinone-10) and reduced (ubiquinol-10) coenzyme Q 10 with dimyristoylphosphatidylcholine has been examined by differential scanning microcalorimetry, X-ray diffraction, infrared spectroscopy, and (2)H NMR. Microcalorimetry experiments showed that ubiquinol-10 perturbed considerably more the phase transition of the phospholipids than ubiquinone-10, both forms giving rise to a shoulder of the main transition peak at lower temperatures. Small angle X-ray diffraction showed an increase in d-spacing suggesting a thicker membrane in the presence of both ubiquinone-10 and ubiquinol-10, below the phase transition and a remarkable broadening of the peaks indicating a loss of the repetitive pattern of the lipid multilamellar vesicles. Infrared spectroscopy showed an increase in wavenumbers of the maximum of the CH 2 stretching vibration at temperatures below the phase transition, in the presence of ubiquinol-10, indicating an increase in the proportion of gauche isomers in the gel phase, whereas this effect was smaller for ubiquinone-10. A very small effect was observed at temperatures above the phase transition. (2)H NMR spectroscopy of perdeuterated DMPC showed only modest changes in the spectra of the phospholipids occasioned by the presence of coenzyme Q 10. These small changes were reflected, in the presence of ubiquinol-10, by a decrease in resolution indicating that the interaction between coenzyme Q and phospholipids changed the motion of the lipids. The change was also visible in the first spectral moment (M1), which is related with membrane order, which was slightly decreased at temperatures below the phase transition especially with ubiquinol-10. A slight decrease in M 1 values was also observed above the phase transition but only for ubiquinol-10. These results can be interpreted to indicate that most ubiquinone-10 molecules are localized in the center of the bilayer, but a considerable proportion of ubiquinol-10 molecules may span the bilayer interacting more extensively with the phospholipid acyl chains.     

On the regularity of the pressure field of Brenier’s weak solutions to incompressible Euler equations

In this paper we improve the regularity in time of the gradient of the pressure field arising in Brenier’s variational weak solutions (Comm Pure Appl Math 52:411–452, 1999) to incompressible Euler equations. This improvement is necessary to obtain that the pressure field is not only a measure, but a function in . In turn, this is a fundamental ingredient in the analysis made by Ambrosio and Figalli (2007, preprint) of the necessary and sufficient optimality conditions for the variational problem by Brenier (J Am Mat Soc 2:225–255, 1989; Comm Pure Appl Math 52:411–452, 1999).     

Fabrication, structural characterization, and applications of langmuir and langmuir-blodgett films of a poly(azo)urethane

The synthesis of a poly(azo)urethane by fixing CO(2) in bis-epoxide followed by a polymerization reaction with an azodiamine is presented. Since isocyanate is not used in the process, it is termed "clean method" and the polymers obtained are named "NIPUs" (non-isocyanate polyurethanes). Langmuir films were formed at the air-water interface and were characterized by surface pressure vs mean molecular area per mer unit (Pi-A) isotherms. The Langmuir monolayers were further studied by running stability tests and cycles of compression/expansion (possible hysteresis) and by varying the compression speed of the monolayer formation, the subphase temperature, and the solvents used to prepare the spreading polymer solutions. The Langmuir-Blodgett (LB) technique was used to fabricate ultrathin films of a particular polymer (PAzoU). It is possible to grow homogeneous LB films of up to 15 layers as monitored using UV-vis absorption spectroscopy. Higher number of layers can be deposited when PAzoU is mixed with stearic acid, producing mixed LB films. Fourier transform infrared (FTIR) absorption spectroscopy and Raman scattering showed that the materials do not interact chemically in the mixed LB films. The atomic force microscopy (AFM) and micro-Raman technique (optical microscopy coupled to Raman spectrograph) revealed that mixed LB films present a phase separation distinguishable at micrometer or nanometer scale. Finally, mixed and neat LB films were successfully characterized using impedance spectroscopy at different temperatures, a property that may lead to future application as temperature sensors. Principal component analysis (PCA) was used to correlate the data.