The role of duct thickness on the quenching process of premixed flame propagation

The propagation of premixed laminar flame in ducts of circular cross-section considering a thermal-diffusive model is investigated numerically. Heat losses by conduction to the channels walls are taken into account using the thermally thin wall regime. The effects and the relationship between thickness and diameter of the tube with the flame speed propagation are studied and the quenching condition is obtained as a function of the heat-loss parameter. The mathematical model employs the axisymmetric energy and species equations. The calculations are based on a two-step chemistry, with an Arrhenius, energetically neutral, radical production reaction followed by an exothermic radical recombination reaction. For large values of the heat-loss parameter, the wall temperature is close to the free stream temperature and all the heat losses through the wall are convected away. No heat feedback occurs. On the other hand, for small values of the heat-loss parameter, a feedback mechanism occurs by transferring heat from the burned gas to the fresh mixture along the tube wall. For values of the heat-loss parameter of order unity, the heat feedback mechanism is able to sustain the flame propagation and the quenching condition disappears, producing an almost planar flame front as the propagation velocity reduces. For this two-step reaction mechanism, the radical species behaviour at the duct walls seems to have negligible effect on the quenching process.     

Evaluation of the Mooney Viscosity of Natural Rubber by Near‐Infrared Spectroscopy

Abstract

The direct near‐infrared spectroscopic reflectance measurements of prevulcanized natural rubber (brown crepe) was employed for determination of its Mooney viscosity. NIR reflectance spectra were obtained for a total of 100 samples whose Mooney viscosity (VM in the range 68–95 units) have been determined by the standard reference procedure using a commercial computerized Mooney viscometer. These samples were employed as the raw material or were treated to achieve better homogenization. A Fourier transform near infrared (FT‐NIR) spectrophotometer was employed, and the reflectance spectra were obtained with resolution of 4 cm^?1 in the range 4000–10,000 cm^?1 as an average of 75 scans. The samples were split in a calibration set containing 70 samples and in an external validation set consisting of the remaining 30 samples. The calibration and validation spectra sets were treated to correct for baseline shift, further transformed by first derivative and finally modeled by partial least squares (PLS) employing four latent variables. The model was evaluated with the external sample test set, and a RMSEP of 3.6 and 3.9 units of Mooney viscosity were obtained for homogenized and nonhomogenized samples, respectively. The NIR method is capable of determining the Mooney viscosity in few minutes in the non‐pretreated sample with an error that is satisfactory for quality control of natural rubber destined for automobile tire manufacturing.     

Stereospecific Synthesis and Photophysical Properties of Propeller-Shaped C90H48 PAH

Herein, we have synthesized an enantiomerically pure propeller-shaped PAH, C₉₀H₄₈, possessing three [7]helicene and three [5]helicene subunits. This compound can be obtained in gram quantities in a straightforward manner. The photophysical and chiroptical properties were investigated using UV/Vis absorption and emission, optical rotation and circular dichroism spectroscopy, supported by DFT calculations. The nonlinear optical properties were investigated by two-photon absorption measurements using linearly and circularly polarized light. The extremely twisted structure and packing of the homochiral compound were investigated by single-crystal X-ray diffraction analysis.     

Sn interaction with the CeO2(1 1 1) system: Bimetallic bonding and ceria reduction

A tin layer 0.8 nm thick was deposited onto the CeO₂(1 1 1) surface by molecular beam deposition at a temperature of 520 K. The interaction of tin with cerium oxide (ceria) was investigated by X-ray photoelectron spectroscopy (XPS), ultra-violet photoelectron spectroscopy (UPS) and resonant photoelectron spectroscopy (RPES). The strong tin-ceria interaction led to the formation of a homogeneous bulk Ce-Sn-O mixed oxide system. The bulk compound formation is accompanied by partial Ce⁴⁺ → Ce³⁺ reduction, observed as a giant 4f resonance enhancement of the Ce³⁺ species. CeO₂ and SnO₂ oxides were formed after oxygen treatment at 520 K. The study proved the existence of strong Ce-Sn interaction and charge transfer from Sn to the Ce-O complex that lead to a weakening of the cerium-oxygen bond, and consequently, to the formation of oxygen deficient active sites on the ceria surface. This behavior can be a key for understanding the higher catalytic activity of the SnO_x/CeO_x mixed oxide catalysts as compared with the individual pure oxides.     

Terahertz absorption spectra of commonly used antimalarial drugs

Optical Review - Terahertz (THz) spectra from the pure forms [i.e. the active pharmaceutical ingredients (APIs)] of four commonly used antimalarial drugs are reported. The well-defined spectral...     

The electronic structure and adsorption geometry of L-histidine on Cu(110)

The adsorption of L-histidine on clean and oxygen-covered Cu(110) surfaces has been studied by soft X-ray photoelectron spectroscopy (XPS) and near-edge X-ray absorption fine structure (NEXAFS) spectroscopy. The valence band spectra, carbon, nitrogen and oxygen 1 s XPS and N K edge absorption spectra were measured for submonolayer, monolayer, and multilayer films. The spectra provide a detailed picture of the electronic structure and adsorption geometry at each coverage. In the monolayer, the histidine molecules are randomly oriented, in contrast to the submonolayer regime, where the molecules are coordinated to the copper surface with the imidazole functional group nearly parallel to, and strongly interacting with, the surface. The pi*/sigma* intensity ratio in NEXAFS spectra at the nitrogen edge varies strongly with angle, showing the imidazole ring is oriented. Adsorption models are proposed.     

Reactive uptake of acetic acid on calcite and nitric acid reacted calcite aerosol in an environmental reaction chamber

The heterogeneous chemistry of gas-phase acetic acid with CaCO(3)(calcite) aerosol was studied under varying conditions of relative humidity (RH) in an environmental reaction chamber. Infrared spectroscopy showed the loss of gas-phase reactant and the appearance of a gaseous product species, CO(2). The acetic acid is observed to adsorb onto the calcite aerosol through both a fast and a slow uptake channel. While the fast channel is relatively independent of RH, the slow channel exhibits enhanced uptake and reaction as the RH is increased. In additional experiments, the calcite aerosol was exposed to both nitric and acetic acids in the presence of water vapor. The rapid conversion of the particulate carbonate to nitrate and subsequent deliquescence significantly enhances the uptake and reaction of acetic acid. These results suggest a possible mechanism for observed correlations between particulate nitrate and organic acids in the atmosphere. Calcium rich mineral dust may be an important sink for simple organic acids.     

Hypervalent hydridosilicates: synthesis, structure and hydride bridging

A range of hydridosilicate anions has been prepared and characterised by spectroscopic, structural and computational methods. The general approach involved reaction of KH with a neutral silane precursor in the presence of [18]crown-6. In this manner, [K([18]crown-6)]+ salts of [Ph3SiH2](-) (1), [Ph3SiF2](-) (9), and [(p-FC6H4)3SiHF](-)/[(p-FC6H4)3SiH2](-) (12) were stabilised and characterized by NMR spectroscopy and X-ray diffraction. In each case, the anion adopts a trigonal bipyramidal (TBP) geometry with three equatorial phenyl groups eclipsing the axial Si-H/Si-F bonds. The Si-H[dot dot dot]K distances, along with DFT calculations on 1, indicate an electrostatic interaction that does not dictate the geometry adopted by the anion. A [H2SiOiPr3](-) salt (7) has also been crystallised in the same way; X-ray diffraction shows in this case a distorted TBP array with axial hydride ligands, and both Si-H[...]K and Si-O[...]K interactions. 1H NMR exchange experiments show 1 to undergo facile hydride exchange with Ph3SiH. Compound 1 acts as a good hydride transfer reagent to a variety of substrates, but its high reactivity often results in redistribution and other side reactions.     

Heterogeneous conversion of calcite aerosol by nitric acid

The reaction of nitric acid with calcite aerosol at varying relative humidities has been studied under suspended particle conditions in an atmospheric reaction chamber using infrared absorption spectroscopy. The reactant concentration in the chamber, as well as the appearance of gas phase products and surface adsorbed species, was spectroscopically monitored before and after mixing with CaCO(3) (calcite) particles. The interaction with HNO(3) was found to lead to gas phase CO(2) evolution and increased water uptake due to heterogeneous conversion of the carbonate to particulate nitrate. The reaction was enhanced as the relative humidity of the system was increased, especially at relative humidities above the reported deliquescence point of particulate Ca(NO(3))(2). The measured reaction extent demonstrates that the total calcite particulate mass is available for reaction with HNO(3) and the conversion process is not limited to the particle surface. The spectroscopy of the surface formed nitrate suggests a highly concentrated solution environment with a significant degree of ion pairing. The implications of the HNO(3) loss and the formation of the particulate nitrate product for atmospheric chemistry are discussed.     

Modified active site coordination in a clinical mutant of sulfite oxidase

The molybdenum site of the Arginine 160 --> Glutamine clinical mutant of the physiologically vital enzyme sulfite oxidase has been investigated by a combination of X-ray absorption spectroscopy and density functional theory calculations. We conclude that the mutant enzyme has a six-coordinate pseudo-octahedral active site with coordination of Glutamine Oepsilon to molybdenum. This contrasts with the wild-type enzyme which is five-coordinate with approximately square-based pyramidal geometry. This difference in the structure of the molybdenum site explains many of the properties of the mutant enzyme which have previously been reported.