Towards a Fundamental Understanding of the Mechanics of Crystal Agglomeration: A Microscopic and Molecular Approach

A novel experimental apparatus has been developed which enables the measurement of adhesion forces between two crystals suspended in a supersaturated solution and allowed to agglomerate over a fixed time period. The geometry of the crystal surfaces at the contact points and the dynamic development of the bond are captured on video and characterised using an image analysis technique. The experimental apparatus has been designed to allow control of supersaturation, orientation of crystal faces, distance between crystals, relative movement of crystals and contact time. The experimental results show that the agglomerate bond strength, expressed as the agglomerate adhesion force per unit contact area, increases with increasing supersaturation and is higher for faster growing faces than for slower growing faces. In addition, a qualitative comparison has been made between the measured force and a theoretical estimation of the interaction force between crystal faces, determined through molecular modelling. It is shown that the speed of approach of two opposing crystal faces is a key parameter in the nature of the subsequent bond, as is their atomic structure.     

Frame-Based Ray Search Algorithms in Unconstrained Optimization

This paper describes a class of frame-based direct search methods for unconstrained optimization without derivatives. A template for convergent direct search methods is developed, some requiring only the relative ordering of function values. At each iteration, the template considers a number of search steps which form a positive basis and conducts a ray search along a step giving adequate decrease. Various ray search strategies are possible, including discrete equivalents of the Goldstein–Armijo and one-sided Wolfe–Powell ray searches. Convergence is shown under mild conditions which allow successive frames to be rotated, translated, and scaled relative to one another.     

Charged particle multiplicity distributions ine + e − annihilation at 29 GeV: a comparison with hadronic data

The charged particle multiplicity distributions for two-jet events ine ⁺ e ^? annihilation at 29 GeV have been measured using the High Resolution Spectrometer at PEP. A Poisson distribution describes the data for both the complete event and for the single jets. In addition, no correlation is observed between the multiplicities in the two jets of an event. For fixed values of the prong number of the complete event, the multiplicity sharing between the two jets is in good agreement with a binomial distribution. The rapidity gap distribution is exponential with a slope equal to the mean rapidity density. These observations, which are consistent with a picture of independent emission of single particles, are contrasted to the results from soft hadronic collisions and conclusions are drawn about the nature of clusters.     

A numerical method to solve the m‐terms of a submerged body with forward speed

To model mathematically the problem of a rigid body moving below the free surface, a control surface surrounding the body is introduced. The linear free surface condition of the steady waves created by the moving body is satisfied. To describe the fluid flow outside this surface a potential integral equation is constructed using the Kelvin wave Green function whereas inside the surface, a source integral equation is developed adopting a simple Green function. Source strengths are determined by matching the two integral equations through continuity conditions applied to velocity potential and its normal derivatives along the control surface. After solving for the induced fluid velocity on the body surface and the control surface, an integral equation is derived involving a mixed distribution of sources and dipoles using a simple Green function and one component of the fluid velocity. The normal derivatives of the fluid velocity on the body surface, namely the m‐terms, are then solved by this matching integral equation method (MIEM). Numerical results are presented for two elliptical sections moving at a prescribed Froude number and submerged depth and a sensitivity analysis undertaken to assess the influence of these parameters. Furthermore, comparisons are performed to analyse the impact of different assumptions adopted in the derivation of the m‐terms. It is found that the present method is easy to use in a panel method with satisfactory numerical precision. Copyright © 2002 John Wiley & Sons, Ltd.     

Limit on monopole flux in the Mont Blanc NUSEX experiment

Summary A trigger dedicated to the search of superheavy monopoles operates since about two years in the NUSEX apparatus, installed in the Mont Blanc tunnel. Monopoles are identified by time of flight and visualization of the pulses involved in a trigger. The present upper limit on monopole flux is 2.3·10⁻¹³ cm⁻² s⁻¹ sr⁻¹ (90% c.l.).

---

Riassunto Da circa due anni è operativo sull'apparato NUSEX, installato nel tunnel del Monte Bianco, un trigger dedicato alla ricerca dei monopoli previsti dalle teorie di grande unificazione. L'identificazione dei monopoli è basata sul tempo di volo e sulla localizzazione nello spazio degli impulsi coinvolti nel trigger. Il limite superiore fino ad oggi raggiunto per il flusso di monopoli è 2.3·10⁻¹³ cm⁻²s⁻¹ sr⁻¹ (90% c.l.).

---

Резюме Триггерная схема, предназначенная для поиска сверхтяжелых монополей, действует в течение почти двух лет в установке NUSEX, расположенной в туннеле под Мон Бланом. Идентификация монополей основана на времени пролета, а локализация в пространстве осуществляется с помощью импульсов в триггерной схеме. Настоящий верхний предел на поток монополей составляет 2.3· ·10⁻¹³ см⁻² с⁻¹ ср⁻¹ (к 90% вероятностью).

     

On the Role of Exponential Smoothing in Circadian Dosimetry

The effects lighting has on health through modulation of circadian rhythms are becoming increasingly well documented. Data are still needed to show how light exposures are influenced by architecture and lighting design and circadian dosimetry analyses should provide duration, phase and amplitude measures of 24 h exposure profiles. Exponential smoothing is used to derive suitable metrics from 24 h light measurements collected from private dwellings. A further application of these modified exposure time series as physiological models of the light drive is discussed. Unlike previous light drive models, the dose rate persists into periods of darkness following exposures. Comparisons to long duration exposure studies suggest this type of persistent light drive model could be incorporated into contemporary physiological models of the human circadian oscillator.     

Asymmetric synthesis of piperidines and octahydroindolizines using a one-pot ring-closure/N-debenzylation procedure

The conjugate addition of an enantiopure lithium amide to a ζ-hydroxy-α,β-unsaturated ester followed by a one-pot ring-closure/N-debenzylation protocol has been used in the asymmetric syntheses of (S)-coniine and (R)-δ-coniceine (isolated as the corresponding hydrochloride salts), and (R,R)-1-(hydroxymethyl)octahydroindolizine (the bicyclic fragment of stellettamides A-C).     

Exploring the first steps in core-shell electrocatalyst preparation: in situ characterization of the underpotential deposition of Cu on supported Au nanoparticles

The underpotential deposition (upd) of a Cu shell on a non-Pt nanoparticle core followed by galvanic displacement of the Cu template shell to form core-shell electrocatalyst materials is one means by which the Pt-based mass activity targets required for commercialization of PEM fuel cells may be reached. In situ EXAFS measurements were conducted at both the Au L(3) and the Cu K absorption edges during deposition of Cu onto a carbon-supported Au electrocatalyst to study the initial stages of formation of such a core-shell electrocatalyst. The Au L(3) EXAFS data obtained in 0.5 mol dm(-3) H(2)SO(4) show that the shape of the Au core is potential dependent, from a flattened to a round spherical shape as the Cu upd potential is approached. Following the addition of 2 mmol dm(-3) Cu, the structure was also measured as a function of the applied potential. At +0.2 V vs Hg/Hg(2)SO(4), the Cu(2+) species was found to be a hydrated octahedron. As the potential was made more negative, single-crystal studies predict an ordered bilayer of sulfate anions and partially discharged Cu ions, followed by a complete/uniform layer of Cu atoms. In contrast, the model obtained by fitting the Au L(3) and Cu K EXAFS data corresponds first to partially discharged Cu ions deposited at the defect sites in the outer shell of the Au nanoparticles at -0.42 V, followed by the growth of clusters of Cu atoms at -0.51 V. The absence of a uniform/complete Cu shell, even at the most negative potentials investigated, has implications for the structure, and the activity and/or stability, of the core-shell catalyst that would be subsequently formed following galvanic displacement of the Cu shell.     

Solid phase extraction of DNA from biological samples in a post-based, high surface area poly(methyl methacrylate) (PMMA) microdevice

This work describes the performance of poly(methyl methacrylate) (PMMA) microfluidic DNA purification devices with embedded microfabricated posts, functionalized with chitosan. PMMA is attractive as a substrate for creating high surface area (SA) posts for DNA capture because X-ray lithography can be exploited for extremely reproducible fabrication of high SA structures. However, this advantage is offset by the delicate nature of the posts when attempting bonding to create a closed system, and by the challenge of functionalizing the PMMA surface with a group that invokes DNA binding. Methods are described for covalent functionalization of the post surfaces with chitosan that binds DNA in a pH-dependent manner, as well as for bonding methods that avoid damaging the underlying post structure. A number of geometric posts designs are explored, with the goal of identifying post structures that provide the requisite surface area without a concurrent rise in fluidic resistance that promotes device failure. Initial proof-of-principle is shown by recovery of prepurified human genomic DNA (hgDNA), with real-world utility illustrated by purifying hgDNA from whole blood and demonstrating it to be PCR-amplifiable.